|
|
Application of digital delivery in continuous casting engineering construction and production |
JIN Xiao-hui, QIAO Jian-ji, NIU Jing-chao |
Baosteel Engineering and Technology Group Co., Ltd., Shanghai 201900, China |
|
|
Abstract In order to achieve the transformation and upgrading of continuous manufacturing of intelligent manufacturing in a domestic steel plant, to solve the problems of information fragmentation, query and use in the original blueprint delivery, and the inability to extend the information to the full life cycle, a new digital delivery model was adopted. The characteristics of digital delivery was analyzed, the data types of the data center was organized, the standards that need to be established for delivery was clarified, the processes that need to be established for digital delivery was regulated, and the functional scope of digital delivery was determined. Through digital delivery, engineering companies can improve their ability to work collaboratively and accelerate their role as full-life-cycle service providers; establish digital assets for production companies, promote the digital operation system of factories, and realize the rapid development of intelligent manufacturing.
|
Received: 04 December 2019
|
|
|
|
[1] |
张曙. 工业和智能制造[J], 机械设计与制造工程, 2014,43(8):1.
|
[2] |
陆小武. 1 450 mm板坯连铸机改造扇形段设计与实践[J], 连铸, 2018,43(6):42.
|
[3] |
贺正楚,潘红玉. 德国“工业”与“中国制造[J], 长沙理工大学学报:社会科学版, 2015,30(3):103.
|
[4] |
王国法,杜毅博. 德国工业4.0与中国煤机装备智能制造的发展[J], 煤炭科学技术, 2019,47(3):1.
|
[5] |
张娜,张亚东,丁小林,等. 湛江2150 mm板坯连铸机工艺设计[J], 连铸, 2017,42(2):69.
|
[6] |
寿海涛. 数字化工厂与数字化交付[J], 石油化工设计, 2017,34(1):44.
|
[7] |
韩俊. 安钢方圆坯连铸机设计特点和生产实践[J], 连铸, 2016,41(2):48.
|
[8] |
孙莉,戴玮. 基于的公路桥梁工程数字化交付方法初探[J], 研究与探索, 2015,29(6):749.
|
[9] |
孟力,张宏宇. 工程项目全生命周期管理组织模式研究[J], 项目管理技术, 2009,7(1):26.
|
[10] |
杨博,黄进春,王文学,等. 国外板坯连铸项目进度管理浅谈[J], 连铸, 2019,44(2):78.
|
[11] |
刘青,王彬,汪宙,等. 高品质钢炼钢—连铸过程的精益制造[J], 连铸, 2016,41(3):1.
|
[1] |
Fan Qian, Hua-long Li, Wen-gang Yang, Hai-rong Guo, Guo-qi Liu, Hong-xia Li, Bei-yue Ma. Corrosion resistance of BN–ZrO2 ceramics with different additives by molten steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(7): 1101-1109. |
[2] |
ZHANG Xiang,XIE Qinghua,NI Peiyuan,LI Ying. Flow behavior of molten steel in SEN during fullnozzle selfswirling flow continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 629-638. |
[3] |
ZHAO Xianjiu1,2,ZHANG Jieyu2,3,LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
[4] |
SHANG Ting-rui, WANG Wei-ling, KANG Ji-bai, ZHU Miao-yong, LUO Sen. In situ observation of solidification under transient and average cooling rate of 20CrMnTi continuous casting[J]. Iron and Steel, 2022, 57(7): 73-85. |
[5] |
CHEN Bin, LI Hai-bo, JI Chen-xi, LIU Guo-liang, ZHOU Hai-chen. Influence of casting parameters on level fluctuations and its industrial application[J]. Iron and Steel, 2022, 57(7): 86-94. |
[6] |
KANG Yong-lin, ZHU Guo-ming, JIANG Min, WANG Guo-lian, LIU Peng-tao, XU Hai-wei, XIE Cui-hong, WEI Yun-fei, SHEN Kai-zhao, LIU Yang. Slab continuous casting by big roll heavy reduction and extra thick plate rolled by low compression ratio[J]. Iron and Steel, 2022, 57(7): 95-105. |
|
|
|
|