|
|
Hydraulic control and fault diagnosis for DANIELI continuous casting machine segment |
YAN Fan-xi, DONG Wei, WANG Jian-jun, WEI He-ming, MAO Zhan-xin, DING Jian |
Steelmaking Department, Shougang Jingtang United Iron and Steel Co., Ltd., Tangshan 063200, Hebei, China |
|
|
Abstract Principle and fault diagnosis of DANIELI continuous casting machine fan segment hydraulic control were briefly introduced, which is of guiding significance to the daily maintenance and transformation of the hydraulic control system.Through the control of the roll gap at the entrance and exit of each sector, the control of the light pressure was realized.
|
Received: 12 January 2020
|
|
|
|
[1] |
郭勇. 宝钢三铰链点扇形段辊缝间隙控制技术应用[J].中国冶金,2020,30(2):89.
|
[2] |
刘赵卫,李新强,曾晶.板坯连铸机扇形段结构形式探讨与研究[J].连铸,2019,44(6):74.
|
[3] |
吕士金,秦勇.典型活动扇形段改造[J].连铸,2019,44(1):61.
|
[4] |
陆小武. 1 450 mm板坯连铸机改造扇形段设计与实践[J].连铸,2018,43(6):42.
|
[5] |
李瑞生,赵艳良,罗北平,等.连铸二级系统升级及拓展的探讨与实践[J].中国冶金,2018,28(12):60.
|
[6] |
闫凡熙,肖华生. DANIELI 2150连铸机浇铸状态自动更换中间包浸入式水口设计[J].连铸,2019,44(6):80.
|
[7] |
刘建伟. 宽厚板坯连铸机引锭头的应用技巧[J].宽厚板,2012,18(1):15.
|
[8] |
朱广宇. 连铸扇形段连铸辊力学性能分析[J].化学工程与装备,2019(1):199.
|
[9] |
刘亮. 奥钢联板坯铸机驱动力报警问题的分析及改进[J].中国冶金,2019,29(1):52.
|
[10] |
陈敏,秦文彬.板坯连铸机扇形段有限元分析[J].冶金设备,2013(1):41.
|
[11] |
时彦林,李建朝.连续铸钢生产[M].北京:化学工业出版社.2011.
|
[12] |
时彦林,侯维芝. 液压传动[M]. 3版.北京:化学工业出版社.2015.
|
[13] |
孙博,王臻明,段雪亮,等.论连铸机对弧测量的原理性差异及对比分析[J].连铸,2018,43(5):63.
|
[14] |
秦文彬. 无间隙辊缝调节扇形段的研发及运用[J].连铸,2018,43(3):1.
|
[15] |
宋胜德. 攀钢2号大方坯连铸机优化设计及改造[J].连铸,2015,40(3):40.
|
[1] |
FAN Xing-chen. Research and application of improving functional accuracy of sector section[J]. CONTINUOUS CASTING, 2020, 39(2): 58-61. |
[2] |
[LU]Shi-jin,QIN Yong. Modification of typical movable segment[J]. , 2019, 38(1): 61-65. |
[3] |
LU Xiao-wu. Design and practice on segment revamping for 1450 mm slab caster[J]. , 2018, 37(6): 42-46. |
[4] |
SUN Bo,WANG Zhen-ming,DUAN Xue-liang,WANG Guo-lian,JIANG Hai-tao5. The principle difference and comparative analysis of alignment measure in continuous caster[J]. , 2018, 37(5): 63-66. |
[5] |
JIANG Zong-ming. Innovative design of fan-section roller structure for bloom caster[J]. , 2018, 37(5): 67-69. |
[6] |
QIN Wen-bin. Development and application of clearance-free roll gap adjustable segments[J]. , 2018, 37(03): 1-6. |
|
|
|
|