包钢CSP热轧卷板纵裂缺陷分析与控制

doi:10.13228/j.boyuan.issn1005-4006.20200039

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (3957 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the cause of longitudinal crack defect of hot rolled coil in CSP production line of thin plate factory, continuous casting process and operating parameters of equipment were investigated and analyzed. The results show that the poor vibration accuracy of vibrating table of continuous casting machine and scaling of the copper plate in the mould are the main reasons for the longitudinal crack of hot rolling.After adjusting the vibration parameters, improving the alignment accuracy of the shaking table and controlling the scale formation of the copper plate, the longitudinal crack defect on the surface of the hot rolled coil plate was reduced, and the longitudinal crack rate decreased from the highest 1.15% to less than 0.10%.In view of CSP casting machine, on the premise of ensuring good thermal conductivity of the mould copper plate, the joint bearing clearance of the four-link mechanism of the mould vibrator should be strictly controlled within 0.02 mm.Elevation deviation of shaking table should be strictly controlled within 0.05 mm.Horizontal displacement of mould vibration is suggested to be controlled within 0.1 mm.

Key words： CSP hot rolled slab longitudinal crack mould copper plate vibrator

Received: 08 April 2020

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	MA Chao
	SUN Li-gang
	ZHANG Wei
	GUAN Sheng
	JIA Gui-jun

Cite this article:

MA Chao,SUN Li-gang,ZHANG Wei等. Analysis and control of longitudinal crack on hot rolled coil in CSP plant of Baotou Steel[J]. CONTINUOUS CASTING, 2020, 39(4): 54-59.

URL:

http://www.chinamet.cn/Jweb_lz/EN/10.13228/j.boyuan.issn1005-4006.20200039 OR http://www.chinamet.cn/Jweb_lz/EN/Y2020/V39/I4/54

[1]	张剑君,毛新平,王春峰,等.薄板坯连铸连轧炼钢高效生产技术进步与展望[J].钢铁,2019,54(5):1.
[2]	郭海峰,张志克,唐章印.邯钢CSP连铸机常见漏钢形式以及预防措施[J].冶金管理,2019(11):60.
[3]	隋亚飞,徐刚军,周军军,等.CSP含铝电工钢水口堵塞问题的研究和解决[J].连铸,2019,44(4):1.
[4]	谭文,韩斌,蔡珍,等.武钢CSP短流程优质中高碳钢的开发及应用[J].轧钢,2017,34(6):10.
[5]	肖尊湖,隋亚飞,刘彭,等.CSP工艺含铝无取向电工钢中夹杂物的演变和控制[J].钢铁,2019,54(7):42.
[6]	韩玉龙,高军,乔继强.CSP流程无取向硅钢中间品处理方案[J].轧钢,2019,36(2):67.
[7]	李瑞生,赵艳良,罗北平,等.连铸二级系统升级及拓展的探讨与实践[J].中国冶金,2018,28(12):60.
[8]	杨婷. 薄板坯连铸-连轧技术的发展[J]. 世界金属导报,2017-01-24(B03).
[9]	George Gurley. 水处理对CSP钢厂产品质量和产能的影响[C]//第十七届(2013年)全国炼钢学术会议论文集:B卷.杭州:中国金属学会,2013:807.
[10]	蔡开科. 连铸坯质量控制[M].北京:冶金工业出版社,2010.