|
|
Industrial test and application on high casting speed mold flux for low carbon steel slab |
WEN Ju-wen1,2, GUO Yin-tao1,2, ZHAO Xiao-hu1, QIN Cong1, LI Hui-ya1 |
1. Technology and Quality Department, Tangshan Stainless Steel Co., Ltd., Tangshan 063000, Hebei, China; 2. Hebei Technology Innovation Center, Tin-Plated Substrate, Tangshan 063000, Hebei, China |
|
|
Abstract Increment of the casting speed is an effective means to increase the efficiency of steelmaking production line. The continuous casting mold flux is an important technical link in the high casting speed technologies. Three kinds of low carbon steel high drawing speed mold flux (I, II, III) have been studied from the physical and chemical properties, use performance and use effect in industrial field. Through preliminary industrial tests, it was found that the thickness of the liquid slag layer of mold flux III is reasonable, high consumption, low friction, strong heat transfer capacity, high saturated heat flux, and low entrapped slag index of hot-rolled coils. Mold flux III was used for the high-speed conventional production of low-carbon steel slabs. More than 500 furnaces of low-carbon steel were casted at casting speed of 1.80-1.95 m/min. No adhesion alarm occurred, and the rate of entrapped slag was only 0.47%.
|
Received: 29 November 2020
|
|
|
|
[1] |
白丙中.世界高效连铸技术的发展现状及发展我国高效连铸技术的建议[J]. 鞍钢技术, 1997(9): 4.
|
[2] |
孟祥宁,朱苗勇.连铸结晶器振动理论与工艺[M]. 北京:科学出版社,2018.
|
[3] |
Asano M, Hirata A, Hayashi H. High quality and high speed casting technologies for round billet caster[C]// The 4th China Steel Annual Meeting. Beijing: The Chinese Society for Metals,2007:321.
|
[4] |
朱立光,袁志鹏,肖鹏程,等.高拉速薄板坯连铸中碳钢保护渣开发与应用[J]. 连铸,2020(1):51.
|
[5] |
汪洪峰,邹俊苏.高拉速板坯连铸机漏钢原因分析及预防措施[J]. 连铸,2007 (6): 10.
|
[6] |
邓小旋,潘宏伟,季晨曦,等.常规低碳钢板坯的高速连铸工艺技术[J].钢铁,2019,54(8):70.
|
[7] |
朱国森,季晨曦,刘洋,等. 首钢板坯连铸技术进步[J]. 中国冶金, 2019, 29(8): 1.
|
[8] |
殷瑞钰. 新世纪以来中国炼钢-连铸的进步及命题[J]. 中国冶金, 2014, 24(8): 1.
|
[9] |
杨晓江.薄板坯连铸结晶器保护渣技术[J].炼钢,2002(4):47.
|
[10] |
朱立光, 袁志鹏, 肖鹏程, 等. 低碳钢薄板坯高速连铸保护渣研究与优化[J]. 钢铁, 2020, 55(11): 65.
|
[11] |
罗冰,曾令宇,陈权,等.小方坯连铸机高拉速技术改造和生产实践[J].连铸,2019 (2):22.
|
[12] |
王永胜. 高拉速板坯连铸结晶器液面波动影响因素研究[J]. 中国冶金, 2009, 19(9): 24.
|
[13] |
段大福.高拉速用连铸保护渣的研究现状[J]. 炼钢, 2005(1):53.
|
[14] |
蔡开科.连铸结晶器[M]. 北京:冶金工业出版社, 2008.
|
[1] |
Fan Qian, Hua-long Li, Wen-gang Yang, Hai-rong Guo, Guo-qi Liu, Hong-xia Li, Bei-yue Ma. Corrosion resistance of BN–ZrO2 ceramics with different additives by molten steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(7): 1101-1109. |
[2] |
ZHANG Xiang,XIE Qinghua,NI Peiyuan,LI Ying. Flow behavior of molten steel in SEN during fullnozzle selfswirling flow continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 629-638. |
[3] |
ZHAO Xianjiu1,2,ZHANG Jieyu2,3,LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
[4] |
SHANG Ting-rui, WANG Wei-ling, KANG Ji-bai, ZHU Miao-yong, LUO Sen. In situ observation of solidification under transient and average cooling rate of 20CrMnTi continuous casting[J]. Iron and Steel, 2022, 57(7): 73-85. |
[5] |
CHEN Bin, LI Hai-bo, JI Chen-xi, LIU Guo-liang, ZHOU Hai-chen. Influence of casting parameters on level fluctuations and its industrial application[J]. Iron and Steel, 2022, 57(7): 86-94. |
[6] |
KANG Yong-lin, ZHU Guo-ming, JIANG Min, WANG Guo-lian, LIU Peng-tao, XU Hai-wei, XIE Cui-hong, WEI Yun-fei, SHEN Kai-zhao, LIU Yang. Slab continuous casting by big roll heavy reduction and extra thick plate rolled by low compression ratio[J]. Iron and Steel, 2022, 57(7): 95-105. |
|
|
|
|