ANSYS软件在连铸过程中的应用

doi:10.13228/j.boyuan.issn1005-4006.20210104

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (3262 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The continuous casting metallurgical process is very complex and accompanied by high temperature. It is difficult to observe by using the traditional research methods such as human eye method and physical experiment method, but the numerical simulation technology can make up for this deficiency.The finite element software ANSYS is widely used in continuous casting for its accuracy, safety and reliability. The research status of ANSYS in continuous casting was introduced, application of ANSYS in ladle, tundish, mould, secondary cooling zone and air cooling zone has been discussed in detail. Finally, in order to combine ANSYS with continuous casting better, the development trends of ANSYS in the continuous casting was also pointed out.

Key words： continuous casting ANSYS numerical simulation application development trend

Received: 09 September 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Hai-long
	CEN Chuan-fu
	CAO Yu
	ZHONG Shan

Cite this article:

WU Hai-long,CEN Chuan-fu,CAO Yu等. Application of ANSYS software in continuous casting[J]. CONTINUOUS CASTING, 2022, 41(1): 1-8.

URL:

http://www.chinamet.cn/Jweb_lz/EN/10.13228/j.boyuan.issn1005-4006.20210104 OR http://www.chinamet.cn/Jweb_lz/EN/Y2022/V41/I1/1

[1]	冯辉君,陈林根,刘雄,等.薄板坯连铸连轧流程数值分析[J].钢铁研究,2015,43(4):23.
[2]	付谦惠,郭峻宇.韶钢连铸方坯脱方缺陷的成因及其改善研究[J].科技视界,2017(6):148.
[3]	苏志祁,何庆,谢植.基于光流分析法检测钢水液位[J].东北大学学报(自然科学版),2018,39(2):158.
[4]	王波,沈诗怡,阮琰炜,等.冶金过程中的气液两相流模拟[J].金属学报,2020,56(4):619.
[5]	杨以月.基于ANSYS的连铸坯二冷区温降与热应力的数值模拟[D].青岛: 青岛理工大学,2010.
[6]	仇德金,张朝晖,冯璐,等.连铸过程中夹杂物去除数值模拟研究现状[J].钢铁研究学报,2020,32(11):937.
[7]	张朝晖,吴海龙,冯璐,等.数值模拟技术在连铸结晶器中的应用[J].钢铁研究学报,2016,28(5):1.
[8]	Sengupta J, Yavuz M M. Nozzle design for ArcelorMittal Dofasco's No. 1 continuous caster for minimizing sliver defects[J].Iron and Steel Technology, 2011, 8(7):39.
[9]	刘增勋,张朝阳,肖鹏程,等.冷却工艺对高速连铸结晶器传热的影响[J].钢铁,2021,56(5):41.
[10]	章裕琳,王永洪,何保卫,等. 板坯连铸凝固传热有限元分析[C]//2015连铸装备的技术创新和精细化生产技术交流会会议论文集.西安:中国金属学会,2015.
[11]	赵海伦.基于ANSYS的EMS小车结构分析和优化设计[J].智能制造,2021(3):124.
[12]	高兴军,赵恒华.大型通用有限元分析软件ANSYS简介[J].辽宁石油化工大学学报,2004(3):94.
[13]	Ebina K, Fujii K, Shimono S, et al. Development of the hard reduction method in the No.3 bloom caster at Kobe works, Kobe Steel[J].Revue De Métallurgie, 1992, 89(9):783.
[14]	Rodrigues E F, Medeiros E B, Figueira R M. Heat loss and liquid steel flow in metallurgical ladles during holding period in continuous casting[J].Begel House Inc, 1997:1.
[15]	Anwar M E, Megahed G M, Bedewy M K, et al. Simulation of fluid flow and heat transfer in thin slab casting process[C]// The 9th International Mining, Petroleum, and Metallurgical Engineering Conference (MPM), Egypt: Cairo University, 2005.
[16]	Bielnicki M, Jowsa J, Cwudziński A. Multiphase numerical model of molten steel and slag behavior in the continuous casting mould[J].Archives of Metallurgy and Materials, 2015, 60(1):257.
[17]	Trindade L B, Nadalon J, Contini A C, et al. Modeling of solidification in continuous casting round billet with mold electromagnetic stirring (M-EMS)[J].Steel Research International, 2017, 88(4):1600319.
[18]	Srinivas P S, Mishra D K, Kulkarni A B, et al. Investigation of vortex flow patterns at the meniscus in a water caster mould[J].Canadian Metallurgical Quarterly, 2020, 59(2): 211.
[19]	龚涛,杨海西,邓康.连铸过程中结晶器内流体流动和温度传输的数值模拟[J].计算物理,2000(6):690.
[20]	娄娟娟,包燕平,刘建华, 等.连铸异型坯凝固过程的数值模拟[J].北京科技大学学报,2005(2):173.
[21]	孙向东,朱立光,朱新华. 圆坯连铸工艺参数对铸坯凝固的影响与分析[C]// 2013年低成本炼钢技术交流论坛论文集.无锡:山东省科学技术协会,2013.
[22]	何肖飞,李林平.连铸机不对称浇铸对中间包钢液的影响[J].钢铁研究学报,2018,30(4):288.
[23]	姜向盈,田琳,张小宁, 等.基于ANSYS程序的钢包用不同材质滑板温度场研究[J].耐火材料,2020,54(5):438.
[24]	王波,刘令远,周玉军, 等.钢包耐火材料对钢液质量和温降的影响[J].中国金属通报,2018(9):200.
[25]	徐海强,王胜,郭士萌, 等.钢包钢水保温技术效果对比[J].河北冶金,2020(3):61.
[26]	王崇.300 t钢包扩容改造实践[J].河北冶金,2021(4):58.
[27]	李公法,刘泽,孔建益, 等.新型钢包的温度场及其影响因素模拟分析[J].武汉科技大学学报,2015,38(6):401.
[28]	刘志远,罗志国,顾英杰, 等.旋流钢包长水口对夹杂物碰撞聚合影响的数值模拟[J].钢铁研究学报,2021,33(5):408.
[29]	张莉,李京社,张江山, 等.四流T型中间包控流装置优化的水模拟分析[J].重庆大学学报,2015,38(5):119.
[30]	熊洪进,陈列,董贵文.圆坯连铸机中间包流场流动特性研究[J].特钢技术,2021,27(1):1.
[31]	郑瑞轩,赵立华,姚骋, 等.四流中间包流场影响因素分析与优化[J].炼钢,2021,37(1):63.
[32]	Kowitwarangkul P, Kamonrattanapisud M, Juntasaro E, et al. CFD simulation of molten steel flow with isothermal condition in the continuous casting tundish[J].Applied Science and Engineering Progress, 2016, 9(2): 71.
[33]	麻永林,刘进飞,邢淑清, 等.连铸中间包通道式电磁感应加热数值模拟[J].连铸,2016 (6):50.
[34]	Warzecha P, Hutny A, Warzecha M, et al. Optimization of steel flow in the tundish by modifying its working area[J].Archives of Metallurgy and Materials, 2016, 61(4):2071.
[35]	金泽洪. WAMTM公司特殊钢大方坯连铸成套技术的发展[C]//大方坯圆坯异型坯连铸技术研讨会论文集.包头:中国金属学会,2007.
[36]	谭金池,张斌,袁富, 等.板坯连铸结晶器三维流场模拟仿真研究[J].江西冶金,2020,40(6):11.
[37]	陈登明,王宏丹,杨治立.板坯连铸结晶器内钢液的三维流场数值模拟[J].热加工工艺,2011,40(7):69.
[38]	王洪兴,曹梅林,刘志国.结晶器内钢液面波动分析与控制[J].炼钢,2012,28(3):37.
[39]	李康康,张彩军,肖鹏程, 等.高拉速薄板坯连铸结晶器钢渣界面波动分析[J].连铸,2021(1):9.
[40]	Novak J S, Benasciutti D, Bona F D, et al. Thermo-mechanical finite element simulation and fatigue life assessment of a copper mould for continuous casting of steel[J].Procedia Engineering, 2015, 133:688.
[41]	陈耀,罗森,王卫领, 等.大方坯连铸结晶器电磁搅拌下钢液流动行为的数值模拟[C]//2018年(第二十届)全国炼钢学术会议大会报告及论文摘要集.成都:中国金属学会,2018:1.
[42]	Chakraborty S, Ganguly S, Talukdar P. Determination of optimal taper in continuous casting billet mould using thermo-mechanical models of mould and billet[J].Journal of Materials Processing Technology, 2019, 270:132.
[43]	徐旺,刘增勋,肖鹏程, 等.方坯表面纵裂的数值模拟研究[J].炼钢,2020,36(2):48.
[44]	李富帅,谢长川,郭春光, 等.方坯高效连铸新型结晶器传热分析与应用[J].冶金设备,2020(1):46.
[45]	陈庆. 异型坯连铸二冷区温度与应力的数值模拟研究[D].马鞍山: 安徽工业大学,2019.
[46]	卢雄慧.异型坯连铸二冷工艺优化研究[J].冶金与材料,2020,40(5):10.
[47]	杨以月,林晨,赵小军.方坯二冷热应力分析[J].热加工工艺,2010,39(19):75.
[48]	朱新华,朱立光,孙向东, 等.石油套管用钢37Mn5 ø210 mm连铸圆坯凝固过程的数学模拟和工艺优化[J].特殊钢,2014,35(6):5.
[49]	Androsenko M, Kulikova E, Osipova O. Improvement in billets quality from billet caster by roller suspension of secondary cooling zone stiffening[J].MATEC Web of Conferences, 2018, 224:02048.
[50]	张开,陈士富,杨滨, 等.板坯二冷区电磁搅拌辊布置方式[J]辽宁科技大学学报,2018,41(5):335.
[51]	徐正彪,王延苹,刘瑞刚, 等.热轧H型钢空冷温降模型研究及应用[J].热处理技术与装备,2021,42(1):55.
[52]	李长生,何晓明,刘相华, 等.固相板坯空冷过程温度场有限元分析[J].东北大学学报,2000(4):427.
[53]	肖宏,刘剑,余超.板坯直轧感应加热的有限元模拟[J].钢铁研究学报,2016,28(8):44.