|
|
Analysis of sticking mechanism and control practice on SPA-H |
SONG Jiayou1, YANG Chunbao1, LI Bin1, LUO Yanzhao2 |
1. Steelmaking Department, Shougang Jingtang United Iron and Steel Co., Ltd., Tangshan 063200, Hebei, China; 2. Shougang Research Institute of the Technology, Shougang Group Corporation, Beijing 100041,China |
|
|
Abstract The sticking rate of SPA-H in a domestic steel plant is at a high level, which affects the quality of slab and production stability. In order to effectively control the sticking of SPA-H steel grades and further reduce the sticking rate of SPA-H, the factors affecting the sticking of SPA-H were analyzed statistically and comparatively. It was concluded that in addition to the mould powder, the process system, the operation difference of the team and the selection of the breakout preventing systems were also important factors affecting the sticking of SPA-H steel grades. By reducing the alkalinity to 1.35, melting point to about 50 ℃ and other mould powder performance adjustment, reducing the mold taper of 0.04%/m, improving the superheat of molten steel qualified rate, unsteady stage operation optimization and steel breakout preventing systems reform, SPA-H sticking rate from the initial more than 10% gradually reduced to less than 3%. The sticking rate of SPA-H is effectively reduced.
|
Received: 07 June 2023
|
|
|
|
[1] |
文鹏,俆书强.板坯黏结漏钢的原因分析及预防措施[J].连铸, 2013(3):4.
|
[2] |
何宇明.大型板坯连铸机漏钢预防技术[J].连铸, 2017(1):41.
|
[3] |
王叶婷,赵洪强,国兴龙,等.连铸黏结漏钢成因机理分析[J].连铸,2011(s1):134.
|
[4] |
冯建勋.结晶器专家系统在连铸机的应用[J].连铸,2010(6):19.
|
[5] |
刘永贞,王旭东,贾启忠,等.结晶器内黏结漏钢及其传播行为的研究[J].炼钢,2009(3):45.
|
[6] |
史宸兴.实用连铸冶金技术[M].北京:冶金工业出版社,1998.
|
[7] |
曾智,赵洪强,王叶婷,等.板坯连铸过程中黏结点和热点行为研究[J].连铸, 2011(s1):103.
|
[8] |
邓勇,杨利彬,汪成义.马钢低碳钢板坯高拉速连铸技术的应用[J].连铸,2022(1):72.
|
[9] |
韩立海,姜英,唐作宇.薄板坯连铸的黏结机制分析及控制实践[J].连铸,2014(6):7.
|
[10] |
马学忠.板坯连铸机黏结漏钢与保护渣的关系[J].炼钢,1996(2):7.
|
[11] |
宁伟.降低厚板坯连铸机结晶器漏钢预报专家系统误报率的技术研究与应用[J].宽厚板,2020,26(5):26.
|
[12] |
李殿明,邵明天,杨宪礼,等.连铸保护渣应用技术[M].北京:冶金工业出版社, 2008.
|
[13] |
杨晓江,郝华强.薄板坯连铸黏结的分析与预防[J].钢铁研究,2004(3):4.
|
[14] |
杨建华.板坯连铸黏结漏钢控制技术的生产实践[J].价值工程,2012(21):25.
|
[15] |
田燕翔.现代连铸新工艺、新技术与铸坯质量控制[M].北京:当代中国出版社,2004.
|
[16] |
唐生斌.结晶器漏钢预报在攀钢2号板坯l连铸机上的应用.[J].连铸, 2005(5):41.
|
[17] |
陶乃标.宽厚板坯连铸结晶器漏钢预报模型研究[D].沈阳:东北大学,2012.
|
[18] |
何飞,贺东风,周俐,等.连铸结晶器漏钢预报模型研究进展[J].铸造技术,2015,36(6): 1528.
|
[19] |
职建军.宝钢板坯连铸漏钢预报技术的进展[J].宝钢技术,2007(6):69.
|
[20] |
高宇,张燕平,张士慧,等.结晶器漏钢预报专家系统的开发与应用[J].河北冶金,2020(1):20.
|
[1] |
LUO Sen, ZHU Miaoyong. State of art on solidification characteristics and continuous casting process of high manganese steel[J]. Iron and Steel, 2023, 58(9): 39-58. |
[2] |
LIU Chengjun, QI Jie, JIANG Maofa. Design and application of new mold flux for high-Al steel continuous casting[J]. Iron and Steel, 2023, 58(9): 116-126. |
[3] |
ZHENG Yihao1,2,QI Jie1,2,ZHENG Xiang1,2,LIU Chengjun1,2,JIANG Maofa1,2. Dissolution behavior of CeAlO3 in mold fluxes with different w(CaO)/w(Al2O3)[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2023, 35(9): 1092-1099. |
[4] |
WU Xiaoxiao, XI Zaihui, HE Shengping, WANG Qiangqiang, ZHANG Xubin. Exploration of Li2O reduction by mold flux for high quality low carbon steel slab continuous casting[J]. Iron and Steel, 2023, 58(8): 110-119. |
[5] |
ZHAO Bingbing, YUAN Tianxiang, LIU Yanqiang, QIAO Huanshan. Cause analysis and preventive measures of steel leakage in slab continuous casting[J]. CONTINUOUS CASTING, 2023, 42(6): 36-40. |
[6] |
QI Jie, ZHANG Jianghao, LIU Chengjun. Effect of different flux raw material types on physical and chemical properties of CaO-Al2O3 based mold fluxes[J]. CONTINUOUS CASTING, 2023, 42(6): 49-54. |
|
|
|
|