|
|
Numerical modelling on solidification and heat transfer process of micro-alloyed steel bloom |
CAI Dawei1,2, LU Jingzhou3, DOU Kun3, PAN Weiming3 |
1. Xiangjiang Laboratory, Changsha 410205, Hunan, China; 2. Technology Research Institute, Hunan Iron and Steel Group,Changsha 410004,Hunan,China; 3. School of Metallurgy and Environment, Central South University,Changsha 410083,Hunan,China |
|
|
Abstract Aiming at the realistic issues of large variations in casting speed as well as the non-uniform distribution in secondary cooling water, a finite element mathematical model for non-steady state solidification and heat transfer in two-dimensions was established based on the main technical parameters of a micro-alloyed as-cast steel bloom caster. The thermo-physical parameters and solidification characteristics for the target steel was determined using CALPHAD approach. The effects of casting temperature and casting speed on solidification process were discussed by calculated on this basis. The results showed that the increase of casting temperature had relatively small impact on the surface temperature of billet. The center temperature in width increased successively 33.7,28.6 ℃,and the corner temperature increased 21.8,19.1 ℃ along with the casting speed increased from 0.50 m/min to 0.60 m/min. Further research on adjustment of water distribution need to be conducted to improve the phenomenon that excessive temperature recovery still existed.
|
Received: 01 June 2023
|
|
|
|
[1] |
周国涛,陈金,黄标彩,等.Q355B板坯连铸凝固传热行为数值模拟[J].连铸,2023(2):43.
|
[2] |
朱苗勇,蔡兆镇. 高拉速板坯连铸凝固传热行为及其均匀性控制[C]//第十三届中国钢铁年会论文集(摘要).北京:冶金工业出版社,2022:72.
|
[3] |
张思远. 基于在线测温与传热模型融合的连铸二冷动态控制模型研究[D].重庆:重庆大学,2021.
|
[4] |
孔意文. 高质量板坯的新型动态二冷控制和动态轻压下模型的研究[D].重庆:重庆大学,2020.
|
[5] |
冯永平,郑娜,唐磊,等.薄板坯连铸结晶器内钢水凝固传热数值模拟[J].连铸,2021(6):44.
|
[6] |
谢集祥,罗钢,刘浏,等.Q235B钢板坯连铸凝固传热行为的数值模拟计算[J].特殊钢,2020,41(2):10.
|
[7] |
李璐,周存龙,刘丽晶,等.HRB400钢热物性参数对小方坯连铸凝固传热模型影响的研究[J].连铸,2019(5):14.
|
[8] |
张振学,张慧,王明林,等.GCr15轴承钢大方坯连铸过程凝固传热数值模拟[J].铸造技术,2019,40(8):763.
|
[9] |
冯永山,侯雨阳,成国光.70号钢连铸过程的凝固传热模型与组织研究[J].连铸,2018(3):18.
|
[10] |
方庆. 大方坯连铸过程流动、传热、传质行为及凝固组织的模拟研究[D].武汉:武汉科技大学,2018.
|
[11] |
孙海波,李烈军,程晓文,等.连铸凝固传热时液相有效导热系数的定量化[J].钢铁研究学报,2015,27(5):35.
|
[12] |
WANG Y, ZHANG L. Fluid flow-related transport phenomena in steel slab continuous casting strands under electromagnetic brake[J]. Metallurgical and Materials Transactions B, 2011, 42(6): 1319.
|
[13] |
张磊, 翟冰钰, 王万林. 薄板坯连铸及其铸坯表面缺陷的形成机理[J]. 连铸, 2020, 45(4):7.
|
[14] |
DU F, WANG X, HAN X, et al. Analysis of non-uniform thermal behaviour of special steel during slab continuous casting[J]. Ironmaking and Steelmaking, 2018, 45(4): 350.
|
[15] |
LONG M, CHEN D. Study on mitigating center macro-segregation during steel continuous casting process[J]. Steel Research International, 2011, 82(7): 847.
|
[16] |
SHEN H, HARDIN R, MacKENZIE R, et al. Simulation using realistic spray cooling for the continuous casting of multi-component steel[J]. Journal of Materials Science and Technology, 2002, 18: 311.
|
[17] |
张晓峰, 李进, 周国强, 等. 板坯扫描测温与三维动态配水的应用[J]. 连铸, 2011(s1): 413.
|
[18] |
张晓峰, 刘洪波, 张爱霞, 等. 三维温度场计算模型在连铸动态配水中的工程应用[C]//2013连铸装备技术的科技进步与精细化学术研讨会论文集.西安:中国金属学会,2013: 71.
|
[19] |
窦坤,卿家胜,王雷,等.基于微观偏析模型的连铸方坯内裂纹敏感性研究[J].金属学报,2014,50(12):1505.
|
[20] |
窦坤. 钒微合金化钢连铸方坯凝固特性与组织性能研究[D].北京:北京科技大学,2017.
|
[21] |
DOU K, LIU Q. A new cooling strategy in curved continuous casting process of vanadium micro-alloyed YQ450 NQR1 steel bloom combining experimental and modeling approach[J]. Metallurgical and Materials Transactions A, 2020, 51(8): 3945.
|
[22] |
陈家祥.连续铸钢手册[M].北京:冶金工业出版社,1991.
|
[23] |
MIETTINEN J.Calculation of solidification-related thermophysical properties for steels[J].Metallurgical and Materials Transactions B,1997,28(2):281.
|
[24] |
王雷,卿家胜,窦坤,等.YQ450 NQR1高强耐候钢表面裂纹成因分析[J].炼钢,2015,31(4):72.
|
[25] |
MILLS K C.Equations for the calculation of the thermophysical properties of stainless steel[J].ISIJ International,2004,44(10):1661.
|
[1] |
LUO Sen, ZHU Miaoyong. State of art on solidification characteristics and continuous casting process of high manganese steel[J]. Iron and Steel, 2023, 58(9): 39-58. |
[2] |
ZHANG Zedong, TANG Jue, CHU Mansheng. Comprehensive evaluation on low carbon iron making technology of top gas recycling oxygen blast furnace[J]. Iron and Steel, 2023, 58(9): 81-91. |
[3] |
LIU Chengjun, QI Jie, JIANG Maofa. Design and application of new mold flux for high-Al steel continuous casting[J]. Iron and Steel, 2023, 58(9): 116-126. |
[4] |
ZHU Xiaowei, ZHAO Lijia, HE Ming, WANG Kai, JIN Baigang, WANG Qiang. Magnetic field optimization design of electromagnetic swirling flow in nozzle device for slab continuous casting[J]. Iron and Steel, 2023, 58(9): 127-136. |
[5] |
LI Kang, LI Xu, LI Xiaohua, WANG Qinglong, HAN Yuejiao. Analysis of flatness actuator efficiencies of SmartCrown mill[J]. Iron and Steel, 2023, 58(9): 148-156. |
[6] |
WU Xiaoxiao, XI Zaihui, HE Shengping, WANG Qiangqiang, ZHANG Xubin. Exploration of Li2O reduction by mold flux for high quality low carbon steel slab continuous casting[J]. Iron and Steel, 2023, 58(8): 110-119. |
|
|
|
|