|
|
Application of different combustion medium in slab cutting during continuous casting |
SHAO Kaixuan1, BAI Xiaolu2, JIANG Peng2, WANG Haijun1,2, CONG Junqiang1, QIU Shengtao1,3 |
1. School of Metallurgical Engineering, University of Technology Anhui, Ma'anshan 243000, Anhui, China; 2. No2 Steelmaking Works, Jiangsu Yong lron and Steel Group Co., Ltd.,Zhangjiagang 215628, Jiangsu, China; 3. National Research Center of Continuous Casting Technology, Central lron and Steel Research Institute Technology Center,Beijing 100083, China |
|
|
Abstract Under the background of the dual carbon policy, enterprises, and scientific research institutes actively carry out low-cost, high-efficiency, and environmentally friendly steel preparation technology. As one of the supporting processes of continuous casting production, cast billets flame cutting has attracted the attention of many enterprises and researchers. Energy-efficient cutting technology and environmentally friendly cutting methods will be the main direction of future flame-cutting development. Based on the actual demand, the cutting principle of flame cutting different combustion media was summarized, the cutting costs, cutting quality (cutting gap, cutting surface flatness, and dross amount), and cutting efficiency of different cutting media were comparatively analysed, and the research progress of flame cutting of continuous casting billet in iron and steel enterprises and scientific research institutes at domestic and international was summarized. On this basis, combined with the intelligent control hydrogen oxygen cutting technology developed by the author's team, pointed out the shortcomings of the current flame cutting and the future development trend are pointed out.
|
Received: 30 June 2024
|
|
|
|
[1] |
毋燕.浅析连铸坯火焰切割在龙钢的应用[J].中国高新技术企业,2014(9):25。
|
[2] |
贾志平. 连铸坯氢氧切割应用与碳排放研究[J]. 中国设备工程,2018(11):131.
|
[3] |
丁剑,王迅,苏小明. 氢氧切割技术在板坯连铸中的实践及应用[J]. 设备管理与维修,2020(5):147.
|
[4] |
周亚非,曹遂军.氧乙炔火焰切割回火原因分析与预防措施[J].石油化工建设,2019,41(增刊2):78.
|
[5] |
华自圭.火焰切割技术的发展与应用[J].焊接,1986(3):18.
|
[6] |
王易俗,王鸿儒.天然气稀土增益剂的工业效用[J].金属世界,2013(1):71.
|
[7] |
尚融雪,杨悦,高俊豪,等.掺氢天然气层流火焰传播速度试验研究[J].中国安全科学学报,2019,29(11):103.
|
[8] |
邱银富.氢氧气切割技术在首钢的应用[J].冶金管理,2021(23):80.
|
[9] |
张立通,谭晓东,王海明.连铸坯氢氧切割在包钢的应用[J].包钢科技,2019,45(2):26.
|
[10] |
赵激,张金柱.氢氧气切割连铸坯技术经济分析[J].贵州工业大学学报(自然科学版),2006(1):21.
|
[11] |
吉林,冯勋真.通钢氢氧焰切割试验的总结[J].冶金能源,2005(5):17.
|
[12] |
于金辉,尹文祥,安领军,等.氢氧切割技术在切割机上的应用分析[J].科技资讯,2012(26):82.
|
[13] |
ADEDAYO A V. Kinetics of oxyfuel gas cutting of steels[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2011, 33: 183.
|
[14] |
AKKURT A. The effect of cutting process on surface microstructure and hardness of pure and Al 6061 aluminium alloy[J]. Engineering Science and Technology, an International Journal, 2015, 18(3): 303.
|
[15] |
韩永馗,王智新,闫家树,等.大厚度钢锭氧-丙烷火焰切割热影响区组织及性能[J].焊接学报,2013,34(3):25.
|
[16] |
THIÉBAUD R, DREZET J M, LEBET J P. Experimental and numerical characterisation of heat flow during flame cutting of thick steel plates[J]. Journal of Materials Processing Technology, 2014, 214(2): 304.
|
[17] |
李国辉,顾春新,刘洪武,等.贝氏体钢火焰切割裂纹原因分析[J].金属加工(热加工),2022(04):92.
|
[18] |
郭琴.小方坯连铸机切割方式对比分析[J].山西冶金,2021,44(2):166.
|
[19] |
华自圭.火焰切割技术的发展与应用(一)[J].焊接,1986(3):1.
|
[20] |
岳志坤.板坯火焰切割机故障分析及改造[J].连铸,2021(3):54.
|
[21] |
卜寅年.氧-液化石油气与氧-乙炔火焰切割比较[J].煤气与热力,2003(4):220.
|
[22] |
中国焊接协会切割机具分会.现代切割技术的发展与应用[J].机械制造文摘(焊接分册),2012(2):23.
|
[23] |
杨兵兵.低碳钢薄板氧-乙炔火焰手工气割工艺研究[J].热加工工艺,2009,38(15):143.
|
[24] |
钱金川,包秀敏,李世伟.分离式氢氧机在连铸坯火焰切割中的应用[J].电焊机,2010,40(10):85.
|
[25] |
朱祥亮,王欣.减小小方坯火焰切割割口的探讨[J].河北冶金,2014(6):47.
|
[26] |
郑向东,杨登才,张银洲.方坯连铸机火焰切割系统改造[J].武钢技术,2012,50(4):6.
|
[27] |
吕凯辉.液压剪在连铸方坯的应用[J].甘肃冶金,2022,44(1):43.
|
[28] |
张敏,钟鹏,徐钢.板坯连铸机火焰切割工艺优化[J].河南冶金,2020,28(4):28.
|
[29] |
IANG G F. Cutting Technical Manual[M]. Beijing:China Machine Press,2017.
|
[30] |
冯焕公,王磊,高海涛.氧-天然气火焰切割试验及应用[J].金属加工(热加工),2013,685(10):71.
|
[31] |
PINZON C, OSAWA N, IKEGAMI Y. Influence of preheating flame composition on oxy-hydrogen gas cutting efficiency[C]//The 29th International Ocean and Polar Engineering Conference. Honolulu, Hawaii, USA: International Society of Offshore and Polar Engineers,2019.
|
[32] |
干勇.炼钢-连铸新技术800问[M].北京:治金工业出版社,2003.
|
[33] |
陈伯瑜.小方坯连铸用氢氧源火焰切割机技术优化[J].连铸,2001(4):15.
|
[34] |
杜丽明,黄万林. 氢氧切割技术在180 mm×(350~700) mm板坯连铸生产中的应用与推广[C]//2008年连铸设备技术交流会论文集,湘潭;中国金属学会连铸分会,2008:7.
|
[35] |
郭宝生.利用焦炉煤气替代乙炔切割金属材料[J].中氮肥,2000(2):16.
|
[36] |
楚晓梅.焦炉煤气进行工业切割的实际应用[J].化工施工技术,1999(2):40.
|
[37] |
聂祯华,高志杰,许红宣,等.连铸坯氢氧火焰切割经济分析[J].冶金设备,2007(增刊1):83.
|
[38] |
张向阳.关于连铸火焰切割用氢气百分含量调整的探索[J].科技风,2012(15):41.
|
[39] |
刘永启,王延遐.水电解氢氧焊割机的实用性研究[J].山东工程学院学报,1998(3):28.
|
[40] |
葛敦镕.LPG切割新技术在连铸机上的应用和探讨[J].冶金能源,1999(2):9.
|
[41] |
杨帆.天然气替代霞普气切割技术在冶金、加工行业的应用[J].黑龙江冶金,2013,33(6):43.
|
[42] |
李勇奇.城市天然气切割金属的实验应用研究[J].河南科技,2014(10):53.
|
[43] |
王建忠.宣钢方坯连铸切割用丙烷与焦炉煤气的气割分析[C]//2010年全国炼钢—连铸生产技术会议文集.迁安:中国金属学会,2010.
|
[44] |
肖锡群,刘建勋,廖明连.氢氧焰与剪机切割连铸坯经济技术分析对比[J].冶金设备,2001(01):52.
|
[45] |
吕勇.攀钢连铸机氢氧切割工艺技术研究[J].冶金动力,2008(2):11.
|
[46] |
胡雪林,于金辉,郝良慧.浅谈氢氧火焰切割在连铸的生产应用[J].科技资讯,2013(22):95.
|
[47] |
刘亚滨,宋晓仑.一种优质环保的新型工业切割气[J].金属世界,2013(1):68.
|
[48] |
高晗.石钢铸坯切割技术改造[J].河北冶金,2012(1):54.
|
[49] |
詹东升.新型焊割气在黑色金属及连铸坯火焰切割上的应用[J].冶金丛刊,2003(4):27.
|
[50] |
王一鸣,周光杰,刘晓玮.中厚板火焰切割工艺研究与火焰切割侧弯变形机理分析[J].金属材料与冶金工程,2023,51(4):27.
|
[51] |
秦聪,余作朋,温巨文,等.提高连铸板坯收得率的工业实践[J].天津冶金,2021(05):20.
|
[1] |
LI Zhe, YANG Xiaojiang, TIAN Wei, ZHANG Dayong, XIAO Pengcheng, LI Hongbin. Optimization of continuous casting process for peritectic high alumina steel 590DH[J]. CONTINUOUS CASTING, 2024, 43(1): 67-72. |
[2] |
LUO Sen, ZHU Miaoyong. State of art on solidification characteristics and continuous casting process of high manganese steel[J]. Iron and Steel, 2023, 58(9): 39-58. |
[3] |
KANG Yonglin, ZHU Guoming, CHEN Guijiang, QIN Zhe. Latest development of wide thin strip endless rolling technology in China[J]. Iron and Steel, 2023, 58(7): 1-8. |
[4] |
WANG Jingzhong, TU Kai, BAO Hansheng, CHEN Qiwei, WU Minghua, WANG Baoshun, DING Binhua, ZHANG Wei. Research and practice on influence of domestic continuous casting process on internal quality of billet[J]. CONTINUOUS CASTING, 2023, 42(5): 11-20. |
[5] |
ZHANG Ya-bing, WANG Dong-xing, ZHAO Li, ZUO Xiao-tan, HUANG Yan, YANG Wei-yong. Solute distribution of 35CrMnSi structural alloy steel billet under the effect of PMO[J]. CONTINUOUS CASTING, 2023, 42(2): 78-83. |
[6] |
LIN Hong-liang, SHANG Xiu-ling, SHI Bin-qing. Precipitation characteristics of the carbides for Mn13 high manganese steel slab during cooling[J]. CONTINUOUS CASTING, 2023, 42(1): 66-73. |
|
|
|
|