|
|
Detection and analysis of microstructure of cold rolled dual phase steel |
SU Chong-tao, GUO Xiao-jing, ZOU Hai-xia, ZHAO Guang-dong |
Benxi Iron and Steel(Group) Co., Ltd., Benxi 117000, China |
|
|
Abstract During the detection of microstructures of cold rolled dual phase steel optical microscope, it was found that the traditional color metallographic technique still had difficulties in the identification of microstructure, especially for the dual phase steels containing bainite or residual austenitic phase besides of ferrite and martensite. At the same time, there were also confusions and difficulties in the measurement of area content of the second phase. The area content of the second phase under the corrosion of color metallographic technique and nitric acid-alcohol also had difference. Only the content of martensite could be quantified or measured for some samples. In order to solve these problems, the microstructure of cold rolled double phase steel with complex morphology was analyzed by SEM, optical microscope and color metallographic corrosion technique. Moreover, the qualitative and quantitative measurements of microstructures were conducted with the assist of several corrosion agents.
|
Received: 20 August 2019
|
|
|
|
[1] |
JIANG Yue-yue, WANG Zhao-dong, DENG Xiang-tao. Effect of trace rare earth Ce on martensitic transformation behavior of ultra-high strength low alloy steel[J]. Iron and Steel, 2020, 55(6): 84-90. |
[2] |
TIAN Ya-qiang1,BI Wen-qiang1,PAN Hong-bo2,LI Hong-bin1,ZHENG Xiao-ping1,CHEN Lian-sheng1. Effect of carbide evolution on Lüders behavior of cold rolled ART 0.1C-7Mn steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(6): 505-511. |
[3] |
SHAO Cheng-wei, WANG Jun-tao, ZHAO Xiao-li, HUI Wei-jun. Microstructure and mechanical properties of intercritically annealed Al-contain medium Mn steel[J]. Iron and Steel, 2020, 55(5): 87-93. |
[4] |
LI Dong-hui, XIAO Mao-guo, SUN Hao, HE Wen-chao, ZHANG Xu, LI Shao-hong. Effects of deep cryogenic treatment on microstructure and thermal stability of H13 steel[J]. Iron and Steel, 2020, 55(2): 95-102. |
[5] |
MA Xiao-cong, AN Zi-jun, CHEN Lei, MEI Rui-xue, HAO Shuo, PENG Cheng. Influence of loading direction on tensile properties of a TRIP-assisted duplex stainless steel sheet[J]. Iron and Steel, 2020, 55(2): 112-118. |
[6] |
YANG Yu-dan,ZHAO Hong-shan,LIU Teng-shi,DONG Han. Microstructure and properties of new high-carbon martensitic stainless steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(2): 135-142. |
|
|
|
|