|
|
|
| Effect of magnesium treatment on inclusions in 30CrNi2MoVA steel |
| LI Yang， CHEN Chang-yong， LIU Cong-ying， SUN Meng， JIANG Zhou-hua |
| School of Metallurgy， Northeastern University， Shenyang 110819， China |
|
|
|
Abstract In order to study the effect of magnesium treatment on inclusions in steel， the aluminum deoxidized 30CrNi2MoVA steel was treated with NiMg alloy. Total three groups of experiments were carried out. The content of magnesium in the steel at the end was less than 0.001%， 0.010% and 0.014%， respectively. The experimental results indicated that magnesium treatment had good effect on deoxidization， desulfurization and dephosphorization. It could effectively make the inclusions in steel disperse and fine， and meanwhile change the type and composition of inclusions. With the increase of magnesium content， the average equivalent diameter of inclusions in steel decreased from [?2.0×10－6 m]to[?1.0×10－6 m，] and the proportion of inclusions with equivalent diameter less than[?1.5×10－6 m]increased from 84.04% to 93.65%. However， when the magnesium content increased to 0.014%， a small amount of large inclusions began to appear in the steel. Combining the experimental results with the thermodynamic calculation and analysis， it could be found that with increasing magnesium content in the steel， the types of inclusions in steel changed from Al2O3 to Al-Mg-O system， MgO and Mg-O-S system. As the magnesium content in steel was further increased， some fine pure MgS and Mg-O-S-P inclusions in the steel were observed.
|
|
Received: 06 May 2020
|
|
|
|
| [1] |
Run-sheng Xu, Shu-liang Deng, Heng Zheng, Wei Wang, Ming-ming Song, Wei Xu, Fang-fang Wang. Influence of initial iron ore particle size on CO2 gasification behavior and strength of ferro-coke[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(8): 875-886. |
| [2] |
HAI Chao， GUO Xiao-jing. Analysis of the cause of the crack of the connecting rod[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(5): 23-. |
| [3] |
LI Si-jun， DU Jin-ke， PENG Yong-xiang， LI Ping， HU Bin. Numerical simulation study on single-point unequilibrium casting for beam blank in Laiwu Iron and Steel Company[J]. CONTINUOUS CASTING, 2020, 45(3): 1-9. |
| [4] |
ZHENG Yuan-shou. High speed production technology of 160 mm× 160 mm continuous casting in Sangang[J]. CONTINUOUS CASTING, 2020, 45(3): 10-13. |
| [5] |
Si‑wei Li, Jian Pan, De‑qing Zhu, Zheng‑qi Guo, Ji‑wei Xu, Jian‑lei Chou. Synthesis, characterization and properties of organic compound bentonite by molecular intercalation process[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(10): 1127-1136. |
| [6] |
Jian‑ming Su, Zhi‑he Dou, Ting‑an Zhang, Yan Liu. Physical simulation of bubble refinement in the bottom blowing process with mechanical agitation[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(10): 1137-1144. |
|
|
|
|
2020, Vol. 38 
