|
|
Application of cooling thermal analysis in study of aluminum alloy materials |
GAN Junqi, PAN Mengyao, WANG Feng, HUANG Meihong, CHEN Shaowei, ZHANG Xiangzhu |
School of Automotive Engineering, Guangdong Polytechnic of Industry and Commerce, Guangzhou 510550, China |
|
|
Abstract A novel approach was introduced, namely computer-aided cooling thermal analysis, for quantitatively assessing the macroscopic features of alloy microstructures. By analyzing the changes in specific characteristic temperatures and parameters derived from the solidification curve, some valuable insights into the influence of alloy composition and melting processes on the microstructure could be obtained, for example, evaluating the modification effect on the eutectic Si phase, assessing the refinement effect of the initial α-Al phase, and determining the type and precipitation stage of intermediate phases. Unlike conventional methods, the proposed computer-aided cooling thermal analysis could provide a macro perspective on alloy microstructure characterization, eliminating the drawbacks associated with random testing areas and subjective interpretations by personnel. Consequently, this method played an indispensable role in the research and development of high-conductivity (thermal)/high-strength aluminum alloys.
|
Received: 18 September 2023
|
|
|
|
[1] |
甘俊旗. Al-Si基铸造铝合金组织调控对导热性能的影响机制研究[D]. 广州:华南理工大学,2021.
|
[2] |
Horikoshi T, Kuroda H, Shimizu M, et al. Development of aluminum alloy conductor with high electrical conductivity and controlled tensile strength and elongation[J]. Hitachi Cable Review,2006,25:18.
|
[3] |
GAN Junqi, HUANG Yujian, WEN Cheng, et al. Effect of Sr modification on microstructure and thermal conductivity of hypoeutectic Al-Si alloys[J]. Transactions of Nonferrous Metals Society of China, 2020,30:2879.
|
[4] |
GAN Junqi, DU Jun, WEN Cheng, et al. The effect of Fe content on the solidification Pathway, microstructure and thermal conductivity of hypoeutectic Al-Si alloys[J]. International Journal of Metalcasting, 2022,16,178.
|
[5] |
GAN Junqi, HUANG Yujian, WEN Cheng, et al. Synchronous improvement in thermal conductivity and ultimate tensile strength of Al-7Si-0.6Fe-0.5Zn cast alloy by B/La/Sr composite modification[J]. Mater Res Express, 2020,7:086501.
|
[6] |
Brandt R, Neuer G.Electrical resistivity and thermal conductivity of pure aluminum and aluminum alloys up to and above the telting temperature[J]. International Journal of Thermophysics, 2007, 28(5):1429.
|
[7] |
甘俊旗,潘梦鹞,王锋,等. 高导热(电)/高强度铸造Al-Si合金的开发及研究进展[J]. 金属功能材料,2022(3): 25.
|
[8] |
甘俊旗,文浩,潘梦鹞,等. 基于正交试验对铸造铝合金电导率和抗拉强度影响规律的分析[J]. 有色金属材料与工程,2022,43(4):7.
|
[9] |
黄斌. 铸铁异常冷却曲线的识别[J]. 铸造,1999(11):25.
|
[10] |
Stuart D McDonald, Kazuhiro Nogita, Arne K Dahle. Eutectic nucleation in Al-Si alloys[J]. Acta Materialia, 2004,52:4273.
|
[11] |
Knuutinen A, Nogita K, McDonald S D, et al.Modification of Al-Si alloys with Ba,Ca,Y and Yb[J].Journal of Light Metals, 2001,1:229.
|
[12] |
吕孟杰. 亚共晶铝硅合金锑变质效果的热分析[D]. 武汉:华中科技大学,2017.
|
[13] |
Malekan M, Shabestari S G. Computer-aided cooling curve thermal analysis used to predict the quality of aluminum alloys[J]. Journal of Thermal Analysis and Calorimetry, 2011,103(2):453.
|
[14] |
Shabestari S G, Malekan M. Thermal analysis study of the effect of the cooling rate on the microstructure and solidification parameters of 319 aluminum alloy[J]. Canadian Metallurgical Quarterly, 2005,44(3):305.
|
[15] |
Emadi D, Whiting L V, Nafisi S, et al. Applications of thermal analysis in quality control of solidification processes[J]. Journal of Thermal Analysis and Calorimetry, 2005,81(1):235.
|
[16] |
石裕同. Mn对碳质孕育Mg-3Al合金组织与熔体凝固特性的影响[D]. 广州:华南理工大学,2017.
|
[17] |
GAN Junqi, PAN Mengyao, HUANG Meihong, et al. Effect of Ce addition on the thermal conductivity and mechanical properties of Al-7Si-0.6Fe-0.5Zn cast alloy treated by B/La/Sr modification[J]. International Journal of Metalcasting, 2023,17: 874.
|
|
|
|