• Overview of Chinese core journals
  • Chinese Science Citation Database(CSCD)
  • Chinese Scientific and Technological Paper and Citation Database (CSTPCD)
  • China National Knowledge Infrastructure(CNKI)
  • Chinese Science Abstracts Database(CSAD)
  • JST China
  • SCOPUS
Advanced Search
Articles in press have been peer-reviewed and accepted, which are not yet assigned to volumes /issues, but are citable by Digital Object Identifier (DOI).
Category
Review on intelligent recognition of blast furnace gas flow distribution through multimodal data fusion
HE Zhijun, WEN Shanshan, ZHANG Mengke, ZHANG Junhong, ZHAN Wenlong, GAO Lihua
2026, 61(2): 1-18. DOI: 10.13228/j.boyuan.issn0449-749x.20250456
Abstract
Research progress on environmental impacts of iron tailings and prevention strategies
YANG Aimin, BAI Yunjie, LIU Weixing, WU Mingyu, LÜ Jian
2026, 61(2): 19-32,55. DOI: 10.13228/j.boyuan.issn0449-749x.20250492
Abstract
Research progress on formation mechanism of reversed austenite in maraging steels and its influence on properties
GAO Qiuzhi, LU Yuhan, MA Qingshuang, PEI Chenghao, YAN Han, LI Huijun, BAI Jing
2026, 61(2): 33-55. DOI: 10.13228/j.boyuan.issn0449-749x.20250578
Abstract
Effect of key process parameters on properties and graphitization degree of iron coke
ZHANG Shuhui, ZHANG Jingyi, WU Xiaozhang, LIU Ran, LAN Chenchen, WU Shuoxuan
2026, 61(2): 56-69. DOI: 10.13228/j.boyuan.issn0449-749x.20250431
Abstract
Effect of pellet reduction swelling on burden movement in shaft furnace by DEM simulation
ZHONG Yu, ZHENG Jun, LUO Dongcai, YOU Yang, YANG Lin, NI Jun, XU Jian, LÜ Xuewei
2026, 61(2): 70-77,99. DOI: 10.13228/j.boyuan.issn0449-749x.20250422
Abstract
Developing composite binders and optimizing fabrication process for cold-bonded pellets
CHEN Nengge, ZHOU Jianghong, LIU Wensheng, WANG Hui, LONG Hongming, WANG Yifan
2026, 61(2): 78-88,111. DOI: 10.13228/j.boyuan.issn0449-749x.20250441
Abstract
Fractional-order heat transfer characteristics and prediction of blast furnace cooling staves
ZHANG Qunwei, XING Hongwei, LIANG Qiqi, YANG Aimin, LI Jie, HAN Yang
2026, 61(2): 89-99. DOI: 10.13228/j.boyuan.issn0449-749x.20250455
Abstract
Effectiveness evaluation model of oxide metallurgy for non-metallic inclusions in steel
YUAN Xinghu, WANG Guocheng, CAO Lei, MENG Jinsong
2026, 61(2): 100-111. DOI: 10.13228/j.boyuan.issn0449-749x.20250504
Abstract
Industrial investigation and application on process of Ca increase by ferrosilicon alloy in CAS refining process
WEN Han, ZHOU Haichen, JIA Liubing, LUO Yanzhao, HUANG Caide, ZHAO Changliang
2026, 61(2): 112-122. DOI: 10.13228/j.boyuan.issn0449-749x.20250599
Abstract
Research status and future prospects of CO2 application mechanisms in steelmaking-continuous casting
ZHANG Yanchao, YANG Yaoqi, GUO Zhaofeng, LI Chenxiao, ZHANG Caijun, LÜ Xiaofang
2026, 61(2): 123-139. DOI: 10.13228/j.boyuan.issn0449-749x.20250589
Abstract
Model on coupling of roll wear-fatigue and equivalent conversion of rolling kilometers
WANG Wenqi, CUI Xiaohui, ZHANG Jiantao, LIU Lulu, BAI Zhenhua
2026, 61(2): 140-149. DOI: 10.13228/j.boyuan.issn0449-749x.20250483
Abstract
Effect of tempering temperature on microstructure and properties of Ti-Mo-V microalloyed steel
FU Zhixiang, YANG Gengwei, HAN Ruyang, XU Yaowen, XU Deming, YANG Tingkai
2026, 61(2): 150-159. DOI: 10.13228/j.boyuan.issn0449-749x.20250609
Abstract
Effects of V-N microalloying on microstructure and properties of high-strength shipbuilding steel
FENG Zhiqiang, LI Boyong, ZHANG Dazheng, YAN Ling, XU Tingfeng
2026, 61(2): 160-171. DOI: 10.13228/j.boyuan.issn0449-749x.20250526
Abstract
Low-temperature impact fracture failure mechanism of Q490DRL2 pressure vessel steel plate
SUN Haoyuan, QU Wei, SUN Weihua, REN Huiping, LIU Peng, LI Guobao, SHI Chengbin, KONG Ya
2026, 61(2): 172-183. DOI: 10.13228/j.boyuan.issn0449-749x.20250510
Abstract
Effect of heat input on microstructure and properties of coarse-grain heat affected zone in duplex stainless steel
ZHAO Lidong, ZANG Ximin, WANG Dihe, PANG Qihang, LI Weijuan, XU Mei
2026, 61(2): 184-194. DOI: 10.13228/j.boyuan.issn0449-749x.20250564
Abstract
Comparison of microstructure and corrosion behavior among Zn-0. 2%Al, Zn-6%Al-3%Mg, and Zn-19%Al-6%Mg
LI Zhao, LI Yuanpeng, JIANG Sheming, ZHANG Jie, QIAO Degao
2026, 61(2): 195-204. DOI: 10.13228/j.boyuan.issn0449-749x.20250565
Abstract
Formation of intragranular ferrite in weld heat-affected zone and its influence on microstructure
CAO Shengli, ZHANG Caijun, ZHANG Qingjun, WU Shujing, LI Kuo
2026, 61(2): 205-215,230. DOI: 10.13228/j.boyuan.issn0449-749x.20250500
Abstract
Investigation of primary phases in Ce-containing heat-resistant steel electroslag remelting ingots
RAN Gang, YAN Qingzhi, ZHANG Xiaoxin
2026, 61(2): 216-230. DOI: 10.13228/j.boyuan.issn0449-749x.20250487
Abstract
Carbon footprint analysis and carbon reduction path research of automotive hot-dip galvanized sheet
WANG Qian, LIANG Chuanzhi, WEI Guangsheng, XIE Rongyuan, LI Menglong
2026, 61(2): 231-245. DOI: 10.13228/j.boyuan.issn0449-749x.20250468
Abstract
Difference of Ca extraction characteristics of steel slag in various acidic solutions
MEI Xiaohui, XU Taixu, ZHAO Qing, SUN Ye, HUANG Yan, LIU Chengjun
2026, 61(2): 246-256. DOI: 10.13228/j.boyuan.issn0449-749x.20250453
Abstract

Total visits    

Today's visit