The strip temperature is affected by many factors in rapid cooling section (RCS) of the vertical continuous annealing furnace (VCAF). They can be divided into four types: the physical properties of cooling gas, the geometry characteristics of configuration of cooling equipment, the heat transfer between the strip and the cooling gas, and the conductivity of the strip. It aims to model the strip temperature in the cooling section based on the fundamental heat transfer theory and the four aspects factors. The model for transient Nusselt number is obtained by considering Reynolds number, Prandtl number and geometry characteristics of RCS. Then cooling model of the strip transient temperature is built by Nusselt number, heat transfer coefficient and heat conductivity of the strip. The results are compared with the data from production line. The comparisons indicate that the model can well predict cooling temperature of the strip. It is hoped that the proposed model can be used for design and control of the vertical continuous annealing furnace.
Key words
rapid cooling /
jet impinging convection /
heat transfer coefficient
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
XIANG Shun-Hua, LIU Hua-Fei etc. Cooling Speed of Strip Jet Impinging by H2 [J]. 2005 CSM Annual Meeting proceedings. 421-425.
WANG Yongping, Bao Ji, Gao Li. Development and Actualities on Cooling Technologies for continuous Annealing Furnace[J]. Industrial Furnace.Vol.24, Iss.1, 2002, 21-24.
Zhu Guangjun, Sun Yaqin. Transport Principal [M]. Beijing, Metallurgy Industry Press, 2009, First Edition (in Chinese).
Incropera F. P., Dewitt D. P., Bergman T. L., Lavine A. S. Fundamentals of Heat and Mass Transfer [M]. Beijing, Chemistry Industry Press, 2009, First Edition (in Chinese).
Yunus. CENGEL HEAT TRANSFER [M].
Abdlmonem H Beitelmal, Michel A Saad. Effcts of Surface Roughness on the Average Heat Transfer of an Impinging Air Jet[J]. International Communication in Heat Mass Transfer, 2000, 27(1):1~12
Lee Jungho, Lee SangJoog. The effect of Nozzle Aspect Ratio on Stagnation Region Heat Transfer Characteristics of Elliptic impinging Jet [J]. Int. J. Heat Mass Transfer.2000.43.555.575
Wang Houhua, Zhou Genming, Ji Xinyu, Liao Gaungya. Fundamentals of Heat Transfer [M]. Chongqing, Chongqing University Press, 2006, First Edition (in Chinese).
JIA Lidi, Li Feng. Process Analysis for Heat Transfer in Rapid Cooling Section of Vertical Continuous Annealing Furnace on Hot Dip Galvanizing [J]. Energy for Metallurgical Industry.Vol.26,Iss.3,5,2007,34-36
XU Jinglei, Xu Zhong, Xiao Min, Huang Shujuan. Summery for Analyzing jet impinging [J]. Mechanics in Engineering.Vol.21, 2007, 8~16.
{{custom_fnGroup.title_en}}
Footnotes
{{custom_fn.content}}
Funding
sponsored by National Science and Technology Support Program for 12th Five-Year Plan of China
{{custom_fund}}
PDF(555 KB)
({{custom_author.role_en}}), {{javascript:window.custom_author_en_index++;}}
