[1] S.C. Pan, M.N. Huang, G.-Y. Tzou.. Analysis of asymmetrical cold and hot bond rolling of unbounded clad sheet under constant shear friction　[J].Journal of Materials Processing Technology, 2006, 177:114-120 [2]WANG Lixin，LI Guoping.Interface structure，performance analysis and application of exploded stainless and carbon steel clad plates[J].Iron and Steel, 2005, 40(11):71-74 [3]XIE Guang-ming, LUO Zong-an, WANG Guang-lei, et al.Microstructure and properties of stainless steel clad plate by vacuum rolling cladding[J].Journal of Northeastern University: Natural Science, 2011, 32(10):1398-1401 [4] Xiaobing Li, Guoyin Zu, Mingming Ding, Yongliang Mu, Ping Wang.Interfacial microstructure and mechanical properties of Cu/Al clad sheet fabricated by asymmetrical roll bonding and annealing [J].Materials Science and Engineering A, 2011, 529:485-491 [5] Kwang Seok Lee, Dong Hyun Yoon, Hye Kyoung Kim, Yong-Nam Kwon, Young-Seon Lee.Effect of annealing on the interface microstructure and mechanical properties of a STS-Al-Mg 3-ply clad sheet [J].Materials Science and Engineering A, 2012, 556:319-330 [6] Henryk Paul, Lidia Litynska-Dobrzynska, Mariusz Prazmowski.Microstructure and phase constitution near the interface of explosively welded Aluminum/Copper plates [J].Metallurgical and Materials Transactions A, 2013, 44A:3836-3850 [7] K.S. Lee, J.S. Kim, Y.M. Jo, S.E. Lee, J. Heo, Y.W. Chang, Y.S. Lee.Interface-correlated deformation behavior of a stainless steel-Al-Mg 3-ply composite [J].Materials Characterization, 2013, 75:138-149 [8]N.Venkateswara Rao,DS. Sarma,S. Nagarjuna,et al. Influence of hot rolling and heat treatment on structure and properties of HSLA steel explosively clad with austenitic stainless steel[J].Materials Science and Technology, 2009, 25(11):1387-1396 [9]Masuda Sadakazu, nakauchi Ichiro, Tagane Akira, et al.Rolling characteristics of cladding plates in hot roll bonding Process[J][J].Transactions of the Iron and Steel Institute of Japan, 1988, 28(6):470-477 [10]Wang Guanglei, Luo Zongan, Xie Guangming, et al.Effect of heating temperature on the bonding property of the titaniumstainless steel plate by hot-rolling bonding [J][J].Rare Metal Materials and Engineering, 2013, 42(2):387-391 [11] T.Kawano, Y.Inoue, M.Matsui, et al.Properties of aluminium alloy/stainless steel clad material produced via vacuum roll bonding [J].Welding in the World, 1998, 41:88-96 [12]Zu Guo-yin, Li Hong-bin, Li Bing, et al.Effect of high frequency current heating online process on microstructures and mechanical property of stainless steelcarbon steel cladding strip [J][J].Acta Metallurgica Sinica, 2007, 43(10):1048-1052 [13] T.Kannan, N. Murugan.Effect of flux cored arc welding process parameters on duplex stainless steel clad quality [J].Journal of Materials Processing Technology, 2006, 176:230-239 [14]Missori S.Murdolo F,Sili A..Single-pass laser beam welding of clad steel plate[J].Welding Journal, 2004, 83(2):65-71 [15]Yan J.C.,Zhao DS.,Wang C.W.,et al.C.,Zhao DS.,Wang C.W.,et al. Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer[J].Materials Science and Technology, 2009, 25(7):914-918 [16]Zhao D.S.,Yan JC.,Wang Y.,et al. Relative slipping of interface of titanium alloy to stainless steel during vacuum hot roll bonding[J].Materials Science and Engineering A, 2009, 499(1-2):282-286 [17]Chen Jing, Tong Jian-guo, Ren Xue-ping.Bonding behavior of 25Cr5MoA Q235 hot rolled clad plates [J][J].Journal of University of Science and Technology Beijing, 2007, 29(10):985-988 [18] Peng X K, Wuhrer R, Heness G.Rolling strain effects on the interlaminar properties of roll bonded copper/aluminum metal laminates [J].Journal of Materials Science, 2000, 35:4357-4363 [19] G.F. Li, E.A. Charles, J. Congleton.Effect of post weld heat treatment on stress corrosion cracking of low alloy steel to stainless steel transition weld [J].Corrosion Science, 2001, 43:1963-1983