Thermodynamic study on precipitation of TiN and TiC in continuous casting of titanium microalloyed steel

WU Shi-xin,,CHEN Deng-fu,,WANG Qin-zheng,,JIN Xing,Tao Liu,,LONG Mu-jun,, DUAN Hua-mei,

Continuous Casting ›› 2019, Vol. 38 ›› Issue (1) : 28-34.

Welcome to visit Continuous Casting, July 27, 2025
Continuous Casting ›› 2019, Vol. 38 ›› Issue (1) : 28-34. DOI: 10.13228/j.boyuan.issn1005-4006.20180070
strand quality

Thermodynamic study on precipitation of TiN and TiC in continuous casting of titanium microalloyed steel

Author information +
History +

Abstract

The precipitation of inclusions in continuous casting process has an important effect on the microstructure and properties of billets. In order to study the Precipitation Law of TiN and TiC inclusions in Ti microalloyed Q345 steel, the thermodynamics of TiN and TiC formation was calculated. The solid/liquid temperature, the precipitation temperature of carbonitride, the equilibrium/actual solubility product of TiN and TiC at different temperatures and the initial concentration of Ti and N required for precipitation were calculated. Precipitation of TiN and TiC during the solidification process of high titanium steel. The results show that TiN and TiC can not precipitate above the liquidus temperature, TiN and C begin to precipitate when fs>0.56 in the two-phase region and TiC begin to precipitate when fs>0.92 in the two-phase region because of the enrichment of Ti, N and C at the solidification front, and TiN particles precipitate in the solid austenite, while TiC precipitates at a lower temperature than TiN in the ferrite.

Key words

Titanium microalloyed stee / TiC / TiN / Thermodynamics

Cite this article

Download Citations
WU Shi-Xin, CHEN De-Fu, WANG Qi-Zheng, et al. Thermodynamic study on precipitation of TiN and TiC in continuous casting of titanium microalloyed steel[J]. Continuous Casting, 2019, 38(1): 28-34 https://doi.org/10.13228/j.boyuan.issn1005-4006.20180070

References

[1]周家林,赖春明,潘成刚,皮昕宇,胡唐国.钛微合金化Q345R容器板的强化机理[J].钢铁钒钛,2014,35(01):54-58.
[2]史伟,赵江涛,孙彦百,周庆宪,敬钊.钛微合金化对Q345D钢冲击韧性影响的探讨[J].热处理技术与装备,2014,35(03):31-34.
[3]葛允宗, 王建军, 颜慧成,仇圣桃. 含Ti齿轮钢中TiN夹杂析出热力学及其控制[J]. 钢铁钒钛. (05), 50 (2012).
[4]黄希祜. 钢铁冶金原理[M]. 北京:冶金工业出版社, 2005).
[5]格里古良. 炼钢过程的物理化学计算[M]. 北京:冶金工业出版社, 1993).
[6]赵东伟, 包燕平, 王敏, 马文俊 , 苏利川. GCr15轴承钢中TiN(C)析出行为热力学分析和研究[J]. 特殊钢. (05), 7 (2012).
[7]P.F.B. Irvine K J, Gladman T.Grain Refined C-Mn Steel JISI. 205, 161 (1967).
[8]赵素, 张立, 徐国栋,李金富. Nb-Ti微合金钢中第二相析出的热力学计算[J]. 宝钢技术.(02),19(2012).
[9]雍岐龙, 刘正东, 孙新军, 曹建春, 赵昆渝, 张永 and 查小琴. 钛微合金钢中碳氮化钛固溶量及化学组成的计算与分析. 钢铁钒钛[J].(03), 12 (2005).
[10]杨颖, 侯华兴, 史乃安,李向科. 高钛低碳钢中Nb、Ti的析出行为[J]. 热加工工艺.(02),40(2010)

14

Accesses

0

Citation

Detail

Sections
Recommended

/