Research on cleanliness of HRB400E steel treated with rare earth

KANG Jian, YU Yan-chong, MENG Xiao-liang, WANG She-bin

Continuous Casting ›› 2020, Vol. 39 ›› Issue (3) : 38-42.

PDF(1051 KB)
Welcome to visit Continuous Casting, July 28, 2025
PDF(1051 KB)
Continuous Casting ›› 2020, Vol. 39 ›› Issue (3) : 38-42. DOI: 10.13228/j.boyuan.issn1005-4006.20200010
Strand Quality

Research on cleanliness of HRB400E steel treated with rare earth

Author information +
History +

Abstract

In order to study the effect of rare earth (RE) on the composition and morphology of inclusions in HRB400E steel, the possible inclusions in the treated steel were calculated by thermodynamics, and the inclusions in HRB400E steel before and after rare earth treatment were characterized and analyzed by SEM and EDS. The result showed that Rare earth can be added in the smelting process of screw steel and the amount of added rare earth can reach 0.003 2%; the rare earth can purify the molten steel and reduce the S content of the steel from 0.018% to 0.004% by 77.78%; When the content of rare earth is 0.003 2%, the results of the thermodynamic show that order of the possible inclusion formation in the steel is REAlO3>RE2O2S>Al2O3. The rare earth element plays a certain role in the modification of sulfur and oxygen inclusions. The inclusions are modified into RE2O2S and REAlO3,the combination of rare earth elements and S reduces the precipitation of MnS inclusions in steel, which improves the properties of the steel.

Key words

rare earth / HRB400E / thermodynamics / inclusion

Cite this article

Download Citations
KANG Jian, YU Yan-chong, MENG Xiao-liang, et al. Research on cleanliness of HRB400E steel treated with rare earth[J]. Continuous Casting, 2020, 39(3): 38-42 https://doi.org/10.13228/j.boyuan.issn1005-4006.20200010

References

[1] 袁威, 鲁雄刚, 郭曙强, 等. 20MnSi螺纹钢夹杂物产生的原因[J].上海大学学报:自然科学版, 2004 (5) :471.
[2] 刘金源, 钟寿军.屈服强度偏低原因分析江西冶金期[J].江西冶金, 2016, 36(1):18.
[3] 韩北方,王开,常瑜. 螺纹钢HRB400E屈服强度不合格的原因分析[J].山西冶金, 2018, 41(2):25.
[4] 赵建辉,张炯明,尹延斌,等.板坯夹杂物研究[J].连铸, 2019,44(5):35.
[5] 陈希颖. 中国稀土在钢中的应用中国稀土学报[J].中国稀土学报, 1991, 9(4):354.
[6] 王龙妹, 杜挺, 卢先利, 等.微量稀土元素在钢中的作用机理及应用研究稀土[J].稀土, 2001, 22(4):37.
[7] 董方, 崔志峰, 沈国慧, 等.铈对特种防护钢板组织和力学性能的影响[J].中国稀土学报, 2016, 34(3):320.
[8] 兰杰, 贺俊杰, 丁文江,等. 变质CH13钢中Ce2O3异质核心作用的研究[J]. 中国稀土学报, 2001, 19(2):142.
[9] DENG X.Mechanisms of inclusion evolution and intra-granular acicular ferrite formation in steels containing rare earth elements[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(3):241.
[10] Sun Kuk Kwon, Jun Seok Park, Joo Hyun Park.Influence of refractory-steel interfacial reaction on the formation behavior of inclusions in Ce-containing stainless steel[J]. ISIJ, 2015, 55(12):2589.
[11] LI Y, LIU C, ZHANG T, et al.Inclusions modification in heat resistant steel containing rare earth elements[J]. Ironmaking and Steelmaking, 2016, 42(1):76.
[12] LI X, JIANG Zhou-hua, GENG Xin.Evolution mechanism of inclusions in H13 steel with rare earth magnesium alloy addition[J]. ISIJ International, 2019, 59(9):1152.
[13] 杨全海, 杨吉春, 丁海峰, 等.稀土管线钢中夹杂物热力学分析及实验研究[J].稀土, 2018, 39(2):96.
[14] 付邦豪, 陈超, 成国光, 等.不锈钢冶炼过程的夹杂物[J].钢铁,2012,47(1):40.
[15] 夏金魁, 李相付, 曹龙琼, 等.连铸板坯内部裂纹控制连铸[J].连铸, 2016, 41(3):66.
[16] 李殿明. 高品质钢浇铸过程夹杂物的预测分析[J].连铸, 2016, 41(1):73.
[17] 刘纲,干勇, 刘崇,等.低铝脱氧不锈钢夹杂物演变规律分析[J].连铸,2019,44(6):22.
[18] 刘延强, 张鹏, 何文远, 等.管线钢全流程夹杂物转变规律及控制[J].钢铁, 2018, 53(12):50.
[19] 王昕, 尹树春, 贺磊, 等. 0.05C-0.3Si-2.0Mn-xCe系钢液的洁净度与夹杂物变性行为[J]. 材料工程,2013,41(3):42.
PDF(1051 KB)

19

Accesses

0

Citation

Detail

Sections
Recommended

/