Technical Study and Application of Split Roller Cooling Water Sealing of Caster in Shouqin

LI Song-shan,DUAN Xue-liang,FAN Xing-chen,LI Xue-rong,SUN Bo

Continuous Casting ›› 2013, Vol. 32 ›› Issue (3) : 35-39.

Welcome to visit Continuous Casting, July 30, 2025
Continuous Casting ›› 2013, Vol. 32 ›› Issue (3) : 35-39.
Continuous Casting Equipment

Technical Study and Application of Split Roller Cooling Water Sealing of Caster in Shouqin

Author information +
History +

Abstract

Leaking between the three split rollers of caster segment for the non-entire shaft roller has a serious influence on the surface quality of the slab and the costs of segment maintenance. In this study, the characteristics and reasons of leakage points section of the roller were analyzed, and the key point was obtained which is that how to ensure the synchronization of three split rollers and nonrigid connection between rollers. According to the analysis, the slider with a cross shaft coupling was confirmed. Practice proved that the scheme can perfect the solution of the three split rollers leaking problem, and greatly prolong the roller life, and improve the surface quality of slab.

Key words

split roller / water connector / surface quality / roller leakage

Cite this article

Download Citations
LI Song-Shan. Technical Study and Application of Split Roller Cooling Water Sealing of Caster in Shouqin[J]. Continuous Casting, 2013, 32(3): 35-39

References

[1] 尹冠生 . 理论力学 [M]. 西安: 西北工业大学出版社,2004.
[2]朱仕明 . 动力学 [M]. 武汉:华中科技大学出版社,2000.

14

Accesses

0

Citation

Detail

Sections
Recommended

/