一例进口含铜物料固体废物属性鉴别探讨

查燕青, 潘生林, 蒋一昕, 张秀, 封亚辉, 李海敏

物理测试 ›› 2024, Vol. 42 ›› Issue (1) : 58-62.

PDF(3396 KB)
PDF(3396 KB)
物理测试 ›› 2024, Vol. 42 ›› Issue (1) : 58-62. DOI: 10.13228/j.boyuan.issn1001-0777.20230044
专题研讨

一例进口含铜物料固体废物属性鉴别探讨

  • 查燕青1, 潘生林1, 蒋一昕1, 张秀2, 封亚辉1, 李海敏2
作者信息 +

Discussion on attribute identification of one case of imported copper-containing solid waste

  • 查燕青1, 潘生林1, 蒋一昕1, 张秀2, 封亚辉1, 李海敏2
Author information +
文章历史 +

摘要

近年来,以铜精矿名义走私进口含铜废料的情况时有发生。传统的检测方法对于鉴别此类物料有一定的局限性。基于X射线衍射光谱(XRD)、X射线荧光光谱(XRF)、超景深显微镜以及扫描电镜等技术,针对一批申报品名为“铜精矿”的物料进行固体废物属性鉴别,从而确定样品来源,为海关监管和资源利用提供了科学依据。

Abstract

In recent years, there have been some cases of smuggling imported copper-containing waste using the name of copper concentrate. The traditional detection methods have certain limitations in the identification of such materials. In this paper, the attribute identification of one batch of imported copper-containing solid waste using the declared name of copper concentrate was studied by means of X-ray diffraction spectroscopy (XRD), X-ray fluorescence spectrometry (XRF), ultra depth of field microscopy, and scanning electron microscopy. The source of the samples was determined, which provided a scientific basis for the customs supervision and resource utilization.

关键词

含铜物料 / 铜精矿 / 属性表征 / 固体废物

Key words

copper-containing material / copper concentrate / attribute characterization / solid waste

图表

引用本文

导出引用
查燕青, 潘生林, 蒋一昕, . 一例进口含铜物料固体废物属性鉴别探讨[J]. 物理测试, 2024, 42(1): 58-62 https://doi.org/10.13228/j.boyuan.issn1001-0777.20230044
ZHA Yanqing, PAN Shenglin, JIANG Yixin, et al. Discussion on attribute identification of one case of imported copper-containing solid waste[J]. Physics Examination and Testing, 2024, 42(1): 58-62 https://doi.org/10.13228/j.boyuan.issn1001-0777.20230044

参考文献

[1] 邱定蕃,徐传华. 有色金属资源循环利用[M]. 北京:冶金工业出版社,2006.
[2] 吕新明,田延河,宁海龙,等. 波长色散X射线荧光光谱仪和多晶X射线衍射仪联用技术鉴定进口铜矿和含铜物料[J]. 中国无机分析化学,2018,8(4):21.
[3] 詹美艳,李春明. 电子背散射衍射的制样方法和影响花样质量的因素[J]. 物理测试,2021,39(1):31.
[4] 张晓敏,秦鹤勇,于萍,等. 一种新型镍基高温合金组织及性能的研究[J]. 物理测试,2022,40(4):18.
[5] 周凯,高红,岳波,等. 典型进口废铜废铝初级加工原料模拟熔炼烟气中重金属产生特性研究[J]. 环境科学研究,2021,34(6):1482.
[6] 金鑫炎,毕文珍,王利,等. 晶粒特征在汽车板表面缺陷分析中的应用[J]. 物理测试,2022,40(3):35.
[7] 张书敏,万明轩,蔡丹,等. 石墨消解-ICP-MS法同时测定铜精矿中4种有害元素[J].中国无机分析化学,2021,11(6):17.
[8] 中华人民共和国国家质量监督检验检疫局,中国国家标准化管理委员会. GB/T 27682—2011 铜渣精矿[S]. 北京:中国标准出版社,2011.
[9] 付强,于力,汤集刚,等. 进口铜精矿属性鉴别过程中的思考[J].中国无机分析化学,2021,11(6):96.
[10] 洪秋阳,李波,朱志秀,等. 工艺矿物学研究用于进口铜精矿的鉴别[J]. 冶金分析,2023,43(2):8.
[11] 许并社,李明照. 铜冶炼工艺[M]. 北京:化学工业出版社,2010.
[12] 朱茂兰,熊家春,胡志彪,等. 铜渣中铜铁资源利用研究进展[J]. 有色冶金设计与研究,2016,37(2):15.

基金

海关总署科研项目(2021HK225)

PDF(3396 KB)

21

Accesses

0

Citation

Detail

段落导航
相关文章

/