• Overview of Chinese core journals
  • Chinese Science Citation Database(CSCD)
  • Chinese Scientific and Technological Paper and Citation Database (CSTPCD)
  • China National Knowledge Infrastructure(CNKI)
  • Chinese Science Abstracts Database(CSAD)
  • JST China
  • SCOPUS
Advanced Search
Articles in press have been peer-reviewed and accepted, which are not yet assigned to volumes /issues, but are citable by Digital Object Identifier (DOI).
Category
Research progress on erosion mechanism and burn-through early warning technology of converter lining
MENG Qinghui, LI Zhixin, XIN Tongze, GUO Yixiong, ZHANG Yanlong, GE Yutian, WANG Min
2026, 38(9): 1307-1319. DOI: 10.13228/j.boyuan.issn1001-0963.20260065
Abstract
Technical research on low-temperature and low-carbon preparation of iron-bearing burdens from typical iron concentrates
JI Zhiyun, LÜ Jiaming, LI Shaochun, DU Yanqing, FAN Xiaohui, YU Ying, WANG Xiaolong, GAN Min
2026, 38(9): 1320-1328. DOI: 10.13228/j.boyuan.issn1001-0963.20250311
Abstract
Numerical analysis of gas-solid heat transfer process inside two-stage cooling device for sinter
FENG Junsheng, JIAO Yuming, ZHAO Liang, DONG Hui
2026, 38(9): 1329-1339. DOI: 10.13228/j.boyuan.issn1001-0963.20250267
Abstract
Structural characterization and property evolution of sinter during transfer
WEI Qingyang, HE Fei, TENG Yu, XIAO Zubin, QU Changle, XIAO Kai, WANG Yaozu, WANG Yutong
2026, 38(9): 1340-1347. DOI: 10.13228/j.boyuan.issn1001-0963.20250329
Abstract
Numerical simulation study on bubble behavior during bottom blowing argon for 120 t ladle
LIU Dehua, SHAO Pin
2026, 38(9): 1348-1358. DOI: 10.13228/j.boyuan.issn1001-0963.20250304
Abstract
Prediction of end-point carbon content in RH refining based on RFE-SVR
HE Yibo, SONG Dazhou, LI Yihong, XUE Xilin, HUA Chengjian
2026, 38(9): 1359-1367. DOI: 10.13228/j.boyuan.issn1001-0963.20250296
Abstract
Transformation behavior of calcium-modified inclusions in 304 stainless steel during solidification
HUANG Lei, LING Rui, WANG Shimeng, WANG Yong, LIU Chengsong, ZHANG Hua, NI Hongwei
2026, 38(9): 1368-1381. DOI: 10.13228/j.boyuan.issn1001-0963.20250356
Abstract
Influences of long nozzle pouring position on tundish service life and molten steel quality
PENG Zun, HU Xin, LI Yihong, HUA Chengjian
2026, 38(9): 1382-1396. DOI: 10.13228/j.boyuan.issn1001-0963.20250330
Abstract
Plasticity-limiting factors and mechanisms in strip-cast low-carbon steel
FENG Qingxiao, WANG Yuqi, LI Hualong, GUO Tianyang, YANG Zhu, LIANG Xiao
2026, 38(9): 1397-1405. DOI: 10.13228/j.boyuan.issn1001-0963.20260157
Abstract
Effect of cold rolling reduction on superplastic microstructure and mechanical properties of Fe-35Mn-8Al-0.3C low-density steel
LIU Yang, ZHANG Jing, KANG Qingfeng, WANG Cunyu, XU Haifeng, ZHANG Xiaofeng, CAO Wenquan
2026, 38(9): 1406-1417. DOI: 10.13228/j.boyuan.issn1001-0963.20260008
Abstract
Effect of intercritical annealing temperature on microstructure and properties of medium Mn steel
YAN Xiao, XIE Jiaxuan, WANG Zichun, YAN Bowei, ZHANG Peng
2026, 38(9): 1418-1428. DOI: 10.13228/j.boyuan.issn1001-0963.20260017
Abstract
Influence mechanism of trace chromium on microstructure and properties of 16MnNiV small-diameter seamless steel pipes
JIANG Chunhui, DENG Xinji, LI Zhaodong, CAO Yanguang, LI Yuan, WEI Wei
2026, 38(9): 1429-1442. DOI: 10.13228/j.boyuan.issn1001-0963.20250345
Abstract
Effect of stress relief annealing on microstructure and corrosion behavior ofselective laser melted TC4 titanium alloy
ZHOU Huiling, HAN Yuyang, LI Jingyong, QIAO Yanxin, LU Sheng
2026, 38(9): 1443-1452. DOI: 10.13228/j.boyuan.issn1001-0963.20260014
Abstract

Total visits    

Today's visit