• Overview of Chinese core journals
  • Chinese Science Citation Database(CSCD)
  • Chinese Scientific and Technological Paper and Citation Database (CSTPCD)
  • China National Knowledge Infrastructure(CNKI)
  • Chinese Science Abstracts Database(CSAD)
  • JST China
  • SCOPUS
Advanced Search
Articles in press have been peer-reviewed and accepted, which are not yet assigned to volumes /issues, but are citable by Digital Object Identifier (DOI).
Category
Intelligent rolling technologies and applications based on deep integration of industrial mechanism and AI
HE Anrui, SONG Yong
2026, 43(4): 1-7. DOI: 10.13228/j.boyuan.issn1003-9996.20260401
Abstract
Flatness prediction of plate and strip straightening based on GA-CNN model
HUANG Lixin, LIU Yujia, WANG Guoqing, YE Shimin, LI Jiadong
2026, 43(4): 8-15. DOI: 10.13228/j.boyuan.issn1003-9996.20260402
Abstract
Machine learning-based prediction of mechanical properties and optimization of controlled cooling process for steel pipes
LI Zhitao, HAN Huiquan, FENG Zhaohui, DAI Qingwei
2026, 43(4): 16-24. DOI: 10.13228/j.boyuan.issn1003-9996.20260403
Abstract
Position tracking and determination method for skid marks in the finishing mill unit of hot strip continuous rolling
ZHOU Zhongxun, ZHAI Lanyan, YANG Yixuan, GUO Qiang, ZHANG Fei
2026, 43(4): 25-33. DOI: 10.13228/j.boyuan.issn1003-9996.20260404
Abstract
Construction and research progress of hydrogen energy transportation pipeline
YANG Bowei, LI Xinling, ZHANG Kun, YAO Zhen, LIU Wenyue, WANG Yong
2026, 43(4): 34-45. DOI: 10.13228/j.boyuan.issn1003-9996.20260405
Abstract
Effect of annealing process on microstructure and properties of ultra-high strength automotive steel
DONG Ruifeng, ZHAO Junhui, WANG Yanru, WAN Zhiyuan, LI Yanshan, HUANG Jiao
2026, 43(4): 46-54. DOI: 10.13228/j.boyuan.issn1003-9996.20260406
Abstract
Effect of solution treatment on the microstructure and properties of Fe-15Mn-8Al-0.25C lightweight steel
WANG Chong, ZHAO Lidong, PANG Qihang, LI Weijuan, WANG Dihe, SHI Jinming
2026, 43(4): 55-60. DOI: 10.13228/j.boyuan.issn1003-9996.20260407
Abstract
Experimental and simulation study of stress evolution in Q1100 plate quenching process
WANG Wenyu, DING Wenhong, LU Xiaoxuan, YANG Yan, WANG Wenguang, YUAN Qiaojun
2026, 43(4): 61-68. DOI: 10.13228/j.boyuan.issn1003-9996.20260408
Abstract
Effects of Cu element on the microstructure and properties of a high-Mn cryogenic steel
JIANG Wei, CHEN Yong
2026, 43(4): 69-73. DOI: 10.13228/j.boyuan.issn1003-9996.20260409
Abstract
Growth behavior of austenite grains in petroleum casing steel
GENG Wenshou, WANG Yunkai, MA Jiawei, RUAN Yingjie, LIU Dongsheng, KANG Jian
2026, 43(4): 74-81. DOI: 10.13228/j.boyuan.issn1003-9996.20260410
Abstract
Investigation on hydrogen-induced cracks of Q500 steel under different strain rates
PAN Yue, LI Weijuan, ZHANG Dazheng, PANG Qihang, CHEN Cui, MA Zhiyi, XU Tingfeng
2026, 43(4): 82-90. DOI: 10.13228/j.boyuan.issn1003-9996.20260411
Abstract
Study on the pickling mechanism based on structural differences of oxide scale in steel grades
WANG Chang, ZHAO Mengying, YU Yang, ZHANG Liangliang, GAO Xiaoli, LIU Wenxin
2026, 43(4): 91-98. DOI: 10.13228/j.boyuan.issn1003-9996.20260412
Abstract
Effect of tempering-induced alloy carbide precipitation on residual stress and flatness of 700L plate
BAO Rongcheng, DING Wenhong, JIANG Yongxin, YANG Yan, WANG Wenguang, YUAN Qiaojun
2026, 43(4): 99-105. DOI: 10.13228/j.boyuan.issn1003-9996.20260413
Abstract
Effect of hot compression and warm deformation on the microstructure of medium carbon steel
WANG Shaojun, XIE Jiaxuan, PAN Yunlong, ZHOU Chaogang, LI Hongbin
2026, 43(4): 106-112. DOI: 10.13228/j.boyuan.issn1003-9996.20260414
Abstract
Effect of w(Mn)/w(S) ratio on inclusion precipitation behavior of 20MnCr5 gear steel hot-rolled bar
WANG Xuhui, YANG Jian, ZHANG Qingsong, BAI Yun, LU Mingxia, YIN Qing, WU Xiaolin, ZHANG Yinhui
2026, 43(4): 113-122. DOI: 10.13228/j.boyuan.issn1003-9996.20260415
Abstract
Effects of heat treatment on microstructure and tensile properties of Alloy 28
GAO Pei, CHEN Songlin, WU Yuhang
2026, 43(4): 123-128. DOI: 10.13228/j.boyuan.issn1003-9996.20260416
Abstract
Influence of end welding on the rolling forming quality of bimetallic composite tubes
WANG Xingcheng, NIU Hui, FU Lun, JI Ce, WANG Tao
2026, 43(4): 129-136. DOI: 10.13228/j.boyuan.issn1003-9996.20260417
Abstract
Research and development of 600 MPa grade hot-rolled dual-phase steel with low silicon content
DONG Yi, SHI Xiaoguang, SUN Chengqian, WANG Junxiong, HAN Chufei, LI Zhi
2026, 43(4): 137-141. DOI: 10.13228/j.boyuan.issn1003-9996.20260418
Abstract
Study on mechanism and control of hot rolling defects for high carbon martensitic stainless steel
WEI Haixia, PAN Jixiang, WAN Zhanxue, XU Bin, ZHAO Dejiang
2026, 43(4): 142-149. DOI: 10.13228/j.boyuan.issn1003-9996.20260419
Abstract
Study on influence and control of process lubrication parameters on strip shape for double-stand wettemper rolling
GONG Zhiqiang, ZHOU Xinfu, CHEN Yuanhong, BAI Zhenhua
2026, 43(4): 150-154. DOI: 10.13228/j.boyuan.issn1003-9996.20260420
Abstract
Design and development of new dentate disc steel pipe pickling production line
LIU Junhua, GUO Congcong, LI Kefei, ZHANG Xinying, LIU Huazhong
2026, 43(4): 155-159. DOI: 10.13228/j.boyuan.issn1003-9996.20260421
Abstract

Total visits    

Today's visit