汽车悬架系统用55SiCr弹簧钢丝带状组织

doi:10.13228/j.boyuan.issn0449-749x.20190303

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (11418 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了研究中心偏析对弹簧钢组织性能的影响,通过金相显微镜、扫描电镜、电子探针等手段研究了55SiCr弹簧钢的元素偏析行为、带状组织及力学性能。结果表明,带状组织由合金元素偏析引起,其内部锰、铬和硅质量分数为非偏析带2倍以上,合金元素偏析引起带状组织,弹簧钢拉伸试样中裂纹起源于偏析带状组织,并沿垂直于带状组织方向扩展导致最终断裂,带状偏析是影响高强度弹簧钢力学性能的主要因素。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	邢献强
	曹文全
	王存宇

关键词 ：高强弹簧钢, 合金元素偏析, 带状组织, 力学性能, 裂纹扩展

Abstract：In order to study the effect of central segregation on the microstructure and properties of spring steel,the elemental segregation behavior,banded structure and mechanical properties of 55SiCr spring steel were studied by means of metallographic microscope,scanning electron microscope and electron probe. The results show that the content of Mn,Cr and Si in the banded structure is more than 1 times higher than that in the matrix. The segregation of alloying elements causes the banded structure. Cracks in the tensile specimens of spring steel originate from the segregated banded structure and eventually fracture through the growth of the banded structure. The banded segregation is an important factor affecting the mechanical properties of high strength spring steel.

Key words： high strength spring steel alloy element segregation band structure mechanical property crack propagation

收稿日期: 2019-07-05

引用本文:

邢献强, 曹文全, 王存宇. 汽车悬架系统用55SiCr弹簧钢丝带状组织[J]. 钢铁, 2020, 55(3): 68-73. XING Xian-qiang, CAO Wen-quan, WANG Cun-yu. Bond structure of 55SiCr steel used for coil springs of automotive suspension system. Iron and Steel, 2020, 55(3): 68-73.

链接本文:

http://www.chinamet.cn/Jweb_gt/CN/10.13228/j.boyuan.issn0449-749x.20190303 或 http://www.chinamet.cn/Jweb_gt/CN/Y2020/V55/I3/68

[1] 马鸣图. 汽车结构用钢的进展[J]. 汽车工程,2005,27(3):269. (MA Ming-tu. The recent progress of automotive structure steel products[J]. Automotive Engineering,2005,27(3):269.)
[2] 徐德祥,尹钟大. 高强度弹簧钢的发展现状和趋势[J]. 钢铁,2004,39(1):67. (XU De-xiang,YIN Zhong-da. The tendency to high strength of spring steels and the effect of alloying elements[J]. Iron and Steel,2004,39(1):67.)
[3] 肖军. 车用悬架弹簧及其市场[J]. 金属制品,2008,34(5):39.(XIAO Jun. Automobile suspension spring and its market[J]. Steel Wire Product,2008,34(5):39.)
[4] 唐劲松. 轿车悬架簧用线材的市场需求与质量要求[J]. 宝钢技术,2006(6):9. (TANG Jin-song. Market demand and quality requirements for suspension spring wire rods[J]. Baosteel Technology,2006(6):9.)
[5] 陈杰,李文军,刘新宽,等. 55SiCr弹簧钢盘条异常断裂原因分析[J]. 金属热处理,2019,44(3):225. (CHEN Jie,LI Wen-jun,LIU Xin-kuan,et al. Abnormal fracture analysis of 55SiCr spring steel wire rods[J]. Heat Treatment of Metals,2019,44(3):225.)
[6] HU Y,CHEN W Q,HAN H B,et al. Influence of calcium treatment on cleanness and fatigue life of 60Si2MnA spring steel[J]. Ironmaking and Steelmaking,2017,44(1):28.
[7] Yoon B H,Heo K H,Kim J,et al. Improvement of steel cleanliness by controlling slag compositon[J]. Ironmaking and Steelmaking,2002,29(3):214.
[8] MA W J,BAO Y P,WANG M,et al. Influence of slag composition on bearing steel cleanness[J]. Ironmaking and Steelmaking,2014,41(1):26.
[9] 吴小良,余国松,金耀辉,等. 轿车悬架弹簧用55CrSi盘条的生产[J]. 轧钢,2005,22(2):71. (WU Xiao-liang,YU Guo-song,JIN Yao-hui. Production of 55CrSi wire rod for suspension spring of automobile[J]. Steel Rolling,2005,22(2):71.)
[10] 张伟,亓显玲,余德河,等. 连铸合金钢白亮带分析[J]. 莱钢科技,2006(1):35.(ZHANG Wei,QI Xian-ling,YU De-he. Analysis of white bright bond of continuous casting alloy steel[J]. Laigang Technology,2006(1):35.)
[11] 张旭,惠卫军,樊刚,等. 高速铁路用弹簧钢60Si2MnA洁净度分析[J]. 热加工工艺,2012,41(11):56. (ZHANG Xu,HUI Wei-jun,FAN Gang,et.al. Cleanliness analysis of 60Si2MnA spring steel used in high-speed rail[J]. Hot Working Technology,2012,41(11):56.)
[12] 纪元,闵云峰,李鹏善,等. 钢中带状组织及其研究现状[J]. 中国冶金,2016,26(4):1. (JI Yuan,MIN Yun-feng,LI Peng-shan. Research status of banding phenomena in steels[J]. China Metallurgy,2016,26(4):1.)
[13] 刘云旭. 金属热处理原理[M]. 北京:机械工业出版社,1981.(LIU Yun-xu. Fundamentals of Metal Heat Treatment[M]. Beijing:Machinery Industry Press,1981.)
[14] 方杭玮,孙丹杰. 弹簧钢中带状偏析对弹条金相组织的影响[J]. 工程建设与设计,2004(8):76. (FANG Hang-wei,SUN Dan-jie. Effect of strip segregation on metallographic structure of spring steel[J]. Construction and Design for Project,2004(8):76.)
[15] 陈涛,时彦林.20CrMo棒材带状组织的控制研究[J]. 材料热处理,2007,36(2):23. (CHEN Tao,SHI Yan-lin. Control of band microstructure of 20CrMo rod[J]. Material and Heat Treatment,2007,36(2):23.)
[16] 张博,郭大勇,高航,等. 汽车螺旋悬架弹簧用钢55SiCrA组织和性能研究[J]. 鞍钢技术,2016(4):35.(ZHANG Bo,GUO Da-yong,GAO Hang,et al. Study on microstructures and properties of 55SiCrA steel used for coil springs of automotive suspension system[J]. Angang Technology,2016(4):35.)
[17] 黄文克,王雷,彭天兰,等. 回火温度对弹簧钢55SiCrA 组织与性能的影响[J]. 金属制品,2011,37(1):61.(HUANG Wen-ke,WANG Lei,PENG Tian-lan,et al. Effect of tempering temperature on microstructure and properties of spring steel 55SiCrA[J]. Steel Wire Products,2011,37(1):61.)
[18] 申丽娟,程光辉,耿艳玲,等. 60Si2Mn弹簧钢失效机理分析[J]. 热加工工艺,2013,42(14):192.(SHEN Li-juan,CHENG Guang-hui,GENG Yan-ling,et al. Failure analysis on spring steel 60Si2Mn[J]. Hot Working Technology,2013,42(14):192.)
[19] 袁宏梅,王军艺,刘新宽,等. 高强度悬架弹簧钢丝的组织结构[J]. 金属热处理,2018,43(2):106.(YUAN Hong-mei,WANG Jun-yi,LIU Xin-kuan,et al. Microstructure of high strength suspension spring steel wire[J]. Heat Treatment of Metals,2018,43(2):106.)
[20] 蒋丽红,田乃媛. 弹簧钢连铸坯中心偏析的研究[J]. 钢铁,2010,45(1):43. (JIANG Li-hong,TIAN Nai-yuan. Spring steel billet centerline segregation study[J]. Iron and Steel,2010,45(1):43.)
[21] 王璐,孙彦辉,焦帅,等. 轴承钢大方坯二次枝晶臂间距数值模拟[J]. 钢铁,2018,53(7):50.(WANG Lu,SUN Yan-hui,JIAO Shuai,et al. Numerical simulation of secondary dendrite arm spacing of bearing steel bloom[J]. Iron and Steel,2018,53(7):50.)