Combustion and Heating Characteristics of Baker of 120 t AOD Furnace
YUAN Ling1,ZHU Miaoyong1,CHEN Jie2
1.School of Materials and Metallurgy, Northeastern University，Shenyang 110004, Liaoning, China; 2.Stainless Steel Branch of Baosteel， Shanghai 201900, China
Abstract：By means of STARCD commercial software, the temperature distribution of 120 t AOD ( Argon and Oxygen Decarburization ) furnace lining during baking process and the combustion characteristics of the baker were investigated with numerical simulation, and the predicted results were validated by actual measurements. The results show that the maximum temperature of AOD furnace lining after baking could reach 1380 K, and the biggest temperature difference in the same circle direction was 20 K. The temperature at the side close to the outlet is relatively high. The biggest temperature difference in height was 40 K, and the temperature in the lowermiddle part was relatively high. The small flow rate and lower temperature of the off gas in AOD led to nonuniform temperature distribution of the wall. The present baking effect was not satisfactory. The simulation results were in good agreement with the measured.
袁玲;朱苗勇;陈洁. 120 t AOD炉烘烤器燃烧加热特性研究[J]. 钢铁, 2009, 44(1): 82-0.
YUAN Ling;ZHU Miaoyong;CHEN Jie. Combustion and Heating Characteristics of Baker of 120 t AOD Furnace. Iron and Steel, 2009, 44(1): 82-0.
2009, Vol. 44 
