Abstract:The research on the high cycle mechanical fatigue test of GCr15 bearing steel under vacuum degassing and electroslage remelting processes was studied. It was observed that under the condition of 107 times fatigue life,the bending fatigue strength of ESR bearing steel was 1 085 MPa,which was higher than that of vacuum degassing steel(1 000 MPa). The fatigue fracture surface was characterized and analyzed by scanning electron microscope. The size of the inclusions derived from the electroslag process was 3.4-25.6 μm,while that of the vacuum degassing process was 13.3-71.9 μm. It is demonstrated that the size of large particle inclusions(DS) and their distribution are the key factors affecting the fatigue strength and life of bearing steels by studying the relationship between the characteristics of entire fatigue process,such as crack initiation core inclusions,the crack expanding fish-eye,the instantaneous fracture zone and the fatigue strength and the life of spin bending fatigue fracture. It was pointed out that reducing the size of large particle inclusions in bearing steel,controlling its distribution and increasing crack tolerance were still the development direction of metallurgical control of high-end bearing steel in the future.
收稿日期: 2018-03-27
出版日期: 2018-11-20
引用本文:
史智越,徐海峰,许 达,俞 峰,曹文全. 冶金工艺对GCr15高周旋转弯曲疲劳性能的影响[J]. , 2018, 53(11): 85-92.
SHI Zhi-yue,XU Hai-feng,XU Da,YU Feng,CAO Wen-quan. Effects of metallurgical craftwork on high bending fatigue performance of GCr15 steel during high cycle rotation. Iron and Steel, 2018, 53(11): 85-92.
虞明全.轴承钢钢种系列的发展状况[J]. 上海金属, 2008(03):49-54.(YU Ming-quan. The development status of bearing steel and it' s grades series[J].Shanghai Metals, 2008(03):49-54)[J].上海金属, 2008, 30(03):49-54
[1]
虞明全.轴承钢钢种系列的发展状况[J]. 上海金属, 2008(03):49-54.(YU Ming-quan. The development status of bearing steel and it' s grades series[J].Shanghai Metals, 2008(03):49-54)[J].上海金属, 2008, 30(03):49-54
[2]
钟顺思, 王昌生.轴承钢[M]. 北京: 冶金工业出版社, 2000.
[2]
钟顺思, 王昌生.轴承钢[M]. 北京: 冶金工业出版社, 2000.
[3]
李昭昆, 雷建中, 徐海峰, 等.国内外轴承钢的现状与发展趋势[J]. 钢铁研究学报, 2016(03):1-12.(LI Zhao-kun, LEI Jian-zhong, XU Hai-feng, et al. Current status and development trend of bearing steel in China and abroad[J]. Journal of Iron and Steel Research, 2016(03):1-12)[J].钢铁研究学报, 2016, 28(03):1-12
[3]
李昭昆, 雷建中, 徐海峰, 等.国内外轴承钢的现状与发展趋势[J]. 钢铁研究学报, 2016(03):1-12.(LI Zhao-kun, LEI Jian-zhong, XU Hai-feng, et al. Current status and development trend of bearing steel in China and abroad[J]. Journal of Iron and Steel Research, 2016(03):1-12)[J].钢铁研究学报, 2016, 28(03):1-12
曹文全, 李绍昆, 雷建中, 等.国内外轴承钢现状与发展趋势[N]. 世界金属导报. 2015-08-11(B12)(Cao Wen-quan, LI Zhao-kun, LEI Jian-zhong, et al. Current status and development trend of bearing steel in China and abroad[N]. Word Metals, 2012-5-08-11(B12))
[5]
曹文全, 李绍昆, 雷建中, 等.国内外轴承钢现状与发展趋势[N]. 世界金属导报. 2015-08-11(B12)(Cao Wen-quan, LI Zhao-kun, LEI Jian-zhong, et al. Current status and development trend of bearing steel in China and abroad[N]. Word Metals, 2012-5-08-11(B12))
尤绍军.我国轴承钢及热加工技术的现状和研究方向[J]. 金属热处理, 2012(01):119-125.(YOU Shao-jun. Status and research directions of bearing steels and heat processes in China[J]. Heat Treatment of Metals, 2012(01):119-125)[J].金属热处理, 2012, 37(01):119-125
[8]
尤绍军.我国轴承钢及热加工技术的现状和研究方向[J]. 金属热处理, 2012(01):119-125.(YOU Shao-jun. Status and research directions of bearing steels and heat processes in China[J]. Heat Treatment of Metals, 2012(01):119-125)[J].金属热处理, 2012, 37(01):119-125
[9]
刘雅政, 周乐育, 张朝磊, 等.重大装备用高品质轴承用钢的发展及其质量控制[J]. 钢铁, 2013(08):1-8.(LIU Ya-zheng, ZHOU Le-yu, ZHANG Chao-lei, et al. Development and Quality Control of Bearing Steel for Heavy Equipment[J]. Iron and Steel, 2013(08):1-8)[J].钢铁, 2013, 48(08):1-8
[9]
刘雅政, 周乐育, 张朝磊, 等.重大装备用高品质轴承用钢的发展及其质量控制[J]. 钢铁, 2013(08):1-8.(LIU Ya-zheng, ZHOU Le-yu, ZHANG Chao-lei, et al. Development and Quality Control of Bearing Steel for Heavy Equipment[J]. Iron and Steel, 2013(08):1-8)[J].钢铁, 2013, 48(08):1-8
[10]
SHIOZAWA K, MORII Y, NISHINO S, et al.Subsurface crack initiation and propagation mechanism in high-strength steel in a very high cycle fatigue regime[J].International Journal of Fatigue, 2006, 28(11):1521-1532
[10]
SHIOZAWA K, MORII Y, NISHINO S, et al.Subsurface crack initiation and propagation mechanism in high-strength steel in a very high cycle fatigue regime[J].International Journal of Fatigue, 2006, 28(11):1521-1532
[11]
马惠霞, 李文竹, 黄磊, 等.轴承钢中硫化物夹杂诱发疲劳裂纹的微观分析[J]. 金属热处理, 2012(03):119-121.(MA Hui-xia, LI Wen-zhu, HUANG Lei, et al. Analysis of sulphide inclusion induced fatigue crack in bearing steel[J]. Heat Treatment of Metals, 2012(03):119-121)[J].金属热处理, 2012, 37(03):119-121
[11]
马惠霞, 李文竹, 黄磊, 等.轴承钢中硫化物夹杂诱发疲劳裂纹的微观分析[J]. 金属热处理, 2012(03):119-121.(MA Hui-xia, LI Wen-zhu, HUANG Lei, et al. Analysis of sulphide inclusion induced fatigue crack in bearing steel[J]. Heat Treatment of Metals, 2012(03):119-121)[J].金属热处理, 2012, 37(03):119-121
[12]
杨俊, 王新华, 龚志翔, 等.超低氧车轮钢中TiN夹杂析出的热力学分析及控制[J].北京科技大学学报, 2010(09):1138-1143.(YANG Jun, WANG Xin-hua, GONG Zhi-xiang, et al. Precipitation thermodynamics analysis and control of titanium nitride inclusions in extra-low oxygen wheel steel[J], 2010(09):1138-1143)[J].北京科技大学学报, 2010, 32(09):1138-1143
[12]
杨俊, 王新华, 龚志翔, 等.超低氧车轮钢中TiN夹杂析出的热力学分析及控制[J].北京科技大学学报, 2010(09):1138-1143.(YANG Jun, WANG Xin-hua, GONG Zhi-xiang, et al. Precipitation thermodynamics analysis and control of titanium nitride inclusions in extra-low oxygen wheel steel[J], 2010(09):1138-1143)[J].北京科技大学学报, 2010, 32(09):1138-1143
Spriestersbach D, Brodyanski A, L Sch J, et al.Very high cycle fatigue of bearing steels with artificial defects in vacuum[J].Materials Science and Technology, 2016, 32(11):1111-1118
[14]
Spriestersbach D, Brodyanski A, L Sch J, et al.Very high cycle fatigue of bearing steels with artificial defects in vacuum[J].Materials Science and Technology, 2016, 32(11):1111-1118
[15]
李伟.GCr15钢超高周疲劳行为的研究[D]. 西南交通大学, 2007(LI Wei. Fatigue behavior of GCr15 steel in gigacycle regime[D]. Southwest Jiaotong University, 2007).
[15]
李伟.GCr15钢超高周疲劳行为的研究[D]. 西南交通大学, 2007(LI Wei. Fatigue behavior of GCr15 steel in gigacycle regime[D]. Southwest Jiaotong University, 2007).
[16]
鲁连涛, 李伟, 张继旺, 等.GCr15钢旋转弯曲超长寿命疲劳性能分析[J]. 金属学报, 2009(01):73-78(LU Lian-tao, LI Wei, ZHANG Ji-wang, et al. Analysis of rotary bending gigacycle fatigue properties of bearing steel GCr15[J]. Acta Metallurgica Sinica, 2009(01):73-78).[J].金属学报, 2009, 45(01):73-78
[16]
鲁连涛, 李伟, 张继旺, 等.GCr15钢旋转弯曲超长寿命疲劳性能分析[J]. 金属学报, 2009(01):73-78(LU Lian-tao, LI Wei, ZHANG Ji-wang, et al. Analysis of rotary bending gigacycle fatigue properties of bearing steel GCr15[J]. Acta Metallurgica Sinica, 2009(01):73-78).[J].金属学报, 2009, 45(01):73-78
Claude Bathias.Fatigue of Materials and Structures[M]. Beijing: National Defense Industry Press, 2016..
[18]
Claude Bathias.Fatigue of Materials and Structures[M]. Beijing: National Defense Industry Press, 2016..
[19]
张继明, 张建锋, 杨振国, 等.高强钢中最大夹杂物的尺寸估计与疲劳强度预测[J]. 金属学报, 2004(08):846-850.(ZHANG Ji-ming, ZHANG Jian-feng, YANG Zheng-guo, et al. Estimation of maximum inclusion size and fatigue strength in high strength steel[J]. Acta Metallurgica Sinica, 2004(08) :846-850)[J].金属学报, 2004, 40(08):846-850
[19]
张继明, 张建锋, 杨振国, 等.高强钢中最大夹杂物的尺寸估计与疲劳强度预测[J]. 金属学报, 2004(08):846-850.(ZHANG Ji-ming, ZHANG Jian-feng, YANG Zheng-guo, et al. Estimation of maximum inclusion size and fatigue strength in high strength steel[J]. Acta Metallurgica Sinica, 2004(08) :846-850)[J].金属学报, 2004, 40(08):846-850