A thermodynamic model of desulfurization for CaO-SiO2-MgO-Al2O3-Na2O slag based on IMCT theory
LEI Jia-liu1, ZHAO Dong-nan1, ZHU Hang-yu2, JIANG Yue-dong3
(1. Metallurgy Engineering Department, School of Materials Science and Engineering, Hubei Polytechnic University,Huangshi 435003, Hubei, China; 2. Hubei Provincial Engineering Technology Research Center of Metallurgical Secondary Resources, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China)
3. Wuhan Branch, Baosteel Central Research Institute, Wuhan 430080, Hubei, China
Abstract:In order to accurately characterize the desulfurization capacity of the Na2O-containing slag system and improve the desulfurization effect, the thermodynamic model for the mass action concentrations calculation for the CaO-SiO2-MgO-Al2O3-Na2O slag system and the thermodynamic model of the desulfurization for the slag at 1 753 K were established, based on the ion and molecule coexistence theory (IMCT). Then the influence factors of total sulfur distribution ratio and the respective sulfur distribution ratio of the slag were discussed and analyzed. The theoretical results showed that, aparting from the LS, MgS, with the increasing of the mass percent of Al2O3, the desulfurization capacity of the slag significantly decreased. While the increasing of the mass percent of MgO and Na2O can significantly promote the desulfurization capability of the slag. In addition, a small amount of the mass percent of Na2O showed a strong effect on the desulphurization capability, which provided a theoretical basis for the application of the Na2O-containing secondary metallurgical resources and the optimization of the desulfurization slag system in the desulphurization process for the hot metal.
雷家柳, 赵栋楠, 朱航宇, 蒋跃东. 基于IMCT理论的CaO-SiO2-MgO-Al2O3-Na2O渣系的脱硫热力学模型[J]. 钢铁, 2019, 54(3): 35-41.
LEI Jia-liu1, ZHAO Dong-nan1, ZHU Hang-yu2, JIANG Yue-dong3. A thermodynamic model of desulfurization for CaO-SiO2-MgO-Al2O3-Na2O slag based on IMCT theory. Iron and Steel, 2019, 54(3): 35-41.
黄孝山, 储焰平, 肖赛君, 等. 渣金间硫磷分配比若干理论问题的分析[J]. 中国冶金, 2016, 26(8): 28.(HUANG Xiao-shang, CHU Yan-ping, XIAO Sai-jun, et al. Theoretical analysis on distribution ratio of S and P between slag[J]. China Metallurgy, 2016, 26(8): 28.)
[1]
黄孝山, 储焰平, 肖赛君, 等. 渣金间硫磷分配比若干理论问题的分析[J]. 中国冶金, 2016, 26(8): 28.(HUANG Xiao-shang, CHU Yan-ping, XIAO Sai-jun, et al. Theoretical analysis on distribution ratio of S and P between slag[J]. China Metallurgy, 2016, 26(8): 28.)
[2]
Andersson M A T, Jonsson P G, Nzotta M M. Application of the sulphide capacity concept on high-basicity ladle slags used in bearing-steel production[J]. ISIJ Int., 1999, 39(11): 1140.
[2]
Andersson M A T, Jonsson P G, Nzotta M M. Application of the sulphide capacity concept on high-basicity ladle slags used in bearing-steel production[J]. ISIJ Int., 1999, 39(11): 1140.
[3]
Nzotta M M, Sichen D, Seetharaman S. Sulphide capacities in some multi-component slag systems[J]. ISIJ Int., 1998, 38(11): 1170.
[3]
Nzotta M M, Sichen D, Seetharaman S. Sulphide capacities in some multi-component slag systems[J]. ISIJ Int., 1998, 38(11): 1170.
[4]
李霞, 丁跃华, 黄帮福. 高炉CaO-SiO2-Al2O3-MgO-TiO2渣与铁液间硫分配比的热力学模型[J]. 钢铁研究学报, 2012, 24(7): 19.(L I Xia, Ding Yue-hua, HUANG Bang-fu. A thermodynamic model for calculation of sulphur distribution ratio between CaO-SiO2-Al2O3-MgO-TiO2 BF slag and hot metal[J]. Journal of Iron & Steel Research, 2012, 24(7): 19.)
[4]
李霞, 丁跃华, 黄帮福. 高炉CaO-SiO2-Al2O3-MgO-TiO2渣与铁液间硫分配比的热力学模型[J]. 钢铁研究学报, 2012, 24(7): 19.(L I Xia, Ding Yue-hua, HUANG Bang-fu. A thermodynamic model for calculation of sulphur distribution ratio between CaO-SiO2-Al2O3-MgO-TiO2 BF slag and hot metal[J]. Journal of Iron & Steel Research, 2012, 24(7): 19.)
[5]
Takahashi K, Utagawa K, Shibata H, et al. Influence of solid CaO and liquid slag on hot metal desulfurization[J]. Transactions of the Iron & Steel Institute of Japan, 2012, 52(1): 10.
[5]
Takahashi K, Utagawa K, Shibata H, et al. Influence of solid CaO and liquid slag on hot metal desulfurization[J]. Transactions of the Iron & Steel Institute of Japan, 2012, 52(1): 10.
[6]
Kikuchi N, Nabeshima S, Takeuchi S, et al. Effect of hot metal temperature and rotation speed on the rate of desulfurization rate by mechanical stirring process[J]. Tetsu-to-Hagane, 2009, 90(6): 322.
[6]
Kikuchi N, Nabeshima S, Takeuchi S, et al. Effect of hot metal temperature and rotation speed on the rate of desulfurization rate by mechanical stirring process[J]. Tetsu-to-Hagane, 2009, 90(6): 322.
[7]
Niekerk W H V, Dippenaar R J. Thermodynamic aspects of Na2O and CaF2 containing lime-based slags used for the desulphurization of hot-metal[J]. Transactions of the Iron & Steel Institute of Japan, 2007, 33(1): 59.
[7]
Niekerk W H V, Dippenaar R J. Thermodynamic aspects of Na2O and CaF2 containing lime-based slags used for the desulphurization of hot-metal[J]. Transactions of the Iron & Steel Institute of Japan, 2007, 33(1): 59.
[8]
N.M.Chuiko. On the structural theory of metallurgical slags[J]. Ferrous Met, 1959, (5): 3.
[8]
N.M.Chuiko. On the structural theory of metallurgical slags[J]. Ferrous Met, 1959, (5): 3.
[9]
史成斌, 郭汉杰, 丁汝才, 等. CaO-SiO2-MgO-Al2O3渣系与碳饱和铁液间硫分配比的热力学模型[J]. 过程工程学报, 2010, 10(s1): 158. (SHI Cheng-bin, GUO Han-jie, DING Ru-cai, et al. A thermodynamic model for calculation of sulphur distribution ratio between CaO-SiO2-MgO-Al2O3 Slags and carbon saturated hot metal[J]. Chinese Journal of Process Engineering, 2010, 10(s1): 158.)
[9]
史成斌, 郭汉杰, 丁汝才, 等. CaO-SiO2-MgO-Al2O3渣系与碳饱和铁液间硫分配比的热力学模型[J]. 过程工程学报, 2010, 10(s1): 158. (SHI Cheng-bin, GUO Han-jie, DING Ru-cai, et al. A thermodynamic model for calculation of sulphur distribution ratio between CaO-SiO2-MgO-Al2O3 Slags and carbon saturated hot metal[J]. Chinese Journal of Process Engineering, 2010, 10(s1): 158.)
[10]
张鉴. 冶金熔体和溶液的计算热力学[M]. 北京:冶金工业出版社, 2007.(ZHANG Jian. Computational Thermodynamics of Metallurgical Melts and Solutions[M]. Beijing: Metallurgical Industry Press, 2007.)
[10]
张鉴. 冶金熔体和溶液的计算热力学[M]. 北京:冶金工业出版社, 2007.(ZHANG Jian. Computational Thermodynamics of Metallurgical Melts and Solutions[M]. Beijing: Metallurgical Industry Press, 2007.)
[11]
李显鹏, 高金涛, 张延玲, 等. CaO-FeO-SiO2-Al2O3/Na2O/TiO2渣系与碳饱和铁水间磷分配行为[J]. 钢铁, 2017, 52(2): 18.(L I Xian-Peng, Gao Jin-tao, Zhang Yan-ling, et al. Distribution behavior of phosphorus between CaO-FeO-SiO2-Al2O3/Na2O/TiO2 slags and carbon-saturated iron[J]. Iron & Steel, 2017, 52(2): 18.)
[11]
李显鹏, 高金涛, 张延玲, 等. CaO-FeO-SiO2-Al2O3/Na2O/TiO2渣系与碳饱和铁水间磷分配行为[J]. 钢铁, 2017, 52(2): 18.(L I Xian-Peng, Gao Jin-tao, Zhang Yan-ling, et al. Distribution behavior of phosphorus between CaO-FeO-SiO2-Al2O3/Na2O/TiO2 slags and carbon-saturated iron[J]. Iron & Steel, 2017, 52(2): 18.)
[12]
张康晖, 张延玲, 李凤善, 等. CaO-SiO2-Al2O3-Na2O-TiO2-(MgO)渣系与碳饱和铁液间硫分配比的热力学模型[J]. 钢铁研究学报, 2018, 30(4): 265.(ZHANG Kang-hui, ZHANG Yan-ling, LI Feng-shan, et al. A thermodynamic model for calculation of sulfur distribution ratio between CaO-SiO2- Al2O3-Na2O-TiO2-(MgO) slags and carbon saturated hot metal[J]. Journal of Iron & Steel Research, 2018, 30(4): 265.)
[12]
张康晖, 张延玲, 李凤善, 等. CaO-SiO2-Al2O3-Na2O-TiO2-(MgO)渣系与碳饱和铁液间硫分配比的热力学模型[J]. 钢铁研究学报, 2018, 30(4): 265.(ZHANG Kang-hui, ZHANG Yan-ling, LI Feng-shan, et al. A thermodynamic model for calculation of sulfur distribution ratio between CaO-SiO2- Al2O3-Na2O-TiO2-(MgO) slags and carbon saturated hot metal[J]. Journal of Iron & Steel Research, 2018, 30(4): 265.)
[13]
Tsujino R, Nakashima J, Hirai M, et al. Behavior of desulfurization in ladle steel refining with powder injection at reduced pressures[J]. Transactions of the Iron & Steel Institute of Japan, 1989, 29(1): 92.
[13]
Tsujino R, Nakashima J, Hirai M, et al. Behavior of desulfurization in ladle steel refining with powder injection at reduced pressures[J]. Transactions of the Iron & Steel Institute of Japan, 1989, 29(1): 92.
[14]
Mitsutaka Hino, Kimihisa Ito. Thermodynamic Data for Steelmaking[M]. Tohoku University Press, 2010.
[14]
Mitsutaka Hino, Kimihisa Ito. Thermodynamic Data for Steelmaking[M]. Tohoku University Press, 2010.
[15]
Elliott J F, Gleiser M, Ramakrishna V, et al. Thermochemistry for Steelmaking[M]. Addison-Wesley Pub. Co, 1960.
[15]
Elliott J F, Gleiser M, Ramakrishna V, et al. Thermochemistry for Steelmaking[M]. Addison-Wesley Pub. Co, 1960.
[16]
朱苗勇. 现代冶金学[M]. 北京: 冶金工业出版社, 2005.(ZHU Miao-yong. Modern Metallurgy[M]. Beijing: Metallurgical Industry Press, 2005.)
[16]
朱苗勇. 现代冶金学[M]. 北京: 冶金工业出版社, 2005.(ZHU Miao-yong. Modern Metallurgy[M]. Beijing: Metallurgical Industry Press, 2005.)
[17]
黄希祜. 钢铁冶金原理[M]. 北京: 冶金工业出版社, 2004.(HUANG Xi-hu. Principles of Steel Metallurgy[M]. Beijing: Metallurgical Industry Press, 2004.)
[17]
黄希祜. 钢铁冶金原理[M]. 北京: 冶金工业出版社, 2004.(HUANG Xi-hu. Principles of Steel Metallurgy[M]. Beijing: Metallurgical Industry Press, 2004.)
[18]
ZHANG G H, CHOU K C, MILLS K. Modelling viscosities of CaO-Al2O3-SiO2-MgO molten slags[J]. ISIJ International, 2012, 52(3): 355.
[18]
ZHANG G H, CHOU K C, MILLS K. Modelling viscosities of CaO-Al2O3-SiO2-MgO molten slags[J]. ISIJ International, 2012, 52(3): 355.
[19]
张明博,李俊国,马红强. 组分含量对CaO-MgO-Al2O3-SiO2四元精炼渣系粘度的影响[J]. 特殊钢, 2013, 34(2): 28.(ZHANG Ming-bo, LI Jun-guo, MA Hong-qiang. Effect of ingredient on viscosity of CaO-MgO-Al2O3-SiO2 quaternary refining slag series[J]. Special Steel, 2013, 34(2): 28.)
[19]
张明博,李俊国,马红强. 组分含量对CaO-MgO-Al2O3-SiO2四元精炼渣系粘度的影响[J]. 特殊钢, 2013, 34(2): 28.(ZHANG Ming-bo, LI Jun-guo, MA Hong-qiang. Effect of ingredient on viscosity of CaO-MgO-Al2O3-SiO2 quaternary refining slag series[J]. Special Steel, 2013, 34(2): 28.)
[20]
PAK J J, ITO K, FRUEHAN F J. Activities of Na2O in CaO-based slags used for dephosphorization of steel[J]. ISIJ International, 1989, 29(4): 318.
[20]
PAK J J, ITO K, FRUEHAN F J. Activities of Na2O in CaO-based slags used for dephosphorization of steel[J]. ISIJ International, 1989, 29(4): 318.