(1. National Engineering Research Center for Equipment and Technology of Cold Rolling Strip,
Yanshan University, Qinhuangdao 066004, Hebei， China;2. State Key Laboratory of Metastable
Materials Science and Technology, Yanshan University, Qinhuangdao 066004, Hebei, China)
Abstract：The flatness measurement and control are the key technology to improve the flatness quality of the cold rolling strip. The structure and size of the flatness measurement rollers of different rolling mills are quite different，and the electric drive of the flatness meter may be active or passive. An unreasonable electric drive of the flatness meter may cause the slippage between strip and roller，which may scratch the strip. To solve the above problem，the overall selection criteria of active and passive schemes are elaborated firstly. Then，the concept of the skidding safety factor is put forward，and the main factors causing skidding are analyzed. The skidding safety factor is taken as the criterion for selecting the electric drive scheme of the new flatness meter. Aiming at the passive scheme，the specific measures for increasing skidding safety factor are put forward. Aiming at the active scheme，specific motor selection theory is established. Finally，different electric drive schemes are verified through two sets of industrial flatness measurement meter.
于华鑫，王东城，刘宏民，张帅，杨利坡. 冷轧带材板形辊传动方案设计[J]. 钢铁, 2019, 54(7): 56-60.
YU Huaxin,WANG Dongcheng,LIU Hongmin,ZHANG Shuai,YANG Lipo. Electric drive scheme design of flatness meter for cold rolling strip. Iron and Steel, 2019, 54(7): 56-60.
