Research progress on inclusion control of non-oriented silicon steel with REM treatment
YANG Jian1,2, LI Ting-ting1,2
1. School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China; 2. State Key Laboratory of Advanced Special Steel, Shanghai University, Shanghai 200444, China
Abstract:The magnetic properties of cold rolled non-oriented silicon steel which are highly dependent on the steelmaking technology, are affected by chemical compositions, distribution of inclusions, recrystallization structure and so on in steel. Long strip or angular inclusions usually have a greater impact on coercivity and hysteresis loss than spherical inclusions. The inclusions which have great influence on the magnetic properties of non-oriented silicon steel are mainly with the size smaller than 0.5 μm. The effects of rare earth metal(REM) treatment on inclusions in non-oriented silicon steel are summarized and analyzed, including coarsening inclusions, reducing the number of fine inclusions in steel and spheroidizing inclusions. REM have strong deoxidation ability and can effectively purify molten steel. With the addition of REM, the rare earth oxides or rare earth oxide sulfides generated in non-oriented silicon steel are usually spherical or nearly spherical. Due to the high surface activity of REM, the generated fine inclusions are easier to polymerize and grow up in the molten steel, and finally achieve the modification and coarsening of inclusions. Because the rare earth sulfides and rare earth oxide sulfides have high melting point and are difficult to form solid solution, the solid solution amount of S element can be effectively reduced during reheating process and the precipitation of fine MnS inclusions can be inhibited during cooling process. In addition, AlN and MnS inclusions are easy to precipitate on the surface of rare earth inclusions, further reducing the amount of fine precipitates. REM can improve the texture of products and has the optimal addition amount. At the same time, the technology of rare earth addition during the refining process of non-oriented silicon steel at home and abroad is analyzed. The ladle addition method is mainly used in the refining process of non-oriented silicon steel. The rare earth treatment results are ensured by adding REM under vacuum, pre-deoxidizing the molten steel by adding Al and Si elements, and injecting desulfurizer before the addition of REM, and then fully stirring the molten steel after adding REM. However, there is still the nozzle clogging problem caused by rare earth inclusions in the process of continuous casting, which needs to be studied.
杨健, 李婷婷. 稀土处理的无取向硅钢夹杂物控制研究进展[J]. 钢铁, 2022, 57(7): 1-15.
YANG Jian, LI Ting-ting. Research progress on inclusion control of non-oriented silicon steel with REM treatment[J]. Iron and Steel, 2022, 57(7): 1-15.
[1] 朱健, 黄海友, 谢建新. 近年稀土钢研究进展与加速研发新思路[J]. 钢铁研究学报, 2017, 29(7): 513. (ZHU Jian, HUANG Hai-you, XIE Jian-xin. Recent progress and new ideas for accelerating research in rare earth steel[J]. Journal of Iron and Steel Research,2017, 29(7): 513.) [2] Minoru Takashima, Nobuyuki Morito, Atsuhito Honda, et al. Nonoriented electrical steel sheet with low iron loss for high-efficiency motor cores[J]. IEEE Transactions on Magnetics, 1999, 35(1): 557. [3] Takeshi Kubota. Recent progress on non-oriented sillicon steel [J]. Steel Research International, 2005, 76(6): 464. [4] 缪乐德, 张毅, 张峰, 等. 不同牌号无取向硅钢夹杂物定性定量分析[J]. 冶金分析, 2012, 32(10): 7. (MIAO Le-de, ZHANG Yi, ZHANG Feng, et al. Qualitative and quantitative analysis of inclusions in non-oriented silica steel with different trademark[J]. Metallurgical Analysis, 2012, 32(10):7.) [5] 张净源, 任慧平, 金自力, 等. 新能源汽车用含稀土无取向硅钢生产过程中组织、织构演变[J]. 金属热处理, 2020, 45(10): 99. (ZHANG Jing-yuan, REN Hui-ping, JIN Zi-li, et al. Microstructure and texture evolution of rare-earth non-oriented silicon steel for new energy vehicles during production[J]. Heat Treatment of Metals, 2020, 45(10): 99.) [6] Atsuhito Honda, Keiji Sato, Isamu Ohyama. Effects of core materials on efficiency of inverter drive motor[J]. Kawasaki Steel Technical Steel Report, 1998, 39: 36. [7] 朱诚意, 鲍远凯, 汪勇, 等. 新能源汽车驱动电机用无取向硅钢应用现状和性能调控研究进展[J]. 材料导报, 2021,45(23): 23089. (ZHU Cheng-yi, BAO Yuan-kai, WANG Yong, et al. Research progress on application status and property control of non-oriented silicon steel for traction motor of new energy vehicles[J]. Materials Review, 2021,45(23): 23089.) [8] WANG Li-jun, LIU Yan-qiang, WANG Qi, et al. Evolution mechanisms of MgO·Al2O3 inclusions by cerium in Spring steel used in fasteners of high-speed railway[J]. ISIJ International, 2015, 55(5): 970. [9] 王龙妹. 稀土元素在新一代高强韧钢中的作用和应用前景[J]. 中国稀土学报, 2004, 22(1): 48. (WANG Long-mei. Application prospects and behavior of RE in new generation high strength steels with superior toughness[J]. Journal of the Chinese Rare Earth Society, 2004, 22(1): 48.) [10] 李春龙. 稀土在钢中的应用及需注意的一些问题[J]. 稀土, 2001, 22(4): 1. (LI Chun-long. Some suggestions on application of rare earth in steel[J]. Chinese Rare Earths, 2001, 22(4): 1.) [11] 张峰, 马长松, 王波, 等. 采用稀土处理去除无取向硅钢中的夹杂物[C]//第八届(2011)中国钢铁年会论文集.北京: 冶金工业出版社, 2011:1333. (ZHANG Feng, MA Chang-song, WANG bo, et al. Control of inclusions of non-oriented silicon steel sheets by RE treatment[C]//Proceedings of the 8th (2011) China Iron and Steel Annual Conference. Beijing: Metallurgical Industry Press, 2011:1333.) [12] 王龙妹, 谭清元, 李娜, 等. 稀土在无取向电工钢中应用的研究进展[J]. 中国稀土学报, 2014, 32(5): 513. (WANG Long-mei, TAN Qing-yuan, LI Na, et al. Research progress on rare earth application technology in non-oriented electrical steels[J]. Journal of the Chinese Society of Rare Earths, 2014, 32(5): 513.) [13] WAN Yong, CHEN Wei-qing. Effect of boron content on the microstructure and magnetic properties of non-oriented electrical steels[J]. Journal of Wuhan University of Technology-Mater, 2015, 30(3): 574. [14] DONG Hao, ZHAO Yu, JUAN Xiao-jun, et al. Effects of Sn addition on core loss and texture of non-oriented electrical steels[J]. Journal of Iron and Steel Research, International, 2009, 16(6): 86. [15] Atul Saxena, Sajal-kanti Chaudhuri. Correlating the aluminum content with ferrite grain size and core loss in non-oriented electrical steel[J]. ISIJ International, 2004, 44(7):1273. [16] 薛利强, 潘振东, 吕令涛, 等. 超高牌号无取向硅钢降钛工艺研究及改进[J]. 中国冶金, 2020, 30(10): 60. (XUE Li-qiang, PAN Zhen-dong, LÜ Ling-tao, et al. Research and improvement of technology to reduce Ti content in super-high grade non-oriented electrical steel[J]. China Metallurgy, 2020, 30(10): 60.) [17] REN Qiang, ZHANG Li-feng, YANG Wen. Effect of oxide inclusions on the magnetic properties of non-oriented electrical steel[J]. Steel Research International, 2018, 89(12): 1. [18] WANG Jia-yi, REN Qiang, LUO Yan, et al. Effect of non-metallic precipitates and grain size on core loss of non-oriented electrical silicon steels[J]. Journal of Magnetism and Magnetic Materials, 2018, 451: 454. [19] Masahiro Fujikura, Hidekuni Murakami, Yoshiyuki Ushigami, et al. Effects of Cu precipitates on magnetic properties of nonoriented electrical steel[J]. IEEE Transactions on Magnetics, 2015, 51(5): 1. [20] Morio Shiozaki, Yousuke Kurosaki. The effects of grain size on the magnetic properties of nonoriented electrical steel sheets[J]. Journal Materials Engineering, 1989, 11(1):37. [21] Wilson W G, R Kay D Alan, Vahed A. The use of thermodynamics and phase equilibria to predict the behavior of the rare earth elements in steel[J]. The Journal of The Minerals, Metals and Materials Society, 1974, 26(3): 14. [22] 程朝阳, 钟柏林, 景文强, 等. Cr对含Nb高强无取向硅钢组织、织构及性能的影响[J]. 钢铁, 2022, 57(5): 90. (CHENG Zhao-yang, ZHONG Bo-lin, JING Wen-qiang, et al. Effect of Cr on microstructure, texture and properties of Nb-containing high strength non-oriented silicon steel[J]. Iron and Steel, 2022, 57(5): 90.) [23] Zener C. Grains, phases, and interfaces: An interpretation of microstructure[J]. Metals Technology, 2021, 175: 15. [24] FAN Li-feng, ZHU Rong, HE Jian-zhong, et al. Effect of rare earth element La on texture and inclusion of non-oriented electrical steel produced by thin slab casting and rolling process[J]. ISIJ International, 2018, 58(12): 2348. [25] Yousuke Kurosaki, Morio Shiozaki, Kazutaka Higashine, et al. Effect of oxide shape on magnetic properties of semiprocessed nonoriented electrical steel sheets[J]. ISIJ International, 1999, 39(6): 607. [26] Guo L, Roelofs H, Lembke M I, et al. Effect of manganese sulphide particle shape on the pinning of grain boundary[J]. Materials Science and Technology, 2016, 33(8): 1013. [27] 周莉, 董梦瑶, 金自力, 等. 复合稀土微合金化对无取向硅钢组织及夹杂物的影响[J]. 金属热处理, 2017, 42(7): 6. (ZHOU Li, DONG Meng-yao, JIN Zi-li, et al. Effect of mischmetal microalloying on microstructure and inclusion of non-oriented silicon steel[J]. Heat Treatment of Metals, 2017, 42(7): 6.) [28] Bóc István, Cziráki ágnes, Gróf Tams, et al. Analysis of inclusions in cold-rolled n.o. Si-Fe strips[J]. Journal of Magnetism and Magnetic Materials, 1990, 83(1/2/3): 381. [29] Taisei Nakayama, Noriyuki Honjou. Effect of aluminum and nitrogen on the magnetic properties of non-oriented semi-processed electrical steel sheet[J]. Journal of Magnetism and Magnetic Materials, 2000, 213: 87. [30] 郭艳永, 蔡开科, 骆忠汉, 等. 钙处理对冷轧无取向硅钢磁性的影响[J]. 北京科技大学学报, 2005, 27(4): 427. (GUO Yan-yong, CAI Kai-ke, LUO Zhong-han, et al. Behavior of microinclusions in cold-rolled non-oriented silicon steel[J]. Journal of University Science and Technology Beijing, 2005, 27(4): 427.) [31] 吕学钧, 张峰, 王波, 等. 夹杂物对无取向硅钢磁性能的影响[J]. 特殊钢, 2012, 33(4): 22. (LÜ Xue-Jun, ZHANG Feng, WANG Bo, et al. Effects of inclusions on magnetic properties of non-oriented silicon steel[J]. Special Steel, 2012, 33(4): 22.) [32] 王宝明, 赵志毅, 陈凌峰, 等. 夹杂物尺寸及数量对无取向硅钢磁性能的影响的主要成分回归分析[J]. 冶金分析, 2014, 34(10): 1. (WANG Bao-ming, ZHAO Zhi-yi, CHEN Ling-feng, et al. Principal component regression analysis on the size and quantity of inclusions affecting magnetic properties of non-oriented silicon steel[J]. Metallurgical Analysis, 2014, 34(10): 1.) [33] 陈凌峰, 赵志毅. 冷却速率对无取向硅钢中夹杂物析出行为的影响[J]. 特殊钢, 2015, 36(4): 55. (CHEN Ling-feng, ZHAO Zhi-yi. Effect of cooling rate on precipitating behavior of inclusions in non-oriented silicon steel[J]. Special Steel, 2015, 36(4): 55.) [34] 程林, 胡志远, 庞炜光, 等. 无取向硅钢夹杂物分布及对带钢性能一致性的影响研究[J]. 连铸, 2019(1): 44. (CHENG Lin, HU Zhi-yuan, PANG Wei-guang, et al. Inclusions distribution in non-oriented silicon steel and its influence on performance consistency of strip steel[J]. Continuous Casting, 2019(1): 44.) [35] KONG Wei, CHEN Ying-feng, CANG Da-qiang. A statistical study of inclusions in medium-grade non-oriented silicon steel[J]. Metallurgical Research and Technology, 2019, 116(2): 1. [36] QIAO Jia-long, GUO Fei-hu, HU Jin-wen, et al. Precipitates in compact strip production (CSP) process non-oriented electrical steel[J]. Metals, 2020, 10(10):1. [37] De Campos M F, Teixeira J C, Landgraf F J G. The optimum grain size for minimizing energy losses in iron[J]. Journal of Magnetism and Magnetic Materials, 2006, 301(1):94. [38] Lyudkouvsky G, Southwick P D. The effect of thermomechanical history upon the microstructure and magnetic properties of nonoriented silicon steels[J]. Metallurgical Transactions A, 1986, 17(8): 1267. [39] 张峰. 硫元素对无取向硅钢显微组织和电磁性能的影响[J]. 钢铁钒钛, 2020, 41(3): 143. (ZHANG Feng. Effect of sulfur element on microstructure and magnetic properties of the finished non-oriented silicon steel sheets[J]. Iron Steel Vanadium Titanium, 2020, 41(3): 143.) [40] SHI Cai-juan, JIN Zi-li, REN Hui-ping, et al. Effect of lanthanum on recrystallization behavior of non-oriented silicon steel[J]. Journal of Rare Earths, 2017, 35(3): 309. [41] 李兆振, 宋新莉, 刘静, 等. 铬、锰及退火温度对无取向硅钢组织性能影响[J]. 钢铁, 2020, 55(5): 80. (LI Zhao-zhen, SONG Xin-li, LIU Jing, et al. Effect of Cr,Mn and annealing temperature on properties of non-oriented silicon steel[J]. Iron and Steel, 2020, 55(5): 80.) [42] 林勤, 宋波, 郭兴敏, 等. 钢中稀土微合金化作用与应用前景[J]. 稀土, 2001(4): 31. (LIN Qin, SONG Bo, GUO Xing-min, et al. Effects of RE on microalloying in steel and application prospects[J]. Chinese Rare Earths, 2001(4):31.) [43] ZHU Cheng-yi, CHEN Xian-hong, ZHANG Li-fang, et al. Effects of RE on precipitation behaviors of the inclusions and magnetic properties of non-oriented electrical steel[J]. Materials Science Forum, 2016, 852: 38. [44] REN Qiang, ZHANG Li-feng, LIU Yu-bao, et al. Transformation of cerium-containing inclusions in ultra-low-carbon aluminum-killed steels during solidification and cooling[J]. Journal of Materials Research and Technology, 2020, 9(4): 8197. [45] 刘海明, 高力. 稀土金属在无取向硅钢中的作用[J]. 钢铁, 1987, 22(11): 41. (LIU Hai-ming, GAO Li. The effect of rare metals in non-oriented silicon steel[J]. Iron and Steel, 1987, 22(11): 41.) [46] HOU Chun-kan, LIAO Chun-chi. Effect of cerium content on the magnetic properties of non-oriented electrical steels[J]. ISIJ International, 2008, 48(4): 531. [47] 张峰, 吕学钧, 王波, 等. 稀土处理无取向硅钢中夹杂物的控制[J]. 钢铁钒钛, 2011, 32(3): 46. (ZHANG Feng, LÜ Xue-jun, WANG Bo, et al. Control of inclusions of non-oriented silicon steel sheets by RE treatment[J]. Iron Steel Vanadium Titanium, 2011, 32(3): 46.) [48] 张峰, 李光强, 朱诚意. 稀土处理无取向硅钢中的夹杂物与电磁性能变化[J]. 功能材料, 2013, 44(7): 1029. (ZHANG Feng, LI Guang-qiang, ZHU Cheng-yi. Heredity characters of inclusions and electromagnetic properties of non-oriented silicon steel treated by rare earth alloy[J]. Journal of Functional Materials, 2013, 44(7): 1029.) [49] WAN Yong, CHEN Wei-qing, WU Shao-jie. Effect of lanthanum content on microstructure and magnetic properties of non-oriented electrical steels[J]. Journal of Rare Earths, 2013, 31(7): 727. [50] 岳尔斌, 李娜. 稀土铈对2.9%Si无取向硅钢磁性能的影响[J]. 钢铁, 2014, 49(12): 65. (YUE Er-bin, LI Na. Effect of rare earth cerium on the magnetic properties of 2.9%Si non-oriented electrical steels[J]. Iron and Steel, 2014, 49(12): 65.) [51] WAN Yong, CHEN Wei-qing, WU Shao-jie. Effects of lanthanum and boron on the microstructure and magnetic properties of non-oriented electrical steels[J]. High Temperature Materials and Processes, 2014, 33(2): 115. [52] 董梦瑶, 金自力, 任慧平, 等. 稀土对冷轧无取向低碳低硅电工钢组织及织构的影响[J]. 金属热处理, 2015, 40(5): 6. (DONG Meng-yao, JIN Zi-li, REN Hui-ping, et al. Effects of RE on microstructure and texture of non-oriented low-carbon electrical steel[J]. Heat Treatment of Metals, 2015, 40(5): 6. [53] 李培忠, 马良, 马国明, 等. 铈对3.0%Si无取向电工钢磁性能的影响[J]. 稀土, 2016, 37(2): 81. (LI Pei-zhong, MA Liang, MA Guo-ming, et al. Effect of cerium content on the magnetic properties of 3.0%Si non-oriented electrical steel[J]. Chinese Rare Earths, 2016, 37(2): 81.) [54] LI Na, WANG Yong-qiang, QIU Sheng-tao, et al. Effect of Ce on the evolution of recrystallization texture in a 1.2%Si-0.4%Al non-oriented electrical steel[J]. ISIJ International, 2016, 56(7): 1256. [55] WAN Yong, WU Shao-jie, LI Jie. Effects of complex trace elements on the microstructure and magnetic properties of non-oriented electrical steels[J]. Metallurgical Research and Technology, 2016, 113(1). [56] 李娜, 陆勤阳, 王永强, 等. Ce对 2.9%Si-0.8%Al无取向硅钢夹杂物变质的影响[J]. 钢铁研究学报, 2017, 29(7): 570. (LI Na, LU Qin-yang, WANG Yong-qiang, et al. Effect of Ce on inclusions modification in 2.9%Si-%Al non-oriented electrical steel[J]. Journal of Iron and Steel Research, 2017, 29(7): 570.) [57] 孙明双, 李涛, 范静. 稀土对无取向硅钢组织与夹杂物的影响[J]. 内蒙古科技大学学报, 2018, 37(4): 349. (SUN Ming-shuang, LI Tao, FAN Jing. Effect of rare earth on micro-structure and inclusion of non-oriented silicon steel[J]. Journal of Mongolia University of Science and Technology, 2018, 37(4): 349.) [58] 李娜, 代威, 王永强, 等.铈对2.9%Si-0.8%Al无取向硅钢再结晶组织和织构的影响[J]. 钢铁, 2018, 53(10): 67. (LI Na, DAI Wei,WANG Yong-qiang, et al. Effect of Ce on recrystallization microstructure and texture in a 2.9%Si-0.8%Al non-oriented silicon steel[J]. Iron and Steel, 2018, 53(10): 67.) [59] 李娜, 王永强, 代威, 等. Ce对2.9%Si-0.8%Al无取向硅钢退火组织及腐蚀性能的影响[J]. 钢铁研究学报, 2019, 29(7): 570. (LI Na, WANG Yong-qiang, DAI Wei, et al. Effect of Ce on microstructure and corrosion resistance of annealed 2.9%Si-0.8%Al non-oriented steel[J]. Journal of Iron and Steel Research, 2019, 29(7): 570.) [60] 段承轶, 刘朋成, 黄利, 等. 稀土Ce对1.5%Si无取向硅钢织构和磁性能的影响[J]. 包钢科技, 2019, 45(6): 47. (DUAN Cheng-yi, LIU Peng-cheng, HUANG Li, et al. Effects of rare earth Ce on texture and magnetic properties of non-oriented electrical steel with 1.5%Si[J]. Science and Technology of Baotou Steel, 2019, 45(6): 47.) [61] 张文博, 樊立峰, 陆斌, 等. 稀土La在包钢CSP无取向电工钢中的应用研究[J]. 包钢科技, 2019, 45(6): 85. (ZHANG Wen-bo, FAN Li-feng, LU Bin, et al. Application research on rare earth La in CSP non-oriented electrical steel of Baotou Steel[J]. Science and Technology of Baotou Steel, 2019, 45(6): 85.) [62] HE Zheng-hua, SHA Yu-hui, GAO Yong-kuang, et al. Recrystallization texture development in rare-earth (RE)-doped non-oriented silicon steel[J]. Journal of Iron and Steel Research, International, 2020, 27(11): 1339. [63] 周情耀, 秦镜, 赵海斌, 等. 钇对冷轧高硅钢薄板组织、织构及磁性能的影响[J]. 电工钢, 2020, 2(3): 9. (ZHOU Qing-yao, QIN Jing, ZHAO Hai-bin, et al. Effects of rare earth yttrium on microstructure, texture and magnetic propertiesof cold rolled high silicon steel sheets[J]. Electrical Steel, 2020, 2(3): 9.) [64] REN Qiang, ZHANG Li-feng, HU Zhi-yuan, et al. Transient influence of cerium on inclusions in an Al-killed non-oriented electrical steel[J]. Ironmaking and Steelmaking, 2020, 48(2): 191. [65] 赵海斌, 秦镜, 张迎晖, 等. 稀土钇对4.5%Si无取向硅钢成品板组织和磁性能的影响[J]. 电工钢, 2021, 3(4): 23. (ZHAO Hai-bin, QIN Jing, ZHANG Ying-hui, et al. Effect of rare earth Y on microstructure and magnetic properties of 4.5%Si non-oriented silicon steel sheets[J]. Electrical Steel, 2021, 3(4): 23.) [66] LUO Yan, ZHANG Li-feng, YANG Wen, et al. Precipitation of nitrides in non-oriented silicon steel[J]. Ironmaking and Steelmaking, 2017, 46(4): 359. [67] Taisei Nakayama, Noriyuki Honjou, Takashi Minaga, et al. Effects of manganese and sulfur contents and slab reheating temperatures on the magnetic properties of non-oriented semi-processed electrical steel sheet[J]. Journal of Magnetism and Magnetic Materials, 2001, 234(1): 55. [68] 张欣, 金自力, 任慧平, 等. 稀土Ce对含Cu低温取向硅钢铸态析出物的影响[J]. 金属热处理, 2020, 45(10): 135. (ZHANG Xin, JIN Zi-li, REN Hui-ping, et al. Effect of rare earth Ce on as-cast precipitates of Cu-containing low-temperature grain-oriented silicon steel[J]. Heat Treatment of Metals, 2020, 45(10): 135.) [69] LI Hao-ze, LIU Hai-tao, LIU Zhen-yu, et al. Microstructure, texture evolution and magnetic properties of strip-casting non-oriented 6.5wt.%Si electrical steel doped with cerium[J]. Materials Characterization, 2015, 103: 101. [70] 刘献东, 王波, 朱简如, 等. 宝钢无取向电工钢发展历程及生产技术进步[J]. 电工材料, 2014(5): 41. (LIU Xian-dong, WANG Bo, ZHU Jian-ru, et al. Development history and technological progress of non-oriented electrical steel sheets at Baosteel[J]. Electrical Engineering Materials, 2014(5): 41). [71] 新日鐵住金株式会社. 磁氖特性に優れた無方向性電磁鋼板の製造方法および無方向性電磁鋼板製造用の鋳造鋼帶の製造方法:日本, JP5423616B2[P]. 2014-02-19. [72] 毛荣松. 无取向3%Si钢中加稀土的研究[J]. 钢铁研究, 1985, 37(4): 7. (MAO Rong-song. Study on the addition of rare earth into 3%Si non-oriented silicon steel[J]. Research on Iron and Steel, 1985, 37(4): 7.) [73] 赵成林. 稀土元素在钢水中的作用机理及加入技术研究[J]. 鞍钢技术, 2017(1): 20. (ZHAO Cheng-lin. Research on mechanism of action of rare earth element and process of adding it in molten steel[J]. Angang Technology, 2017(1):20.) [74] 村上建一, 诸星隆, 熊野知二, 等. 加工性能极好的低铁损的非取向电工钢薄板及其制备方法: 中国, CN1119426C [P]. 2003-08-27. (Murakami Kenichi, Morohoshi Takashi, Kumanu Tomoji, et al. Low Iron Loss Non-Oriented Electrical Steel Sheet Excellent in Workability and Method for Producing the Same: China, CN1119426C[P]. 2003-08-27.) [75] 光红兵, 张文康, 辛宪诚, 等. 稀土对冷轧无取向电工钢成品组织和磁性能的影响[J]. 特殊钢, 2012, 33(2): 58. (GUANG Hong-bin, ZHANG Wen-kang, XIN Xian-cheng, et al. Effect of rare earth element on structure and magnetic performance of cold rolled non-oriented electrical steel products[J]. Special Steel, 2012, 33(2): 58.) [76] 樊立峰, 朱蓉, 郭峰. 新能源汽车用无取向电工钢及其制造方法: 中国, CN108504926A[P]. 2018-09-07. (FAN Li-feng, ZHU Rong, GUO Feng. Non-oriented Electrical Steel for New Energy Vehicle and Manufacture Method: China, CN108504926A[P]. 2018-09-07.) [77] 冯大军, 石文敏, 陈圣林, 等. 用于直驱型风力发电机的无取向硅钢的制备方法: 中国, CN109097687A[P]. 2018-12-28. (FENG Da-jun, SHI Wen-min, CHEN Sheng-lin, et al. Preparation Method of Non-Oriented Silicon Steel for Direct Drive Wind Turbine: China, CN109097687A[P]. 2018-12-28.) [78] 储双杰, 张峰, 王志成, 等. 一种极低铁损的无取向电工钢板及其连续退火工艺: 中国, CN112143964A[P]. 2020-12-29. (CHU Shuang-jie, ZHANG Feng, WANG Zhi-cheng, et al. Non-oriented Electrical Steel Plate with Extremely-Low Iron Loss and Continuous Annealing Process of Non-Oriented Electrical Steel Plate: China, CN112143964A[P]. 2020-12-29.) [79] 原田晃史, 松井章敏, 尾田善彦, 等. 無方向性電磁鋼板及びその素材となるスラプ躋片の製造方法: 日本, JPWO2020071048A1[P]. 2020-04-09.