GUO Jun1,2,3, CHU Man-sheng4, TANG Jue1,2,3, LI Feng1,2,3, LIU Zheng-gen1,2,3, BAO Ji-wei1,2,3
1. School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China;
2. Institute for Frontier Technologies of Low-carbon Steelmaking, Northeastern University, Shenyang 110819, Liaoning, China;
3. Liaoning Province Engineering Research Center for Technologies of Low-carbon Steelmaking, Shenyang 110819, Liaoning, China;
4. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, Liaoning, China
Abstract:China′s iron and steel production is mainly based on the long process of BF-BOF with high energy consumption and high emission, which has great pressure on energy conservation and emission reduction. Therefore, it is particularly important to actively develop blast furnace low-carbon ironmaking technology and promote CO2 emission reduction in blast furnace process. Iron coke is a new type of carbon-iron composite burden after coking or carbonization by adding iron-containing raw materials into suitable coal. Its high reactivity can significantly reduce the temperature in the heat reserve area and then reduce carbon consumption. Using proper iron coke in blast furnace can realize energy saving and carbon reduction to a certain extent. Based on the field production data, the model of iron coke used in blast furnace was established by the theory of exergy analysis, and the influence of iron coke addition on material consumption and energy utilization efficiency of blast furnace was explored. The results show that after using of iron coke in blast furnace, indirect reduction in blast furnace is developed, carbon utilization rate is improved, ash content in blast furnace is reduced, and carbon consumption per unit pig iron and slag amount are reduced. Compared with no iron coke, carbon consumption per ton iron and slag amount are reduced by 25.95 kg and 11.28 kg respectively after using 114 kg/t iron coke in blast furnace. In addition, the metallic iron in iron coke only needs to be melted, which saves the exergy amount required for reduction, and the exergy amount brought by coke and blast will be significantly reduced, so the total exergy amount consumed per ton of iron in blast furnace smelting will be reduced, at the same time, the heat transfer in the furnace will be improved, and the internal exergy loss will be effectively reduced. Compared with no iron coke, after using 114 kg iron coke in blast furnace, the target exergy efficiency increases from 46.14% to 48.87%, and the thermodynamic perfection increases from 87.46% to 88.02%. Under these conditions, the internal exergy loss per ton of iron in blast furnace is reduced by 192.63 MJ, and energy saving is achieved by 6.57 kg.
郭俊, 储满生, 唐珏, 李峰, 柳政根, 鲍继伟. 高炉使用铁焦的㶲分析[J]. 钢铁, 2022, 57(8): 30-38.
GUO Jun, CHU Man-sheng, TANG Jue, LI Feng, LIU Zheng-gen, BAO Ji-wei. Exergy analysis of blast furnace using iron coke[J]. Iron and Steel, 2022, 57(8): 30-38.
[1] 上官方钦,刘正东,殷瑞钰. 钢铁行业“碳达峰”“碳中和”实施路径研究[J]. 中国冶金,2021,31(9):15. (SHANGGUAN Fang-qin,LIU Zheng-dong,YIN Rui-yu. Study on implementation path of “carbon peak” and “carbon neutrality” in steel industry in China[J]. China Metallurgy,2021,31(9):15.)
[2] 张龙强,陈剑. 钢铁工业实现“碳达峰”探讨及减碳建议[J]. 中国冶金,2021,31(9):21. (ZHANG Long-qiang,CHEN Jian. Discussion on achieving “carbon peak” and suggestions for reducing carbon in iron and steel industry[J]. China Metallurgy,2021,31(9):21.)
[3] 苍大强. 钢铁工业“碳达峰”“碳中和”及低碳技术的误区及现实路径[J]. 中国冶金,2021,31(9):3. (CANG Da-qiang. Misunderstandings and realistic path of "carbon peak" "carbon neutrality" and low carbon technologies in iron and steel industry[J]. China Metallurgy,2021,31(9):3.)
[4] 赵紫薇,孔福林,童莉葛,等. 基于“3060”目标的中国钢铁行业二氧化碳减排路径与潜力分析[J]. 钢铁,2022,57(2):162. (ZHAO Zi-wei,KONG Fu-lin,TONG Li-ge,et al. Analysis of CO2 emission reduction path and potential of China′s steel industry under the "3060" target[J]. Iron and Steel,2022,57(2):162.)
[5] 王海风,郦秀萍,周继程,等.钢铁工业节能技术发展现状及趋势[J].冶金能源,2018,37(4):3. (WANG Hai-feng, LI Xiu-ping, ZHOU Ji-cheng,et al.Status and development trend of energy saving technology of chinese steel industry[J]. Energy for Metallurgical Industry,2018,37(4):3.)
[6] 张琦,沈佳林,许立松. 中国钢铁行业碳达峰及低碳转型路径[J]. 钢铁,2021,56(10):152. (ZHANG Qi,SHEN Jia-lin,XU Li-song. Carbon peak and low-carbon transition path of China's iron and steel industry[J]. Iron and Steel,2021,56(10):152.)
[7] 王新东,郝良元. 现代炼铁工艺及低碳发展方向分析[J]. 中国冶金,2021,31(5):1. (WANG Xin-dong,HAO Liang-yuan. Analysis of modern ironmaking technology and low-carbon development direction[J]. China Metallurgy,2021,31(5):1.)
[8] 张琦,张薇,王玉洁,等. 中国钢铁工业节能减排潜力及能效提升途径[J]. 钢铁,2019,54(2):7. (ZHANG Qi,ZHANG Wei,WANG Yu-jie,et al. Potential of energy saving and emission reduction and energy efficiency improvement of China′s steel industry[J]. Iron and Steel,2019,54(2):7.)
[9] 李峰,储满生,唐珏,等. 氢气气基竖炉-电炉短流程环境影响分析[J]. 中国冶金,2021,31(9):104. (LI Feng,CHU Man-sheng,TANG Jue,et al. Environmental impact analysis of hydrogen shaft furnace-electric furnace process[J]. China Metallurgy,2021,31(9):104.)
[10] 聂海亮. 关于推进钢铁行业绿色高质量发展的建议[J]. 中国能源,2021,43(1):39. (NIE Hai-liang. Suggestions on promoting the green and high-quality development of the steel industry[J]. Energy of China,2021,43(1):39.)
[11] 高建军,齐渊洪,严定鎏,等. 中国低碳炼铁技术的发展路径与关键技术问题[J]. 中国冶金,2021,31(9):64. (GAO Jian-jun,QI Yuan-hong,YAN Ding-liu,et al. Development path and key technical problems of low carbon ironmaking in China[J]. China Metallurgy,2021,31(9):64.)
[12] 王宏涛,储满生,应自伟,等. 铁焦新型碳铁复合炉料研发现状[J]. 烧结球团,2017,42(4):44. (WANG Hong-tao,CHU Man-sheng,Ying Zi-wei,et al. Current status on ferro coke technology development[J]. Sintering and Pelletizing,2017,42(4):44.)
[13] 储满生,赵伟,柳政根,等. 高炉使用含碳复合炉料的原理[J]. 钢铁,2015,50(3):9. (CHU Man-sheng,ZHAO Wei,LIU Zheng-gen,et al. Principle on using carbon iron composite as blast furnace burden[J]. Iron and Steel,2015,50(3):9.)
[14] 张华,徐润生,温玉光,等.粘结剂种类对铁焦强度和气化反应性的影响研究[J].冶金能源,2020,39(6):8. (ZHANG Hua,XU Run-sheng,WEN Yu-guang,et al. Effect of binders on strength and gasification reactivity of ferro-coke[J]. Energy for Metallurgical Industry,2020,39(6):8.)
[15] Naito M,Okamoto A,Yamaguchi K,et al.Improvement of blast furnace reaction efficiency by use of high reactivity coke[J]. Tetsu-to-Hagané,2001,87(5):357.
[16] Takeda K,Sato H,Anyashiki T,et al. Pilot plant scale development of an innovation ironmaking process for usage of low graded raw materials and CO2 mitigation[C]//Proceedings of the 6th International Congress on the Science and Technology of Ironmaking. Rio de Janeiro: Associacao Brasileira de Metalurgia Materiais e Mineracao,2012:710.
[17] WANG H T,ZHAO W,CHU M S,et al. Current status and development trends of innovative blast furnace ironmaking technologies amied to environmental harmony and operation intellectualization[J]. Journal of Iron and Steel Research, International,2017,24(8):751.
[18] 邱淑兴. 铁焦的制备基础及其结构与性能表征[D]. 重庆:重庆大学,2019. (QIU Shu-xing. The Basic Theory on the Preparation of Iron Coke and Characterization of its Structure and Property[D]. Chongqing: Chongqing University,2019.)
[19] 鲍继伟,储满生,柳政根,等. 铁焦制备与高炉应用的研究进展[J]. 钢铁,2020,55(8):38. (BAO Ji-wei,CHU Man-sheng,LIU Zheng-gen,et al. Research progress on preparation and application of iron coke in blast furnace[J]. Iron and Steel,2020,55(8):38.)
[20] 张建良,郭建,王广伟,等. 配加铁矿粉对铁焦微观结构及性能的影响[J]. 钢铁,2016,51(9):22. (ZHANG Jian-liang,GUO Jian,WANG Guang-wei,et al. Effect of iron fines addition on microstructure and properties of iron-coke[J]. Iron and Steel,2016,51(9):22.)
[21] 史世庄,董晴雯,毕学工,等. 炼焦工艺条件对铁焦性能影响的试验[J]. 钢铁,2015,50(4):8. (SHI Shi-zhuang,DONG Qing-wen,BI Xue-gong,et al. Experiment of coking process conditions on iron-coke properties[J]. Iron and Steel,2015,50(4):8.)
[22] 史世庄,林志龙,毕学工,等. 炼焦煤性质对铁焦性能影响的试验研究[J]. 太原理工大学学报,2015,46(3):283. (SHI Shi-zhuang,LIN Zhi-long,BI Xue-gong,et al. Experimental research of effect of coking coal quality on iron coke performance[J]. Journal of Taiyuan University of Technology,2015,46(3):283.)
[23] 王宏涛,储满生,赵伟,等. 工艺参数对热压铁焦抗压强度的影响[J]. 东北大学学报(自然科学版),2016,37(6):810. (WANG Hong-tao,CHU Man-sheng,ZHAO Wei,et al. Effect of process parameters on the compressive strength of iron coke hot briquette[J]. Journal of Northeastern University(Natural Science),2016,37(6):810.)
[24] WANG H T,ZHAO W,CHU M S,et al. Effects of coal and iron ore blending on metallurgical properties of iron coke hot briquette[J]. Powder Technology,2018,328:318.
[25] 任华伟,储满生,吕青青,等. 铁矿粉对铁焦性能的影响及机理[J]. 钢铁,2018,53(8):21. (REN Hua-wei,CHU Man-sheng,LÜ Qing-qing,et al. Mechanism and influence on iron-coke property by iron ore powder[J]. Iron and Steel,2018,53(8):21.)
[26] 鲍继伟,储满生,王宏涛,等. 铁焦高温冶金性能评价方法的研究进展[J]. 钢铁研究学报,2021,33(10):1064. (BAO Ji-wei,CHU Man-sheng,WANG Hong-tao,et al. Research progress of evaluation methods for high temperature metallurgical properties of iron coke[J]. Journal of Iron and Steel Research,2021,33(10):1064.)
[27] 程向明, 毕学工, 史世庄, 等. 铁焦与铁矿石混装对高炉初渣形成的影响[J]. 钢铁,2014,49(8):9. (CHENG Xiang-ming,BI Xue-gong,SHI Shi-zhuang,et al. Effect of ferro-coke and iron ores mixing charging on primary slag formation in blast furnace[J]. Iron and Steel,2014,49(8):9.)
[28] 毕学工,马毅瑞,李鹏,等. 混装铁焦对人造富矿还原行为的影响[J]. 钢铁,2014,49(11):9. (BI Xue-gong,MA Yi-rui,LI Peng,et al. Effect of iron coke mixed charging on agglomerates reduction behavior[J]. Iron and Steel,2014,49(11):9.)
[29] 王宏涛,储满生,赵伟,等. 热压铁焦对高炉综合炉料熔滴性能的影响[J]. 东北大学学报(自然科学版),2016,37(8):1108. (WANG Hong-tao,CHU Man-sheng,ZHAO Wei,et al. Effect of iron coke hot briquette on softening-melting and dripping properties of blast furnace mixed burden[J]. Journal of Northeastern University(Natural Science),2016,37(8):1108.)
[30] 李鹏. 高反应性铁焦的性能及其在高炉中应用的基础研究[D]. 武汉:武汉科技大学,2016. (LI Peng. Fundamental Research on Properties of Highly Reactive Ferro-coke and Its Application in Blast Furnace[D]. Wuhan: Wuhan University of Science and Technology,2016.)
[31] 吴复忠,蔡九菊,张琦,等. 炼铁系统的物质流和能量流的㶲分析[J]. 工业加热,2007(1):15. (WU Fu-zhong,CAI Jiu-ju,ZHANG Qi,et al. Exergy analysis of energy and materials flows in the system of ironmaking plants[J]. Industrial Heating,2007(1):15.)
[32] HE Cheng-chi,HE Yan-hui,FENG Dai-li,et al. Exergy analysis and optimization of sintering process[J]. Steel Research International,2018,89,1800065.
[33] LIU Xiong,CHEN Lin-gen,QIN Xiao-yong,et al. Exergy loss minimization for a blast furnace with comparative analyses for energy flows and exergy flows[J]. Energy,2015,93:10.
[34] Tomohiro Akiyama,Jun-ichiro Yagi. Exergy analysis of conventional ironmaking,direct reduction-electric furnace and smelting reduction systems[J].Tersu-to-Hagane,1998,74(12):2270.
[35] Ma′rcio M C,Roberto S,Ernst W. Exergy accounting of energy and materials flows in steel production systems[J]. Energy,2001,26:363.
[36] ZHANG Qi,XU Jin,ZHAO Xiao-yu,et al. Energy and exergy analyses of an integrated iron and steel making process[J]. International Journal of Exergy,2018,26(4):454.
[37] SUN Jing-chao,NA Hong-ming,YAN Tian-yi,et al. A comprehensive assessment on material,exergy and emission networks for the integrated iron and steel industry[J]. Energy,2021,235:121429.
[38] 李淑英.独立焦化企业能耗现状与节能潜力分析[J].冶金能源,2020,39(4):42.(LI Shu-ying, Energy consumption status and energy saving potential analysis of independent coking enterprises[J]. Energy for Metallurgical Industry, 2020,39(4):42.)
[39] Önder Kaşka. Energy and exergy analysis of an organic Rankine for power generation from waste heat recovery in steel industry[J]. Energy Conversion and Management,2014,77(1):108.
[40] 周传典. 高炉炼铁生产技术手册[M]. 北京:冶金工业出版社,2002. (ZHOU Chuan-dian. Technical Manual of Blast Furnace Ironmaking[M]. Beijing:Metallurgical Industry Press,2002.)