Analysis on resource utilization of spent V2O5-WO3/TiO2 catalyst produced in sintering flue gas
LONG Hong-ming1,2, DING Long1, TAO Jia-jie1, QIAN Li-xin1
1. School of Metallurgical Engineering, Anhui University of Technology, Ma'anshan 243002, Anhui, China; 2. Anhui Province Key Laboratory of Metallurgy Engineering and Resources Recycling, Ma'anshan 243002, Anhui, China
Abstract:In 2019, the "Proposal on promoting the implementation of ultra-low emissions in the steel industry" was presented by Chinese government, aiming to convert more than 80% of China's iron and steel capacity enterprises into ultra-low emission transformation by the end of 2025. Currently, NOx emission reduction from sinter flue gas has become the focus. Selective catalytic reduction with ammonia (NH3-SCR) based on vanadium-tungsten-titanium catalyst has become one of the mainstream technologies for sinter flue gas denitrification and has been widely used in iron and steel enterprises. However, as the catalysts reach the end of their life, spent catalysts are increasing year by year. It is estimated that the spent catalysts produced by sinter flue gas denitrification will reach 100 000 m3 per year in 2027 in China. Vanadium-tungsten-titanium spent catalysts contain V2O5, which have strong biological toxicity and have been classified as "HW50" hazardous waste in the new National Hazardous Waste List. With the increasingly stringent environmental requirements, the effective disposal of spent catalysts has become a key common problem that needs to be solved in iron and steel industry. The current status of spent catalyst disposal was summarized in terms of disposal concepts and technical methods. The main treatment methods include valuable element extraction, spent catalyst recycling and harmless disposal. The corresponding technical approaches of valuable element extraction include leaching, extraction, precipitation, hydrothermal synthesis and carbon thermal reduction. Spent catalyst recycling includes the mixing of spent catalysts to make new catalysts. Harmless disposal includes solidification/stabilization before landfill disposal. Based on the new development concept of "solid waste does not leave the factory" in iron and steel enterprises, the research ideas related to the resource utilization of spent catalysts as a titanium resource in the steel production process are analyzed. Finally, the prospect of efficient and clean utilization of spent catalysts in iron and steel enterprises is presented.
龙红明, 丁龙, 陶家杰, 钱立新. 烧结烟气脱硝废弃钒钨钛催化剂资源化利用途径分析[J]. 钢铁, 2022, 57(7): 162-178.
LONG Hong-ming, DING Long, TAO Jia-jie, QIAN Li-xin. Analysis on resource utilization of spent V2O5-WO3/TiO2 catalyst produced in sintering flue gas[J]. Iron and Steel, 2022, 57(7): 162-178.
[1] YU Z Y, FAN X H, GAN M, et al. Effect of Ca-Fe oxides additives on NOx reduction in iron ore sintering[J]. J Iron Steel Res Int, 2017, 24(12): 1184. [2] 于勇, 朱廷钰, 刘霄龙. 中国钢铁行业重点工序烟气超低排放技术进展[J]. 钢铁, 2019, 54(9): 1.(YU Yong, ZHU Ting-yu, LIU Xiao-long. Progress of ultra-low emission technology for key processes of iron and steel industry in China[J]. Iron and Steel, 2019, 54(9): 1.) [3] LI X, BEI N F, HU B, et al. Mitigating NOx emissions does not help alleviate wintertime particulate pollution in Beijing-Tianjin-Hebei, China[J]. Environmental Pollution, 2021, 279: 116931. [4] ZHANG J, LI X C, CHEN P G, et al. Research status and prospect on vanadium-based catalysts for NH3-SCR denitration[J]. Materials, 2018, 11(9): 1632. [5] Usberti N, Gramigni F, Nasello N D, et al. An experimental and modelling study of the reactivity of adsorbed NH3 in the low temperature NH3-SCR reduction half-cycle over a Cu-CHA catalyst[J]. Appl Catal B-Environ, 2020, 279:119397. [6] 汤常金, 孙敬方, 董林. 超低温 (<150 ℃) SCR 脱硝技术研究进展[J]. 化工学报, 2020, 71(11): 4873.(TANG Chang-jin, SUN Jing-fang, DONG Lin. Recent progress on elimination of NOx from flue gas via SCR technology under ultra-low temperatures(<150 ℃) [J]. CIESC Journal, 2020, 71(11): 4873.) [7] Janssen F, Meijer R. Quality control of deNOx catalysts: Performance testing, surface analysis and characterization of deNOx catalysts[J]. Catal Today, 1993, 16(2): 157. [8] 郭江源, 张志勇, 郝素华. 火电厂机组负荷调整对 SCR 脱硝效果的影响分析[J]. 环境保护科学, 2020, 46(3): 80.(GUO Jiang-yuan, ZHANG Zhi-yong, HAO Su-hua. Analysis of the influence of power unit load adjustment on SCR denitration for power plant[J]. Environmental Protection Science, 2020, 46(3): 80.) [9] 郦建国, 朱法华, 孙雪丽. 中国火电大气污染防治现状及挑战[J]. 中国电力, 2018, 51(6): 2.(LI Jian-guo, ZHU Fa-hua, SUN Xue-li. Current status and challenges of atmospheric pollution prevention and control of thermal power plants in China[J]. Electric Power, 2018, 51(6): 2.) [10] 李博, 王卫良, 姚宣, 等. 煤电减排对中国大气污染物排放控制的影响研究[J]. 中国电力, 2019, 52(1): 110.(LI Bo, WANG Wei-liang, YAO Xuan, et al. Study on the effects of emission reduction in coal-fired power industry on China's air pollutant emission control[J]. Electric Power, 2019, 52(1): 110.) [11] 龙红明, 丁龙, 钱立新, 等.烧结烟气中NOx和二噁英的减排现状及发展趋势[J].化工进展. DOI:10.16085/j.issn.1000-6613.2021-1650.(LONG Hong-ming, DING Long, QIAN Li-xin, et al. Current situation and development trend of NOx and dioxins emission reduction in sintering flue gas[J]. Chemical Industry and Engineering Progress. DOI:10.16085/j.issn.1000-6613.2021-1650.) [12] 赵利明,陈海波. SCR烟气脱硝技术在宝钢股份4#烧结机的应用[J]. 烧结球团, 2018, 43(6): 24.(ZHAO Li-ming, CHEN Hai-bo. Application of SCR flue gas denitrification technology in No.4 sinter machine of Baosteel Co., Ltd[J]. Sintering and Pelletizing, 2018, 43(6): 24.) [13] 孙东, 梁春明. 烧结烟气SCR脱硝技术的应用实践[J]. 山东冶金, 2020, 42(3): 52.(SUN Dong, LIANG Chun-ming. Application of SCR denitration technology for sintered flue gas[J]. Shandong Metallurgy, 2020, 42(3): 52.) [14] 钱立新,杨涛,龙红明,等.烧结烟气V2O5-WO3/TiO2催化剂失活及再生[J].烧结球团,2020,45(4):71. (QIAN Li-xin, YANG Tao, LONG Hong-ming, et al. Deactivation and regeneration of V2O5-WO3/TiO2catalysts in the sintering flue gas[J]. Sintering and Pelletizing, 2020,45(4):71.) [15] 田迎春, 彭永丽, 殷翼云, 等. 蜂窝式 VPO 低温脱硝催化剂浸渍法成型实验研究[J]. 安徽工业大学学报 (自然科学版),2021, 38(3): 275.(TIAN Ying-chun, PENG Yong-li, YIN Yi-yun, et al. Experimental study of immersion method of honeycomb VPO low temperature denitration catalyst[J]. Journal of Anhui University of Technology(Natural Science), 2021, 38(3): 275.) [16] 钱立新, 丁龙, 龙红明, 等. 碱中毒对烧结烟气SCR催化剂脱硝脱二噁英的影响[J]. 钢铁研究学报, 2020, 32(7): 542. (QIAN Li-xin, DING Long, LONG Hong-ming, et al. Effect of alkali poisoning on simultaneous removal NO and dioxins over SCR catalysts for sintering flue gas[J]. Journal of Iron and Steel Research. 2020, 32(7): 542.) [17] 王春霞. 载体TiO2对脱硝催化剂性能的影响和催化剂失活与再生研究[D]. 杭州: 浙江大学, 2013.(WANG Chun-xia. The Influence of TiO2-supports on the Catalytic Properties of Catalyst for de-NO, and the Study on Deactivation and Regeneration of the Catalyst[D]. Hangzhou: Zhejiang University, 2013.) [18] 沈艳梅, 魏书洲, 崔智勇. 造成SCR脱硝催化剂失活的关键物质及预防[J]. 中国电力, 2016, 49(4): 1.(SHENG Yan-mei, WEI Shu-zhou, CUI Zhi-yong. The key substances causing SCR denitration catalyst deactivation and the preventive measures[J]. Electric Power, 2016, 49(4): 1.) [19] Klimczak M, Kern P, Heinzelmann T, et al. High-throughput study of the effects of inorganic additives and poisons on NH3-SCR catalysts-Part I: V2O5-WO3/TiO2 catalysts[J]. Appl Catal B-Environ, 2010, 95(1/2): 39. [20] Tokarz M, Jrars S, Persson B. Poisoning of de-NOx SCR catalyst by flue gases from a waste incineration plant[J]. Studies in Surface Science and Catalysis, 1991, 68: 523. [21] KONG M, LIU Q, ZHOU J, et al. Effect of different potassium species on the deactivation of V2O5-WO3/TiO2 SCR catalyst: Comparison of K2SO4, KCl and K2O[J]. Chem Eng J, 2018, 348: 637. [22] 丁龙, 钱立新, 杨涛, 等. 烧结烟气中Zn对V2O5-WO3/TiO2催化剂脱除NOx和二噁英性能的影响[J]. 工程科学学报, 2021, 43(8): 1125. (DING Long, QIAN Li-xin, YANG Tao, et al. Influence of Zn in the iron ore sintering flue gas on the removal of NOx and dioxins by V2O5-WO3/TiO2 catalyst[J]. Chinese Journal of Engineering, 2021, 43(8):1125.) [23] QIAN L X, ZHAO B J, WANG H Y, et al. Valorization of the spent catalyst from flue gas denitrogenation by improving bio-oil production from hydrothermal liquefaction of pinewood sawdust[J]. Fuel, 2022, 312, 122804. [24] Kim J W, Lee W G, Hwang I S, et al. Recovery of tungsten from spent selective catalytic reduction catalysts by pressure leaching[J]. J Ind Eng Chem, 2015, 28: 73. [25] Erust C, Akcil A, Bedelova Z, et al. Recovery of vanadium from spent catalysts of sulfuric acid plant by using inorganic and organic acids: laboratory and semi-pilot tests[J]. Waste Manage, 2016, 49: 455. [26] 闫巍, 余智勇, 张畅, 等. 废弃SCR催化剂中钒和钨的浸出及回收[J]. 化工环保, 2018, 38(4): 471.(YAN Wei, YU Zhi-yong, ZHANG Chang, et al. Leaching and recovery of vanadium and tungsten from spent SCR catalyst[J]. Environmental Protection of Chemical Industry, 2018, 38(4): 471.) [27] ZHOU H, MA P N, LAI Z Y, et al. Harmless treatment of waste selective catalytic reduction catalysts during iron ore sintering process[J]. J Clean Prod, 2020, 275: 122954. [28] Navarro-Blasco I, Duran A, Sirera R, et al. Solidification/stabilization of toxic metals in calcium aluminate cement matrices[J]. J Hazard Mater, 2013, 260: 89. [29] CHEN J P, YANG R T. Role of WO3 in mixed V2O5-WO3/TiO2catalysts for selective catalytic reduction of nitric oxide with ammonia[J]. Appl Catal A—Gen, 1992, 80(1): 135. [30] ZHANG Q J, WU Y F, YUAN H R. Recycling strategies of spent V2O5-WO3/TiO2 catalyst: A review[J]. Resour Conserv Recy, 2020, 161: 104983. [31] Choi I, Moon G, Lee J, et al. Hydrometallurgical processing of spent selective catalytic reduction (SCR) catalyst for recovery of tungsten[J]. Hydrometallurgy, 2018, 178: 137. [32] Lee J Y, Lee H I. Method for Leaching Precious Metals Contained in Waste Denitrification Catalyst Using Pressure Leaching Process: US, 10913989[P]. [2021-02-09]. [33] LI Q C, LIU Z Y, LIU Q Y. Kinetics of vanadium leaching from a spent industrial V2O5/TiO2 catalyst by sulfuric acid[J]. Ind Eng Chem Res, 2014, 53(8): 2956. [34] Kim J W, Hwang I. Separation of valuables from spent selective catalytic reduction catalyst leaching solution by fabricated anion extraction resins[J]. J Environ Chem Eng, 2018, 6(1): 1100. [35] Park K H, Reddy B R, Mohapatra D, et al. Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst[J]. Int J Miner process, 2006, 80(2/3/4): 261. [36] SU Q F, MIAO J F, LI H R, et al. Optimizing vanadium and tungsten leaching with lowered silicon from spent SCR catalyst by pre-mixing treatment[J]. Hydrometallurgy, 2018, 181: 230. [37] LI W, MA C, GONG W H, et al. Clean production technology for effective recovery of vanadium from shale: Interaction between activators and vanadium-loaded minerals[J]. J Clean Prod, 2021, 315: 128170. [38] Mazurek K. Recovery of vanadium, potassium and iron from a spent vanadium catalyst by oxalic acid solution leaching, precipitation and ion exchange processes[J]. Hydrometallurgy, 2013, 134: 26. [39] Park K, Kim H, Parhi P K. Recovery of molybdenum from spent catalyst leach solutions by solvent extraction with LIX 84-I[J]. Sep Purif Technol, 2010, 74(3): 294. [40] Heo S, Jeon J, Kim R, et al. Separation of vanadium and tungsten from spent SCR deNOx catalyst by ion-exchange column[J]. Resources Recycling, 2021, 30(4): 54. [41] 陈广玉, 康嘉龙, 刘俊杰, 等. 废弃脱硝催化剂直接合金化研究[J]. 钢铁钒钛, 2018, 6: 99.(CHEN Guang-yu, KANG Jia-long, LIU Jun-jie, et al. Study on direct alloying of waste SCR catalysts[J]. Iron Steel Vanadium Titanium, 2018, 6: 99.) [42] CAO Y J, YUAN J F, DU H, et al. A clean and efficient approach for recovery of vanadium and tungsten from spent SCR catalyst[J]. Miner Eng, 2021, 165: 106857. [43] Gummow B. Vanadium: Environmental Pollution and Health Effects[M]. Amsterdam: Elsevier, 2011. [44] WU W F, WANG C Y, BAO W J, et al. Selective reduction leaching of vanadium and iron by oxalic acid from spent V2O5-WO3/TiO2 catalyst[J]. Hydrometallurgy, 2018, 179: 52. [45] 梁雪梅. 微波与常规加热酸浸废SCR催化剂提钒效果比较[J]. 材料研究与应用, 2017,11(2):97. (LIANG Xue-mei. Comparison of effect of microwave and conventional heating acid leaching waste SCR catalyst on vanadium extraction[J]. Materials Research and Application,2017, 11(2): 97.) [46] YAO J X, CAO Y B, WANG J C, et al. Successive calcination-oxalate acid leaching treatment of spent SCR catalyst: A highly efficient and selective method for recycling tungsten element[J]. Hydrometallurgy, 2021, 201: 105576. [47] Wu W, Tsai T, Shen Y. Tungsten recovery from spent SCR catalyst using alkaline leaching and ion exchange[J]. Minerals, 2016, 6(4): 107. [48] Sola A B C, Parhi P K, Lee J, et al. Environmentally friendly approach to recover vanadium and tungsten from spent SCR catalyst leach liquors using Aliquat 336[J]. RSC Adv, 2020, 10(34): 19736. [49] MA B T, QIU Z F, YANG J, et al. Recovery of nano-TiO2 from spent SCR catalyst by sulfuric acid dissolution and direct precipitation[J]. Waste Biomass Valori, 2019, 10(10):3037. [50] ZHANG Q J, WU Y F, ZUO T Y. Green recovery of titanium and effective regeneration of TiO2 photocatalysts from spent selective catalytic reduction catalysts[J]. ACS Sustain Chem Eng, 2018, 6(3): 3091. [51] BAI X Y, SHANG X J, WAN H L, et al. Sustainable recycling of titanium from TiO2 in spent SCR denitration catalyst via molten salt electrolysis[J]. J Energy Chem, 2021, 58: 557. [52] ZHANG Q J, WU Y F, LI L L, et al. Sustainable approach for spent V2O5-WO3/TiO2 catalysts management: Selective recovery of heavy metal vanadium and production of value-added WO3-TiO2 photocatalysts[J]. ACS Sustain Chem Eng, 2018, 6(9): 12502. [53] CHEN J P, MA L W, CAO M X, et al. Extraction of tungsten and vanadium from the spent SCR catalyst by high pressure alkaline leaching method[J]. Materials Science Forum, 2018, 913: 954. [54] YANG B, ZHOU J B, WANG W W, et al. Extraction and separation of tungsten and vanadium from spent V2O5-WO3/TiO2 SCR catalysts and recovery of TiO2 and sodium titanate nanorods as adsorbent for heavy metal ions[J]. Colloid Surface A, 2020, 601: 124963. [55] Moon G, Kim J H, Lee J, et al. Leaching of spent selective catalytic reduction catalyst using alkaline melting for recovery of titanium, tungsten, and vanadium[J]. Hydrometallurgy, 2019, 189: 105132. [56] LIU X H, YANG Q W. Recovery of vanadium and tungsten from waste selective catalytic reduction catalysts by K2CO3 roasting and water leaching followed by CaCl2 precipitation[J]. International Journal of Coal Science and Technology, 2021, 8(4): 727. [57] 李朴芳, 穆林, 王社斌. 碳热还原/熔融分离废SCR催化剂中有价金属[J]. 无机盐工业, 2020, 52(1): 93.(LI Pu-fang, MU Lin, WANG She-bin. Carbon thermal reduction/melting separation of valuable metals from spent SCR catalysts[J]. Inorganic Chemicals Industry, 2020, 52(1): 93.) [58] JIN Q J, SHEN Y S, CAI Y, et al. Resource utilization of waste V2O5-based deNOx catalysts for hydrogen production from formaldehyde and water via steam reforming[J]. J Hazard Mater, 2020, 381: 120934. [59] QI C P, BAO W J, WANG L G, et al. Study of the V2O5-WO3/TiO2 catalyst synthesized from waste catalyst on selective catalytic reduction of NOx by NH3[J]. Catalysts, 2017,7(4): 110. [60] Ferella F. A review on management and recycling of spent selective catalytic reduction catalysts[J]. J Clean prod, 2020, 246: 118990. [61] 何川, 王乐乐, 杨晓宁, 等. 废弃选择性催化还原催化剂混掺对新催化剂脱硝性能的影响[J]. 化工进展, 2018, 37(2): 581.(HE Chuan, WANG Le-le, YANG Xiao-ning, et al. Effects of spent SCR catalyst blending on the de-NOx activity of new catalyst[J]. Chemical Industry and Engineering Progress,2018, 37(2): 581.) [62] LI M, LIU B, WANG X, et al. A promising approach to recover a spent SCR catalyst: Deactivation by arsenic and alkaline metals and catalyst regeneration[J]. Chem Eng J, 2018, 342: 1. [63] 戚春萍, 武文粉, 王晨晔, 等. 燃煤电厂废旧SCR脱硝催化剂中TiO2载体的回收与再利用[J]. 化工学报, 2017, 68(11): 4239.(QI Chun-ping, WU Wen-fen, WANG Chen-hua, et al. Recycling and reuse of TiO2 carrier from waste SCR catalysts used in coal-fired power plants[J]. CIESC Journal, 2017, 68(11): 4239.) [64] 王乐乐, 杨晓宁, 何川, 等. 燃煤电厂废旧SCR催化剂无害化掺烧试验研究及可行性分析[J]. 华电技术, 2017,39(5):7.(WANG Le-le, YANG Xiao-ning, HE Chuan, et al. Coal-fired power plant waste SCR catalyst harmless blending combustion study and feasibility analysis[J]. Huadian Technology, 2017, 39(5): 7.) [65] 曹礼梅, 王青, 张巍, 等. 典型燃煤电厂废SCR催化剂解析及环境管理思考[J]. 装备环境工程, 2018, 15(2): 45.(CAO Li-mei, WANG Qing, ZHANG Wei, et al. Spent SCR catalysts and environmental management in typical coal-fired power plant[J]. Equipment Environmental Engineering, 2018, 15(2): 45.) [66] Vempati R K, Mollah M Y A, Chinthala A K, et al. Solidification/stabilization of toxic metal wastes using coke and coal combustion by-products[J]. Waste Manage, 1995, 15(5/6): 433. [67] 王登权, 何伟, 王强, 等. 重金属在水泥基材料中的固化和浸出研究进展[J]. 硅酸盐学报, 2018, 46(5): 683.(WANG Den-quan, HE Wei, WANG Qiang, et al. Review on stabilization and leaching of heavy metals in cementitious materials[J]. Journal of the Chinese Ceramic Society, 2018, 46(5): 683.) [68] 张陆文, 金江, 张华. 利用废弃SCR脱硝催化产品制备瓷质砖[J]. 中国陶瓷, 2013(5): 50.(ZHANG Lu-wen, JING Jiang, ZHANG Hua. Preparing dry-pressed porcelain tile by means of abandoned SCR catalysts[J]. China Ceramics, 2013(5): 50.) [69] 周昊, 国旭涛, 周明熙. 不同添加剂对废弃SCR催化剂熔融无害化处理的影响[J]. 动力工程学报, 2017, 37(12): 999.(ZHOU Hao, GUO Xu-tao, ZHOU Ming-xi. Influence of different additives on harmless melting treatment of waste SCR catalysts[J]. Journal of Chinese Society of Power Engineering, 2017, 37(12): 999.) [70] DAI Z J, WANG L L, TANG H, et al. Speciation analysis and leaching behaviors of selected trace elements in spent SCR catalyst[J]. Chemosphere, 2018, 207: 440. [71] LIU L J, WANG L L, SU S, et al. Leaching behavior of vanadium from spent SCR catalyst and its immobilization in cement-based solidification/stabilization with sulfurizing agent[J]. Fuel, 2019, 243: 406. [72] Gougar M, Scheetz B E, Roy D M. Ettringite and C S H Portland cement phases for waste ion immobilization: A review[J]. Waste Manage, 1996, 16(4): 295. [73] Halim C E, Amal R, Beydoun D, et al. Implications of the structure of cementitious wastes containing Pb (II), Cd (II), As (V), and Cr (VI) on the leaching of metals[J]. Cement Concrete Res, 2004, 34(7): 1093. [74] Kundu S, Gupta A K. Immobilization and leaching characteristics of arsenic from cement and/or lime solidified/stabilized spent adsorbent containing arsenic[J]. J Hazard Mater, 2008, 153(1/2): 434. [75] 董子龙, 杨巧文, 贾卓泰, 等. 选择性催化还原脱硝废弃催化剂回收技术研究进展[J]. 化工进展, 2017, 36(增刊1): 449.(DONG Zi-long, YANG Qiao-wen, JIA Zhuo-tai, et al. Research progress on recovery technology of spent selective catalytic reduction denitration catalyst[J]. Chemical Industry and Engineering Progress, 2017, 36(s1): 449.) [76] 刘东辉, 王晓哲, 张建良, 等. 高炉护炉用含钛物料应用现状及调研分析[J]. 中国冶金, 2018, 28(2): 1.(LIU Dong-hui, WANG Xiao-zhe, ZHANG Jian-liang, et al. Application status and investigation of titanium-containing materials in blast furnace protection process[J]. China Metallurgy, 2018, 28(2): 1.) [77] 李想. 钒钛磁铁矿烧结优化配矿研究[D]. 沈阳:东北大学, 2017.(LI Xiang. Investigation on Ore-Proportioning Optimization Technique with Vanadium and Titanium Magnetite Ores in Sintering[D]. Shenyang: Northeastern University,2017.) [78] 胡熊. 高比例钒钛粉烧结技术研究及应用[J]. 重庆科技学院学报(自然科学版), 2021, 23(2): 111.(HU Xiong. Research and application of sintering technology of high proportion vanadium-titanium powder[J]. Journal of Chongqing University of Science and Technology(Natural Sciences), 2021, 23(2): 111.) [79] 姜涛. 烧结球团生产技术手册[M]. 北京: 冶金工业出版社, 2014.(JIANG Tao. Technical Manual of Sintering and Pellet Production[M]. Beijing: Metallurgical Industry Press,2014.) [80] 刘长江, 高培程, 王刚, 等. 首钢股份高钛氧化球团生产实践[J]. 矿业工程, 2020, 18(2): 47.(LIU Chang-jiang, GAO Pei-cheng, WANG Gang, et al. Production practice of high titanium oxidized pellets in Beijing Shougang Co., Ltd[J]. Mining Engineering, 2020, 18(2): 47.) [81] 马永庆, 章晓静, 梁玉芬. Cr-W-Mo-V高合金中高碳钢的显微组织及回火硬度[J]. 金属热处理, 2016, 41(4): 30.(MA Yong-qing, ZHANG Xiao-jing, LIANG Yu-fen. Microstructure and tempering hardness of Cr-W-Mo-V high alloy medium-upper carbon steel[J]. Heat Treatment of Metals, 2016, 41(4): 30.) [82] LUO Z T, CHEN L G, ZHANG M X, et al. Analysis of melting reconstruction treatment and cement solidification on ultra-risk municipal solid waste incinerator fly ash-blast furnace slag mixtures[J]. Environ Sci Pollut R, 2020, 27(25): 32139. [83] 龙红明,丁龙, 杨涛, 等. 一种利用高炉球团生产工序处理失效催化剂的方法:中国, CN113151673A[P].[2021-07-23].(LONG Hong-ming, DING Long, YANG Tao, et al. The Invention Relates to a Method for Treating Invalid Catalyst by Using Blast Furnace Pellet Production Process: China, CN113151673A[P]. [2021-07-23].) [84] LONG H M, ZHANG Y D, YANG T, et al. A promising method to recover spent V2O5-WO3/TiO2 catalyst: Treatment by vanadium-titanium magnetite sintering process[J]. J Iron Steel Res Int, 2021. https://doi.org/10.1007/s42243-021-00676-1. [85] QIAN L X, YANG T, LONG H M, et al. Recycling of waste V2O5-WO3/TiO2 catalysts in the iron ore sintering process via a preballing approach[J]. ACS Sustain Chem Eng, 2021, 9(48): 16373.