Plastic Deformation Analysis of Slab and Improvement of Pressing Schedule on SP
YAO Shijie1,WU Di2,ZHAO Xianming2
1.Heavy Plate Mill, Baoshan Iron and Steel Co., Ltd., Shanghai 201900, China; 2.The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China
Abstract：The buckling and “fish tail” are often occurred in sizing press, which can reduce the metal yield. The metal flow of slab in sizing was analyzed and the buckling and “fish tail” at slab head and end were studied with plastic collapse theory according to the mutual influence of end and deformation zone. On the theoretical basis, the compressing roll gap was increased and buckling was reduced. A new sizing process schedule was applied to modify the sizing process and width reduction accuracy was improved obviously, the cutting loss at strip head and tail end was decreased also.
姚士杰;吴迪;赵宪明. 减宽侧压板坯变形分析和压下规程改进[J]. 钢铁, 2006, 41(6): 0-0.
YAO Shijie;WU Di;ZHAO Xianming. Plastic Deformation Analysis of Slab and Improvement of Pressing Schedule on SP. Iron and Steel, 2006, 41(6): 0-0.
2006, Vol. 41 