Strengthening Mechanism of HotRolled Low Carbon Steel Produced by CSP
SU Shihuai1,HE Yizhu2,ZHU Tao1,LIU Xuewei2,WENG Yuqing3
1. Maanshan Iron and Steel Co．, Ltd．, Maanshan 243000, Anhui, China;2. School of Metallurgy and Materials, Anhui University of Technology, Maanshan 243002, Anhui, China;3. The Chinese Society for Metals， Beijing 100711
Abstract：The effect of microstructure, precipitation of second phase on strength of SPHC produced by CSP (compact strip production) were investigated. The yield strength of SPHC produced both by CSP and by traditional technology were compared. The results show that the calculated yield strength of SPHC produced by CSP is 42 MPa lower than measured, but the measured and calculated yield strength of SPHC produced by traditional technology are the same. The TEM observation shows that there are three kinds of particles which sizes are nanoscale, submicronscale, and microscale in the steel produced by CSP. Precipitating strengthening contributes 40 MPa to the yield strength of SPHC produced by CSP.
苏世怀;何宜柱;朱涛;刘学伟;翁宇庆. CSP热轧低碳钢的强化机制研究[J]. 钢铁, 2006, 41(5): 0-0.
SU Shihuai;HE Yizhu;ZHU Tao;LIU Xuewei;WENG Yuqing. Strengthening Mechanism of HotRolled Low Carbon Steel Produced by CSP. Iron and Steel, 2006, 41(5): 0-0.
2006, Vol. 41 