Numerical Simulation of Scale Formation on Hot Rolled Strip
YU Yang1，2,LI Qingliang1,LIU Zhenyu1
1. The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China；2. No.3 Steelmaking and Continuous Rolling Plant of Ansteel, Anshan 114021, Liaoning, China
Abstract：In order to study the influence of temperature and deformation on scale formation on the strip during rolling, based on the temperature change of hot rolled strips and computer program, the numerical simulation of scale formation was carried out for three steel grades:SPAH，X60 and Q235B. The simulated results were in good agreement with the measured.The simulation method is useful for adjusting rolling parameters to control scale formation.
于洋;李庆亮;刘振宇. 热轧带钢氧化铁皮生长过程数值模拟[J]. 钢铁, 2008, 43(1): 55-0.
YU Yang;LI Qingliang;LIU Zhenyu. Numerical Simulation of Scale Formation on Hot Rolled Strip. Iron and Steel, 2008, 43(1): 55-0.
2008, Vol. 43 
