Effect of Smelting Process on Microstructure and Mechanical Property of H13 Steel
LIU Zhen-tian1,ZHOU Jian2,MA Dang-shen2,QIU Li-peng1,LIU Bao-shi1
1. Dongbei Special Steel Group Co., Ltd., Fushun 113001, Liaoning, China 2. Institute for Structural Materials, Central Iron and Steel Research Institute, Beijing 100081, China
Abstract:Effect of such two different smelting process as “Vacuum Induction Furnace (VIF)+ Electroslag Remelting (ESR), Electric Furnace(EF)+LF+VD” of special steel on microstructure and mechanical property of H13 molds was studied. The results show that the process of VIF+ESR has some effects on increasing of the cleanliness, decrease of S, P and segregation in H13, which can enhance the transversal impact toughness to some extent in the core of H13 steel. The increase of impact toughness is restricted by a large number of primary carbides in microstructure of H13 steel.
刘振天 周健,马党参,秋立鹏 刘宝石. 冶炼工艺对H13钢组织和力学性能的影响[J]. 钢铁, 2013, 48(4): 59-63.
LIU Zhen-tian,ZHOU Jian,MA Dang-shen,QIU Li-peng,LIU Bao-shi. Effect of Smelting Process on Microstructure and Mechanical Property of H13 Steel. Iron and Steel, 2013, 48(4): 59-63.
Lars-Ake Norstrom,Lennart Jonson,Bengt Klarenfjord.Development of premium Die Steel for Diecasting[J],Die Casting Management,December 1990
[1]
Lars-Ake Norstrom,Lennart Jonson,Bengt Klarenfjord.Development of premium Die Steel for Diecasting[J],Die Casting Management,December 1990
[2]
Premium and Superior Quality H13 Steel and Heat Treatment Acceptance Criteria For Pressure Die Casting DiesNADCA# 207-2003[S]. [J].North American Die Casting Association,2003,4:-
[3]
崔崑,国内外模具钢发展概况[J].金属热处理,2007.32(1):1-11
[4]
Yukinori Matsuda,Koichi Sudo.The Effects of P and S on the Toughness and Heat-Checking Resistance of the 5% Cr Hot Work Die Steel[J].ELECTRIC FURNACE STEEL,1986,57(3):-
[2]
Premium and Superior Quality H13 Steel and Heat Treatment Acceptance Criteria For Pressure Die Casting DiesNADCA# 207-2003[S]. [J].North American Die Casting Association,2003,4:-
[3]
崔崑,国内外模具钢发展概况[J].金属热处理,2007.32(1):1-11
[4]
Yukinori Matsuda,Koichi Sudo.The Effects of P and S on the Toughness and Heat-Checking Resistance of the 5% Cr Hot Work Die Steel[J].ELECTRIC FURNACE STEEL,1986,57(3):-
[5]
Pickering,F B.The Properties of Tool Steels for Mould and Die Applications[J],1987,30(2):3-32.[J].Tool Materials for Molds and Dies: Application and Performance,1987,30(2):3-32
[6]
李正邦.21世纪电渣冶金的新进展[J].特殊钢,2004,25(5):1-5
[7]
邓玉昆,陈景榕,王世章.高速工具钢[M] . 北京: 冶金工业出版社,2002
[8]
杨卫国.热作模具钢显微组织新的评级图谱[J].国外金属热处理,2000,21(4):17-21
[5]
Pickering,F B.The Properties of Tool Steels for Mould and Die Applications[J],1987,30(2):3-32.[J].Tool Materials for Molds and Dies: Application and Performance,1987,30(2):3-32