Abstract：The microstructure stability of alloy 617, which is one of candidate materials for high temperature component of advanced ultra-supercritical coal-fire generating unit, was investigated after aging 1000, 2000, 3000 and 5000h at 750℃. Optical microscope, scanning electron microscope, transmission electron microscope and X-ray diffraction were used to analyze the intergranular and intragranular precipitates after aging. The results show that M23C6 carbide precipitates at grain boundaries; while the intragranular precipitate of γ′ is dispersoid distribution, and the size increases with aging time. The strength of test material increases after 1000h aging, and then the trend changes to smooth with aging time. And toughness of the test material decreases with aging time.
收稿日期: 2013-06-13
出版日期: 2014-02-20
引用本文:
杨权，谭舒平. 617合金的组织稳定性[J]. 钢铁, 2014, 49(2): 60-64.
YANG Quan,TAN Shu-ping. Analysis for the Microstructure Stability of Alloy 617. Iron and Steel, 2014, 49(2): 60-64.
Masafumi Fukuda.Advanced USC Technology Development in Japan.Rahman S, Priyadarshan G, Raja K S, et al. Investigation of the secondary phases of alloy 617 by scanning Kelvin probe force microscope[J]. Materials Letters, 2008, 62(15): 2263-2266
[1]
Masafumi Fukuda.Advanced USC Technology Development in Japan.Rahman S, Priyadarshan G, Raja K S, et al. Investigation of the secondary phases of alloy 617 by scanning Kelvin probe force microscope[J]. Materials Letters, 2008, 62(15): 2263-2266
[2]
L.Tan,K.Sridharan,T.R.Allen. Effect of thermomechanical processing on grain boundary character distribution of a Ni-based superalloy.Journal of nuclear materials 371(2007) P171-175
[2]
L.Tan,K.Sridharan,T.R.Allen. Effect of thermomechanical processing on grain boundary character distribution of a Ni-based superalloy.Journal of nuclear materials 371(2007) P171-175
Changheui Jang, Daejin Lee, Daejong Kim. Oxidation behaviour of an alloy 617 in very high-temperature air and helium environments [J]. Pressure Vessels and Piping, 2008,85:368-377
[4]
Changheui Jang, Daejin Lee, Daejong Kim. Oxidation behaviour of an alloy 617 in very high-temperature air and helium environments [J]. Pressure Vessels and Piping, 2008,85:368-377
[5]
Kun Mo,Gianfranco Lovicu, Hsiao-Ming Tung. High Temperature Aging and Corrosion Study on Alloy 617 and Alloy 230 [J]. Engineering for Gas Turbines and Power. 2011, 133
Kun Mo,Gianfranco Lovicu, Hsiao-Ming Tung. High Temperature Aging and Corrosion Study on Alloy 617 and Alloy 230 [J]. Engineering for Gas Turbines and Power. 2011, 133
2014, Vol. 49 
