Mold Sticking and Its Propagation Behavior During Slab Continuous Casting
LIU Yu1,WANG Xu-dong1,2,SHI Gui-qian3,YAO Man1, ZHANG Xiao-bing2,WANG Xiong2
1. School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China 2. Jiangsu Shagang Group, Zhangjiagang 215625, Jiangsu, China 3. WISDRI Engineering and Research Incorporation Limited, Wuhan 430223, Hubei, China
Abstract：Basing on the temperature measurement of a wide and thick slab continuous mold, the horizontal speed, vertical speed and propagation angle of the sticking were discussed. The effect of casting speed and slab dimensions on sticker’s propagation behavior was also analyzed. The results can be helpful to understand on propagation characteristic of sticking breakout, meanwhile, it can also provide basis for thermal couples layout optimization and the development of breakout prediction system.
收稿日期: 2013-05-13
出版日期: 2014-02-20
引用本文:
刘宇，王旭东 ，施桂钱，姚曼，张晓兵，王雄. 板坯连铸结晶器黏结及其传播行为[J]. 钢铁, 2014, 49(2): 29-33.
LIU Yu,WANG Xu-dong,,SHI Gui-qian,YAO Man, ZHANG Xiao-bing,WANG Xiong. Mold Sticking and Its Propagation Behavior During Slab Continuous Casting. Iron and Steel, 2014, 49(2): 29-33.
Qin X, Zhu C F, Zeng L W, et al. Molten Steel Breakout Prediction Based on Thermal Friction Measurement[J]. Journal of Iron and Steel Research(International), 2011, 18(4) : 24.
[4]
Qin X, Zhu C F, Zeng L W, et al. Molten Steel Breakout Prediction Based on Thermal Friction Measurement[J]. Journal of Iron and Steel Research(International), 2011, 18(4) : 24.
[5]
Zhang B G, Li Q, Wang G, et al. Breakout Prediction Based on BP Neural Network of LM Algorithm in Continuous Casting Process[C]// International Conference on Measuring Technology and Mechatronics Automation, 2010: 765.
[5]
Zhang B G, Li Q, Wang G, et al. Breakout Prediction Based on BP Neural Network of LM Algorithm in Continuous Casting Process[C]// International Conference on Measuring Technology and Mechatronics Automation, 2010: 765.
2014, Vol. 49 
