高炉炼铁过程数学模拟的研究进展

doi:10.13228/j.boyuan.issn0449-749x.20140253

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (0 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要高炉是最复杂的冶金反应器之一。为了更好地理解、优化和智能控制高炉炼铁过程，人们开发出大量的高炉数学模型。回顾了全高炉反应动力学数学模型的发展历程，重点介绍了典型研究成果——多流体高炉数学模型的创建实例及其应用；概述了国内外高炉智能专家系统的开发和应用情况；对高炉数学模型的未来发展做出了若干展望，指出CFD-DEM高炉模型、全高炉综合数学模型和专家系统的有机结合是未来高炉过程数字化和控制的发展方向。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	储满生
	王宏涛
	柳政根
	唐珏

关键词 ：高炉, 炼铁, 数学模型, 专家系统, 多流体理论

Abstract：Blast furnace is one of the most complex metallurgical reactor. In order to achieve deep understanding, further optimization, and intelligent control of the blast furnace process, many mathematical models were developed. The paper firstly reviews the development course of reaction kinetics models of total blast furnace and focuses on introducing the typical research achievements on the creation and application of multi-fluid blast furnace model. Then, the development and application status of intelligent expert system at home and abroad are summarized. Some prospects of the development of blast furnace mathematical models in the future are put forward and pointed out that the future development on digital simulation and control for the blast furnace process is combining the CFD-DEM model, the whole comprehensive mathematical model of blast furnace with blast furnace expert system.

收稿日期: 2014-04-21 出版日期: 2014-11-02

PACS:

TF 531

引用本文:

储满生，王宏涛，柳政根，唐珏. 高炉炼铁过程数学模拟的研究进展[J]. 钢铁, 2014, 49(11): 1-8. CHU Man-sheng, WANG Hong-tao, LIU Zheng-gen, TANG Jue. Research Progress on Mathematical Modeling of Blast Furnace Ironmaking Process. Iron and Steel, 2014, 49(11): 1-8.

链接本文:

http://www.chinamet.cn/Jweb_gt/CN/10.13228/j.boyuan.issn0449-749x.20140253 或 http://www.chinamet.cn/Jweb_gt/CN/Y2014/V49/I11/1

[1]	World steel association.World steel in figures 2013[R]. 2013：1-11.
[1]	World steel association.World steel in figures 2013[R]. 2013：1-11.
[2]	Ariyama T，Sato M.Optimization of ironmaking process for reducing CO2 emission in the integrated steel works[J].ISIJ International, 2006, 46(12):1736-1744
[2]	Ariyama T，Sato M.Optimization of ironmaking process for reducing CO2 emission in the integrated steel works[J].ISIJ International, 2006, 46(12):1736-1744
[3]	徐匡迪.低碳经济与钢铁工业[J].钢铁, 2010, 45(3):1-12
[3]	徐匡迪.低碳经济与钢铁工业[J].钢铁, 2010, 45(3):1-12
[4]	朱苗勇.现代冶金工艺学(钢铁冶金卷)[M]. 北京：冶金工业出版社，2011．
[4]	朱苗勇.现代冶金工艺学(钢铁冶金卷)[M]. 北京：冶金工业出版社，2011．
[5]	CHU Man-sheng, YAGI Jun-ichiro, SHEN Feng-man.Modelling on blast furnace process and innovative ironmaking technologies[M]. Shenyang: Northeastern University Press, 2006.
[5]	CHU Man-sheng, YAGI Jun-ichiro, SHEN Feng-man.Modelling on blast furnace process and innovative ironmaking technologies[M]. Shenyang: Northeastern University Press, 2006.
[6]	毕学工.高炉过程数学模型及计算机控制[M]. 北京：冶金工业出版社，1996.
[6]	毕学工.高炉过程数学模型及计算机控制[M]. 北京：冶金工业出版社，1996.
[7]	YASUO Omori.Blast furnace phenomena and modeling[M]. London: Elsevier Applied Science, 1987.
[7]	YASUO Omori.Blast furnace phenomena and modeling[M]. London: Elsevier Applied Science, 1987.
[8]	YAGI Jun-ichiro.Mathematical modeling of the flow of four fluids in a packed bed[J].ISIJ International, 1993, 33(6):619-639
[8]	YAGI Jun-ichiro.Mathematical modeling of the flow of four fluids in a packed bed[J].ISIJ International, 1993, 33(6):619-639
[9]	AUSTIN Peter Richard, NOGAMI Hiroshi, YAGI Jun-ichiro J.A mathematical model for blast furnace reaction analysis based on the four fluid model[J].ISIJ International, 1997, 37(8):748-755
[9]	AUSTIN Peter Richard, NOGAMI Hiroshi, YAGI Jun-ichiro J.A mathematical model for blast furnace reaction analysis based on the four fluid model[J].ISIJ International, 1997, 37(8):748-755
[10]	CASTRO Jose Adilson, NOGAMI Hiroshi, YAGI Jun-ichiro.Transient mathematical model of blast furnace based on multi-fluid concept,with application to high PCI operation[J].ISIJ International, 2000, 40(7):637-646
[10]	CASTRO Jose Adilson, NOGAMI Hiroshi, YAGI Jun-ichiro.Transient mathematical model of blast furnace based on multi-fluid concept,with application to high PCI operation[J].ISIJ International, 2000, 40(7):637-646
[11]	PINTOWANTORO Sungging, NOGAMI Hiroshi, YAGI Jun-ichiro.Numerical analysis of static hold up of fine particles in blast furnace[J].ISIJ International, 2004, 42(2):304-309
[11]	PINTOWANTORO Sungging, NOGAMI Hiroshi, YAGI Jun-ichiro.Numerical analysis of static hold up of fine particles in blast furnace[J].ISIJ International, 2004, 42(2):304-309
[12]	CHU Man-sheng.Study on super high efficiency operations of blast furnace based on multi-fluid model[D]. Sendai: Tohoku University, Japan, 2004.
[12]	CHU Man-sheng.Study on super high efficiency operations of blast furnace based on multi-fluid model[D]. Sendai: Tohoku University, Japan, 2004.
[13]	CHU Man-sheng, NOGAMI Hiroshi, YAGI Jun-ichiro.Numerical analysis on injection of hydrogen bearing materials into blast furnace[J].ISIJ International, 2004, 44(3):801-808
[13]	CHU Man-sheng, NOGAMI Hiroshi, YAGI Jun-ichiro.Numerical analysis on injection of hydrogen bearing materials into blast furnace[J].ISIJ International, 2004, 44(3):801-808
[14]	CHU Man-sheng, NOGAMI Hiroshi, YAGI Jun-ichiro.Numerical analysis on charging carbon composite agglomerates into blast furnace[J].ISIJ International, 2004, 44(5):510-517
[14]	CHU Man-sheng, NOGAMI Hiroshi, YAGI Jun-ichiro.Numerical analysis on charging carbon composite agglomerates into blast furnace[J].ISIJ International, 2004, 44(5):510-517
[15]	CHU Man-sheng, NOGAMI Hiroshi, YAGI Jun-ichiro.Numerical analysis on blast furnace performance under operation with top gas recyccling and carbon composite agglomerates charging[J].ISIJ International, 2004, 44(12):2159-2167
[15]	CHU Man-sheng, NOGAMI Hiroshi, YAGI Jun-ichiro.Numerical analysis on blast furnace performance under operation with top gas recyccling and carbon composite agglomerates charging[J].ISIJ International, 2004, 44(12):2159-2167
[16]	YAGI Jun-ichiro.Mathematical model of blast furnace progress and application to new technology development[A]. The 6th International Congress on the Science and Technology of Ironmaking –ICSTI[C], Rio de Janeiro, RJ Brazil, 2012, 1660-1674.
[16]	YAGI Jun-ichiro.Mathematical model of blast furnace progress and application to new technology development[A]. The 6th International Congress on the Science and Technology of Ironmaking –ICSTI[C], Rio de Janeiro, RJ Brazil, 2012, 1660-1674.
[17]	DONG Xue-feng, YU Ai-bing, YAGI Jun-ichiro, et al.Modelling of multiphase in a blast furnace: recent development and future work[J].ISIJ International, 2007, 47(11):1553-1570
[17]	DONG Xue-feng, YU Ai-bing, YAGI Jun-ichiro, et al.Modelling of multiphase in a blast furnace: recent development and future work[J].ISIJ International, 2007, 47(11):1553-1570
[18]	ZOU Zongyan.ZHU Haiping,YU Aibing,et alNumerical investigation of the Transient multiphase flow in an ironmaking blast furnace[J].ISIJ International, 2010, 50(4):515-523
[18]	ZOU Zongyan.ZHU Haiping,YU Aibing,et alNumerical investigation of the Transient multiphase flow in an ironmaking blast furnace[J].ISIJ International, 2010, 50(4):515-523
[19]	储满生，郭宪臻，沈峰满，等.多流体高炉数学模型的开发和应用[J].钢铁, 2007, 42(12):11-15
[19]	储满生，郭宪臻，沈峰满，等.多流体高炉数学模型的开发和应用[J].钢铁, 2007, 42(12):11-15
[20]	CASTRO Jose Adilson, NOGAMI Hiroshi, YAGI Jun-ichiro.Three dimensional multiphase mathematical modeling of the blast furnace based on multifluid model[J].ISIJ International, 2002, 42(1):44-52
[20]	CASTRO Jose Adilson, NOGAMI Hiroshi, YAGI Jun-ichiro.Three dimensional multiphase mathematical modeling of the blast furnace based on multifluid model[J].ISIJ International, 2002, 42(1):44-52
[21]	储满生，郭宪臻，沈峰满，等.高炉数学模型的进展[J].中国冶金, 2007, 17(4):10-14
[21]	储满生，郭宪臻，沈峰满，等.高炉数学模型的进展[J].中国冶金, 2007, 17(4):10-14
[22]	白俊丽，张建良，国宏伟，等.高炉专家系统中的基础数学模型[J].武汉科技大学学报, 2013, 36(5):331-336
[22]	白俊丽，张建良，国宏伟，等.高炉专家系统中的基础数学模型[J].武汉科技大学学报, 2013, 36(5):331-336
[23]	NAITO Masaaki, TAKEDA Kanji, MATSUI Yoshiyuki.Ironmaking technology for the last 100 years: from adopted technologies to a position of leadershio in advanced and next-generation technology[J].Tetsu-to-Hagane, 2014, 100(1):2-30
[23]	NAITO Masaaki, TAKEDA Kanji, MATSUI Yoshiyuki.Ironmaking technology for the last 100 years: from adopted technologies to a position of leadershio in advanced and next-generation technology[J].Tetsu-to-Hagane, 2014, 100(1):2-30
[24]	陈令坤，傅连春，于仲洁.武钢４号高炉专家系统的应用[J].炼铁, 2001, 20(S2):71-74
[24]	陈令坤，傅连春，于仲洁.武钢４号高炉专家系统的应用[J].炼铁, 2001, 20(S2):71-74
[25]	刘官祥，曾九孙，郝志忠，等.多模型集成的高炉炼铁智能控制专家系统[J].浙江大学学报工学版, 2007, 41(10):1637-1642
[25]	刘官祥，曾九孙，郝志忠，等.多模型集成的高炉炼铁智能控制专家系统[J].浙江大学学报工学版, 2007, 41(10):1637-1642
[26]	国宏伟，邓君堂，陈杉杉，等.高炉专家系统的数据采集及处理[J].冶金自动化, 2008, 32(3):18-22
[26]	国宏伟，邓君堂，陈杉杉，等.高炉专家系统的数据采集及处理[J].冶金自动化, 2008, 32(3):18-22
[27]	宁向军.高炉长寿技术浅析[J].黑龙江冶金, 2013, 33(1):30-31
[27]	宁向军.高炉长寿技术浅析[J].黑龙江冶金, 2013, 33(1):30-31
[28]	冶金工业信息标准研究院.日本高炉长寿化技术的开发[J].世界钢铁技术, 2013, (9):29-43
[28]	冶金工业信息标准研究院.日本高炉长寿化技术的开发[J].世界钢铁技术, 2013, (9):29-43