Abstract:Firstly, the current situation and development trend of China’s automobile industry were analyzed and predicted, the auto production is likely to reach around 36 million in 2020. With the rapid development of auto, automotive steels are also facing challenges such as safety, environment, resource, energy, cost, and so on. The rapid growth of auto and huge market in China bring great opportunities for the development of automotive steel, while the metallurgical industry is also facing fierce competition from the non-steel material and challenges of users. The development potential of automotive steels and the response options that may be taken by steel industries are discussed. The recent development of alloy content in high strength automotive steels, the fine control and application technology of microstructure and properties in new high strength steel, the fine microstructure of ultra-high strength dual phase steel and quenching-partitioning steel, the control of nanoparticle precipitation in cold rolled high strength steel, the process and microstructure and properties of hot stamped steel, the forming technology and application of advanced high strength steel were also analyzed. Finally, the strengthening and improvement of early vendor involvement (EVI) service system of automotive steel suppliers were introduced.
收稿日期: 2014-09-09
出版日期: 2014-12-02
引用本文:
康永林, 朱国明. 中国汽车发展趋势及汽车用钢面临的机遇与挑战[J]. 钢铁, 2014, 49(12): 1-7.
KANG Yong-lin, ZHU Guo-ming. Development Trend of China’s Automobile Industry and the Opportunities and Challenges of Steels for Automobiles. Iron and Steel, 2014, 49(12): 1-7.
Kang Yonglin.Potential improvement in performance of auto steel[J].International Conference on Green Manufacturing – the Future of Steel and Automobile, 2013, Proceedings:4-10
[1]
Kang Yonglin.Potential improvement in performance of auto steel[J].International Conference on Green Manufacturing – the Future of Steel and Automobile, 2013, Proceedings:4-10
Bian Jian.Hardy Mohrbacher,Novel alloying design for press hardening Steels with better crash performance,[J].Proc. of the 2nd International symposium on automobile steel, 2013, 2013:104-108
[4]
Bian Jian.Hardy Mohrbacher,Novel alloying design for press hardening Steels with better crash performance,[J].Proc. of the 2nd International symposium on automobile steel, 2013, 2013:104-108
[5]
蒋浩民. 宝钢液压成形技术研发[J].微合金化技术, 2013, 8(3):96-100
[5]
蒋浩民. 宝钢液压成形技术研发[J].微合金化技术, 2013, 8(3):96-100
[6]
Zhiqiang Li, B. Farrand,Tubemaking.Hydroforming and Its Application in Automotive Industry[J].CSM2005 ANNAL Meeting Proceedings, 2005, 2005:105-108
[6]
Zhiqiang Li, B. Farrand,Tubemaking.Hydroforming and Its Application in Automotive Industry[J].CSM2005 ANNAL Meeting Proceedings, 2005, 2005:105-108
[7]
Fran?ois MOUSSY.Evolution of Steels for Car Manufacturing : Mechanical Considerations[J].Proceedings of the 2nd ISAS 2013, 2013, 2013:15-21
[7]
Fran?ois MOUSSY.Evolution of Steels for Car Manufacturing : Mechanical Considerations[J].Proceedings of the 2nd ISAS 2013, 2013, 2013:15-21
[8]
Oliver Hoffmann. Innovative Steel Products and Technologies for Automotive Lightweight Design[J].Proceedings of 2009 International Symposium on Automobile Steel, 2009, 2009:416-422
[8]
Oliver Hoffmann. Innovative Steel Products and Technologies for Automotive Lightweight Design[J].Proceedings of 2009 International Symposium on Automobile Steel, 2009, 2009:416-422
[9]
Armin Plath.Vehicle lightweight design with advanced steel applications[J].Proceedings of 2013 International Symposium on Automobile Steel, 2013, 2013:316-318
[9]
Armin Plath.Vehicle lightweight design with advanced steel applications[J].Proceedings of 2013 International Symposium on Automobile Steel, 2013, 2013:316-318
[10]
Liu Xianghua.Variable Sheet for Car Lightweight and Design by Optimization of Surplus Capacity[J].Proceedings of 2013 International Symposium on Automobile Steel, 2013, 2013:223-228
[10]
Liu Xianghua.Variable Sheet for Car Lightweight and Design by Optimization of Surplus Capacity[J].Proceedings of 2013 International Symposium on Automobile Steel, 2013, 2013:223-228