700 ℃汽轮机转子用耐热合金的研究进展

doi:10.13228/j.boyuan.issn0449-749x.20140371

摘要
图/表
参考文献
相关文章 (5)

全文: PDF (0 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要 700 ℃超超临界电站用高中压转子是汽轮机中的核心部件，高中压汽轮机转子材料的选择是当前的研究热点。新型铁素体系和奥氏体系耐热钢的研发促进了600 ℃超超临界火力发电机组的建设，而铁素体系和奥氏体系耐热钢已经不适用于700 ℃超超临界电站中高温部件的制造，必须考虑采用镍基耐热合金。文章着重分析了700 ℃超超临界汽轮机转子用耐热合金的技术特点，介绍了欧洲、美国和日本在700 ℃超超临界汽轮机转子耐热合金的研发和工业制造方面所取得的最新进展，讨论了中国700 ℃超超临界汽轮机转子耐热合金的发展趋势。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	田仲良
	包汉生
	何西扣
	刘正东

关键词 ： 700℃超超临界机组, 耐热合金, 汽轮机转子

Abstract：The high pressure and intermediate pressure turbine rotor are the core components of 700 ℃ USC power plants. Many researchers are focusing on the candidates material used for HP and IP rotor. New developed ferritic and austenitic heat resistant steels promotes the construction of 600 ℃ USC power plants. But ferritic and austenitic steels can’t be used for high temperature components of 700 ℃ USC plants， and nickel based alloy must be considered. The technological characteristics of heat resistant alloy used for 700 ℃ USC steam turbine rotor were introduced. The latest research results on material selection and commercial manufacture in Europe， America and Japan was reviewed. Moreover， the development of heat resistant alloy for 700 ℃ USC turbine rotor in China was discussed.

Key words： 700℃ ultra-supercritical unit heat resistant alloy turbine rotor

收稿日期: 2014-06-18 出版日期: 2015-02-02

PACS:

TG132.3+3

引用本文:

田仲良，包汉生，何西扣，刘正东. 700 ℃汽轮机转子用耐热合金的研究进展[J]. 钢铁, 2015, 50(2): 54-60. TIAN Zhong-liang， BAO Han-sheng， HE Xi-kou， LIU Zheng-dong. Research development on the heat resistant alloy used for 700 ℃ USC turbine rotor. Iron and Steel, 2015, 50(2): 54-60.

链接本文:

http://www.chinamet.cn/Jweb_gt/CN/10.13228/j.boyuan.issn0449-749x.20140371 或 http://www.chinamet.cn/Jweb_gt/CN/Y2015/V50/I2/54

[1]	傅万堂，张百忠，王宝忠.超临界与超超临界转子材料发展情况综述[J].大型铸锻件，2008（5）：33-36.
[1]	傅万堂，张百忠，王宝忠.超临界与超超临界转子材料发展情况综述[J].大型铸锻件，2008（5）：33-36.
[2]	WrightI I G，Maziasz P J，Ellis F V，et al. Materials issues for turbines for operation in ultra-supercriticalsteam [C]．The 20th International Technical Conference on Coal Utilization and Fuel Systems，Clearwater，Florida，USA，2004．
[2]	WrightI I G，Maziasz P J，Ellis F V，et al. Materials issues for turbines for operation in ultra-supercriticalsteam [C]．The 20th International Technical Conference on Coal Utilization and Fuel Systems，Clearwater，Florida，USA，2004．
[3]	彭建强.700℃以上超超临界汽轮机高中压转子用材研究[J].大型铸锻，2013（6）：16-21.
[3]	彭建强.700℃以上超超临界汽轮机高中压转子用材研究[J].大型铸锻，2013（6）：16-21.
[4]	周辉，丁亮.汽轮机胀差产生的原因分析与控制[J].应用能源技术，2011（7）：4-6.
[4]	周辉，丁亮.汽轮机胀差产生的原因分析与控制[J].应用能源技术，2011（7）：4-6.
[5]	牛卫杰，王国平，刘进伟. 高温耐蚀镍基合金的焊接研究现状及展望[J]. 现代焊接，2013 (9):8-12.
[5]	牛卫杰，王国平，刘进伟. 高温耐蚀镍基合金的焊接研究现状及展望[J]. 现代焊接，2013 (9):8-12.
[6]	Arrell D. Next Generation Engineered Materials For Ultra Supercritical Steam Turbines， siemens power generation report，No. DE-FC26-04NT42232[R]. Orlando，USA , 2006.
[6]	Arrell D. Next Generation Engineered Materials For Ultra Supercritical Steam Turbines， siemens power generation report，No. DE-FC26-04NT42232[R]. Orlando，USA , 2006.
[7]	PIRSCHER A．Alstom steam turbine design for AD700 power plant [EB/OL]．Milan Conference，2005．https://projectweb.elsam-eng.com/AD700/Milan% 20Conference/Attachment% 2010% 20 -% 20Milan %20conference%202005.pdf.
[7]	PIRSCHER A．Alstom steam turbine design for AD700 power plant [EB/OL]．Milan Conference，2005．https://projectweb.elsam-eng.com/AD700/Milan% 20Conference/Attachment% 2010% 20 -% 20Milan %20conference%202005.pdf.
[8]	Blum R，Vanstone R W．Material development for Boiler and Steam Turbines Operating at 700℃[C]．Proceedings of the Sixth International Charles Parsons Turbine Conferenee，Trinity College Dublin，Ireland，2003：489-510．
[8]	Blum R，Vanstone R W．Material development for Boiler and Steam Turbines Operating at 700℃[C]．Proceedings of the Sixth International Charles Parsons Turbine Conferenee，Trinity College Dublin，Ireland，2003：489-510．
[9]	Sch?nfeld K H，Blaes N，Bokelmann D，et al. Superalloy forgings for advanced high temperature power plant[C]. Proceedings from Fourth International Conference on Advances in Materials Technology for Fossil Power Plant，2004：552-558.
[9]	Sch?nfeld K H，Blaes N，Bokelmann D，et al. Superalloy forgings for advanced high temperature power plant[C]. Proceedings from Fourth International Conference on Advances in Materials Technology for Fossil Power Plant，2004：552-558.
[10]	N. Blaes，B. Donth，A. Diwo，et al. Advanced Forgings for Highly Efficient Fossil Power Plant[C]. Proceedings from the sixth International Conference on Advances in Materials Technology for Fossil Plants, 2010:436-449.
[10]	N. Blaes，B. Donth，A. Diwo，et al. Advanced Forgings for Highly Efficient Fossil Power Plant[C]. Proceedings from the sixth International Conference on Advances in Materials Technology for Fossil Plants, 2010:436-449.
[11]	Advanced Turbine Materials for UltraSuperCritical Coal Power Plants, Annual Report- 2006[R].Steam Turbine Materials Consortium.
[11]	Advanced Turbine Materials for UltraSuperCritical Coal Power Plants, Annual Report- 2006[R].Steam Turbine Materials Consortium.
[12]	Advanced Turbine Materials for UltraSuperCritical Coal Power Plants, Annual Report- 2007[R].Steam Turbine Materials Consortium.
[12]	Advanced Turbine Materials for UltraSuperCritical Coal Power Plants, Annual Report- 2007[R].Steam Turbine Materials Consortium.
[13]	Advanced Turbine Materials for UltraSuperCritical Coal Power Plants, Annual Report- 2009[R].Steam Turbine Materials Consortium.
[13]	Advanced Turbine Materials for UltraSuperCritical Coal Power Plants, Annual Report- 2009[R].Steam Turbine Materials Consortium.
[14]	Robin S，Chen S，Monica S. New Materials Enable Unprecedented Improvement in Turbine Performance[J]. Advanced Materials & Processes，2013：18-22.
[14]	Robin S，Chen S，Monica S. New Materials Enable Unprecedented Improvement in Turbine Performance[J]. Advanced Materials & Processes，2013：18-22.
[15]	Masafumi Fukuda, Eiji Saito, Yoshinori Tanaka, et al.Advanced USC technology development in Japan[C]. Proceedings from the sixth International Conference on Advances in Materials Technology for Fossil Plants, 2010:325-341.
[15]	Masafumi Fukuda, Eiji Saito, Yoshinori Tanaka, et al.Advanced USC technology development in Japan[C]. Proceedings from the sixth International Conference on Advances in Materials Technology for Fossil Plants, 2010:325-341.
[16]	福田雅文.A- U S C 先進超々臨界圧火力発電技術[J]. 特殊鋼.2011(60):8-13.
[16]	福田雅文.A- U S C 先進超々臨界圧火力発電技術[J]. 特殊鋼.2011(60):8-13.
[17]	S.Imano，H.Doi，E.Saitoh, et al. Modification of Ni-Fe base Superalloy for Steam Turbine Applications[C]. Advances in Materials Technology for Fossil Power Plants. Proceedings form the Fourth International Conference on Advances in Materials Technology for Fossil Power Plants.2004:575-586.
[17]	S.Imano，H.Doi，E.Saitoh, et al. Modification of Ni-Fe base Superalloy for Steam Turbine Applications[C]. Advances in Materials Technology for Fossil Power Plants. Proceedings form the Fourth International Conference on Advances in Materials Technology for Fossil Power Plants.2004:575-586.
[18]	Hajime Kimura，Takashi Sato，Christian Bergins，et al. Development Of Technology For Improving Efficiency Of Large Coal-Fired Thermal Power Plants[J].Hitachi Review，2011，60（7）：365-371.
[18]	Hajime Kimura，Takashi Sato，Christian Bergins，et al. Development Of Technology For Improving Efficiency Of Large Coal-Fired Thermal Power Plants[J].Hitachi Review，2011，60（7）：365-371.
[19]	Shinya Imano,Jun Sato，Hironori Kamoshida，et al. Development Status of Ni-Fe Base Superalloy for 700℃ Class A-USC Steam Turbine Rotor Application[C]. Proceedings from the sixth International Conference on Advances in Materials Technology for Fossil Plants, 2010:423-435.
[19]	Shinya Imano,Jun Sato，Hironori Kamoshida，et al. Development Status of Ni-Fe Base Superalloy for 700℃ Class A-USC Steam Turbine Rotor Application[C]. Proceedings from the sixth International Conference on Advances in Materials Technology for Fossil Plants, 2010:423-435.
[20]	山本隆一, 角屋好邦, 河合久孝, ほか.蒸気タービン用低熱膨張Ni基合金の合金設計と材料特性[C]. 鉄と鋼，2004，9（1）:37-42.
[20]	山本隆一, 角屋好邦, 河合久孝, ほか.蒸気タービン用低熱膨張Ni基合金の合金設計と材料特性[C]. 鉄と鋼，2004，9（1）:37-42.
[21]	Ryuichi Yamamoto, Yoshikuni Kadoya, Takashi Nakano.Development of Ni-based superalloy for advanced 700℃-Class steam turbines[C]. Proceedings from the fifth Intermational Conference on Advances in Materials Technology for Fossil Power Plant.2007:434-446.
[21]	Ryuichi Yamamoto, Yoshikuni Kadoya, Takashi Nakano.Development of Ni-based superalloy for advanced 700℃-Class steam turbines[C]. Proceedings from the fifth Intermational Conference on Advances in Materials Technology for Fossil Power Plant.2007:434-446.
[22]	倉田征児，植田茂纪，野田俊治，ほか. 700℃級A-USC蒸気タービン用低熱膨脹NI基超合金LTES700R[C].電気製鋼，2008，79：239-244.
[22]	倉田征児，植田茂纪，野田俊治，ほか. 700℃級A-USC蒸気タービン用低熱膨脹NI基超合金LTES700R[C].電気製鋼，2008，79：239-244.
[23]	中村眞二，河島弘毅，竹井康裕，ほか.A-USC(700℃級先進超々臨界圧発電)の技術開発と展望. 三菱重工技報. 2011,48(3):8-15.
[23]	中村眞二，河島弘毅，竹井康裕，ほか.A-USC(700℃級先進超々臨界圧発電)の技術開発と展望. 三菱重工技報. 2011,48(3):8-15.
[24]	久保貴博，宮下重和，根本邦義. 700℃級蒸気タービン用材料の開発と機械的特性[C]. 高温?高効率発電. 動力エネルギー技術シンポジウム講演論文集.第16回，465-466.
[24]	久保貴博，宮下重和，根本邦義. 700℃級蒸気タービン用材料の開発と機械的特性[C]. 高温?高効率発電. 動力エネルギー技術シンポジウム講演論文集.第16回，465-466.
[25]	Miyashita S，Yoshioka Y，Kubo T. Development And Evaluation Of Large-Scale Rotor Forging For Over 700℃-Class A-Usc Steam Turbine[J].
[25]	Miyashita S，Yoshioka Y，Kubo T. Development And Evaluation Of Large-Scale Rotor Forging For Over 700℃-Class A-Usc Steam Turbine[J].
[26]	今井潔, 根本邦義, 宮下重和. 先進型超々臨界圧タービン用ロータ材料の開発[C].高温?高効率発電(2),動力エネルギー技術シンポジウム講演論文集.第13回，353-354.
[26]	今井潔, 根本邦義, 宮下重和. 先進型超々臨界圧タービン用ロータ材料の開発[C].高温?高効率発電(2),動力エネルギー技術シンポジウム講演論文集.第13回，353-354.
[27]	須賀?威夫，高橋?武雄，今井?潔. 700℃級先進超々臨界圧蒸気タービンシステム[J]. 東芝レビュー，2008，63，（9）：8-11.
[27]	須賀?威夫，高橋?武雄，今井?潔. 700℃級先進超々臨界圧蒸気タービンシステム[J]. 東芝レビュー，2008，63，（9）：8-11.