Research and application of position error compensation model for shape meter
ZHAO Zhang-xian1, WANG Dong-cheng1,2, WANG Peng-fei1, LIU Hong-min1,2
1. National Engineering Research Center for Equipment and Technology of Cold Rolling Strip, Yanshan University,Qinhuangdao 066004, Hebei, China 2. State Key Laboratory of Metastable Materials Science and Technology,Yanshan University, Qinhuangdao 066004, Hebei, China
Abstract:In order to solve the unavoidable tilt of shape meter in the practice of cold rolling, the position error compensation models of up-coil and down-coil were established. The models were based on the geometry and shape theory, combined with the character of arrangement of rolling equipment and the parameters of the strip. An example of certain cold rolling was analyzed. The effect of the vertical and horizontal error under the min and max coil diameter of the up-coil and down-coil on the strip shape was obtained. The tolerance error of the shape meter was gained as also. The position error compensation model was applied in practice of a certain six-high rollings. The application results show that the flatness standard deviation in steady state was within 5 I, the quality of strip shape was improved obviously.
赵章献, 王东城, 王鹏飞, 刘宏民,. 板形仪位置误差补偿模型的研究及应用[J]. 钢铁, 2015, 50(3): 49-53.
ZHAO Zhang-xian, WANG Dong-cheng,, WANG Peng-fei, LIU Hong-min,. Research and application of position error compensation model for shape meter. Iron and Steel, 2015, 50(3): 49-53.
S. Abdelkhalek, P. Montmitonnet, N. Legrand, P. Buessler, Coupled approach for flatness prediction in cold rolling of thin strip[J]. International Journal of Mechanical Sciences,2011,9(53): 661-675.
[1]
S. Abdelkhalek, P. Montmitonnet, N. Legrand, P. Buessler, Coupled approach for flatness prediction in cold rolling of thin strip[J]. International Journal of Mechanical Sciences,2011,9(53): 661-675.
[2]
WANG Peng-fei, PENG Yan, LIU Hong-min, et al…Actuator Efficiency Adaptive Flatness Control Model and Its Application in 1250 mm Reversible Cold Strip Mill[J], Journal of Iron and Steel Research, International 2013,6(20):13-20.
[2]
WANG Peng-fei, PENG Yan, LIU Hong-min, et al…Actuator Efficiency Adaptive Flatness Control Model and Its Application in 1250 mm Reversible Cold Strip Mill[J], Journal of Iron and Steel Research, International 2013,6(20):13-20.