Development and property of a new ultrahigh-strength stainless steel for the marine service
LIU Zhen-bao1,LIANG Jian-xiong1,LI Wen-hui1,ZHANG Xiu-li2,SUN Yong-qing1,WANG Chang-jun1
(1. Special Steel Institute, Central Iron and Steel Research Institute, Beijing 100081, China 2. Technique Center,Fushun Special Steel Group, Fushun 113001, Liaoning, China)
Abstract:A new ultra-high strength stainless steel with ultra-high purity has been successfully developed through the-precipitation hardening of intermetallic compound and carbide and ultra-clean. The results show that its tensile strength[Rm] is 1 940 MPa,and the fracture toughness,[KIC,]is more than 90 MPa·m1/2. Besides,it also shows good fatigue and high-temperature mechanical properties. The corrosion resistance of the steel is equivalent to that of 15-5PH stainless steel under the condition of the marine atmosphere and sea water immersion,which is much better than that of AerMet100 steel at the same strength level. Due to the excellent combination of mechanical and anti-corrison properties,the developed steel is expected to be widely used in the fields of aviation,aerospace,advanced machinery,and nuclear.
刘振宝,梁剑雄,李文辉,张秀丽,孙永庆 ,王长军. 耐海洋环境腐蚀高强度不锈钢的设计与性能[J]. 钢铁, 2015, 50(6): 57-62.
LIU Zhen-bao,LIANG Jian-xiong,LI Wen-hui,ZHANG Xiu-li,SUN Yong-qing,WANG Chang-jun. Development and property of a new ultrahigh-strength stainless steel for the marine service. Iron and Steel, 2015, 50(6): 57-62.
W.M.Crawfird, G.P.Contractor. The Effects of Strengthening Be and Ti in Maraging Stainless Steel.JIPI.1969, 207(12):1642
[1]
W.M.Crawfird, G.P.Contractor. The Effects of Strengthening Be and Ti in Maraging Stainless Steel.JIPI.1969, 207(12):1642
[2]
魏振宇.马氏体时效不锈钢[J].新金属材料,1972(4):22(Z.Y. Wei. Maraging Stainless Steel[J]. NEW METAL MATERIAl,1972(4):22)
[2]
魏振宇.马氏体时效不锈钢[J].新金属材料,1972(4):22(Z.Y. Wei. Maraging Stainless Steel[J]. NEW METAL MATERIAl,1972(4):22)
[3]
W.H.Imrie. Maraging Steel in the British Aerospace Industry. Metal Forming, 1970(1,2):41
[3]
W.H.Imrie. Maraging Steel in the British Aerospace Industry. Metal Forming, 1970(1,2):41
[4]
姜 越,尹钟大,朱景川,等.马氏体时效不锈钢的发展现状[J].特殊钢,2003,24(3):1~5(Y.Jiang, Z.D.Yin, J.C.Zhu,et al. Development Status of Maraging Stainless Steel[J].SPECIAL STEEL,2003,24(3):1~5)
[4]
姜 越,尹钟大,朱景川,等.马氏体时效不锈钢的发展现状[J].特殊钢,2003,24(3):1~5(Y.Jiang, Z.D.Yin, J.C.Zhu,et al. Development Status of Maraging Stainless Steel[J].SPECIAL STEEL,2003,24(3):1~5)
[5]
R.K.Wilson. Maraging Steels-Recent Development and Applications[J]. TMSAIME, Warrendale, PA, 1988,1
[5]
R.K.Wilson. Maraging Steels-Recent Development and Applications[J]. TMSAIME, Warrendale, PA, 1988,1
[6]
赵先存,黄桂煌.国外不锈钢现状及动向.国外金属材料[J],1980(5):1(X.C.Zhao, G.H.Huang, Develop and Tide of Stainless Steel in overseas. metal material of overseas[J], 1980(5):1)
[6]
赵先存,黄桂煌.国外不锈钢现状及动向.国外金属材料[J],1980(5):1(X.C.Zhao, G.H.Huang, Develop and Tide of Stainless Steel in overseas. metal material of overseas[J], 1980(5):1)
[7]
刘振宝,宋为顺,杨志勇,等.时效对超高强马氏体时效不锈钢组织与性能的影响.材料热处理学报,2005,26(4):52~55(Z.B.Liu,W.S.Song, Z.Y.Yang,et al. Effect of aging on microstructure and mechanical properties of a ultra-high strength maraging stainless steel[J].Transactions of Materials and Heat Treatment, 2005,26(4):52~55)
[7]
刘振宝,宋为顺,杨志勇,等.时效对超高强马氏体时效不锈钢组织与性能的影响.材料热处理学报,2005,26(4):52~55(Z.B.Liu,W.S.Song, Z.Y.Yang,et al. Effect of aging on microstructure and mechanical properties of a ultra-high strength maraging stainless steel[J].Transactions of Materials and Heat Treatment, 2005,26(4):52~55)
[8]
Martin, el al., U.S , Patents 5,681,528.
[8]
Martin, el al., U.S , Patents 5,681,528.
[9]
Charles J. Kuehmann, Ph.D. Computational Design of High-Strength, High-Toughness Stainless Steel for Carrier-Based Aircraft.
[9]
Charles J. Kuehmann, Ph.D. Computational Design of High-Strength, High-Toughness Stainless Steel for Carrier-Based Aircraft.
[10]
陆世英,张廷凯等.不锈钢.北京:原子能出版社,1995:19~59(S.Y.Lu, et al. Stainless Steel[M].Beijing: ATOMIC ENERGY PRESS, 1995.10~76)
[10]
陆世英,张廷凯等.不锈钢.北京:原子能出版社,1995:19~59(S.Y.Lu, et al. Stainless Steel[M].Beijing: ATOMIC ENERGY PRESS, 1995.10~76)
[11]
刘振宝,杨志勇,等.固溶处理对新型马氏体时效不锈钢力学性能影响研究[J].钢铁,2007,42(3):47~51(Z.B.Liu ,Z.Y.Yang,et al.The effect of solution treatment on mechanical properties of a new type maraging stainless steel[J].IRON AND STEEL, 2007,42(3):47~51)
[11]
刘振宝,杨志勇,等.固溶处理对新型马氏体时效不锈钢力学性能影响研究[J].钢铁,2007,42(3):47~51(Z.B.Liu ,Z.Y.Yang,et al.The effect of solution treatment on mechanical properties of a new type maraging stainless steel[J].IRON AND STEEL, 2007,42(3):47~51)
[12]
Bendel.Lee P.(Lebanon,NJ); Sardel.Timothy A.(Somerset,NJ)United States Patent 5000912.Nickl Titanium Martensitic Steel for Surgical Needles,1991
[12]
Bendel.Lee P.(Lebanon,NJ); Sardel.Timothy A.(Somerset,NJ)United States Patent 5000912.Nickl Titanium Martensitic Steel for Surgical Needles,1991
[13]
Bendel.Lee P,Sardelis.Timothy, Trozzo.Lawrence P,et al. U.S.Pat No 5651843,Means for Predicting Performance of Stainless Steel Alloy for Use With Surgical Needles,1996
[13]
Bendel.Lee P,Sardelis.Timothy, Trozzo.Lawrence P,et al. U.S.Pat No 5651843,Means for Predicting Performance of Stainless Steel Alloy for Use With Surgical Needles,1996
[14]
R.A.Zykova,Ya.I.Spektor, Yu.M.Politaev.Effect of Titanium on the Structure and Properties of Maraging Tool Steel 05Kh12N6D2SGTMF[J]. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, 1986,(9):48-51.
[14]
R.A.Zykova,Ya.I.Spektor, Yu.M.Politaev.Effect of Titanium on the Structure and Properties of Maraging Tool Steel 05Kh12N6D2SGTMF[J]. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, 1986,(9):48-51.
[15]
V.Seetharman, M.Sundararaman, R.Krishnan. Precipitation Hardening in a PH 13-8 Mo Stainless Steel[J].Materials Science and Engineering,1981,(47):1-11.
[15]
V.Seetharman, M.Sundararaman, R.Krishnan. Precipitation Hardening in a PH 13-8 Mo Stainless Steel[J].Materials Science and Engineering,1981,(47):1-11.
[16]
W.M.Garrison, J.A.Brooks.The thermal and mechanical stability of aystenite in low carbon martensitic steel PH13-8[J] .Materials Scinece and Engineering,1991,A149:65-72.
[16]
W.M.Garrison, J.A.Brooks.The thermal and mechanical stability of aystenite in low carbon martensitic steel PH13-8[J] .Materials Scinece and Engineering,1991,A149:65-72.
[17]
梁剑雄,宋为顺,赵先存.σ0.2≥880MPa耐海水腐蚀铁素体时效不锈钢的研究[J].钢铁,Suppl.,2001,(36):149-153(J.X.Liang,W.S.Song, X.C.Zhao. STUDY OF FERRITIC AGING STAINLESS STEEL(σ0.2≥880MPa) HAVING SEA WATER CORROSION RESISTANCE[J]. IRON AND STEEL, Suppl.,2001,(2):149-153)
[17]
梁剑雄,宋为顺,赵先存.σ0.2≥880MPa耐海水腐蚀铁素体时效不锈钢的研究[J].钢铁,Suppl.,2001,(36):149-153(J.X.Liang,W.S.Song, X.C.Zhao. STUDY OF FERRITIC AGING STAINLESS STEEL(σ0.2≥880MPa) HAVING SEA WATER CORROSION RESISTANCE[J]. IRON AND STEEL, Suppl.,2001,(2):149-153)
[18]
D.T.Peters and R.Cupp.The Kinetics of Aging Reactions in 18 Pct Ni Maraging Steel. Trans. AIME .1966,236(10):1420
[18]
D.T.Peters and R.Cupp.The Kinetics of Aging Reactions in 18 Pct Ni Maraging Steel. Trans. AIME .1966,236(10):1420
[19]
R.E.Miner, J.K.Janckson and D.F.Gibbons. Internal Friction in 18 Pct Ni Maraging Steel.Trans.AIME.1966,236(11):1565
[19]
R.E.Miner, J.K.Janckson and D.F.Gibbons. Internal Friction in 18 Pct Ni Maraging Steel.Trans.AIME.1966,236(11):1565
[20]
D.J. Abson and J.A. Whiteman. Precipitation from iron-base alloys containing cobalt[J]. Journal of The Iron and Steel Institute, 1970, (208):594-600.
[20]
D.J. Abson and J.A. Whiteman. Precipitation from iron-base alloys containing cobalt[J]. Journal of The Iron and Steel Institute, 1970, (208):594-600.
[21]
L.E. Alekseeva, G.I. Koritskaya, and E.I.Talalakina.Stabilization of Small Deformations of Maraging Steels by Steels Relaxation[J].Metallovedenie i Termicheskaya Obrabotka Metallov, Dec,1987(12):12-15.
[21]
L.E. Alekseeva, G.I. Koritskaya, and E.I.Talalakina.Stabilization of Small Deformations of Maraging Steels by Steels Relaxation[J].Metallovedenie i Termicheskaya Obrabotka Metallov, Dec,1987(12):12-15.
[22]
S.V. Grachev, A.S. Sheyn, S.V. Pavlova and N.A.Rundkvist. Infl-uence of Quenching Programmes on Phase Compostistion and Effectiveness of Subsequent Aging of Maraging Steels[J]. Phys. Met. Metall., 1988, (66) 1:151-157.
[22]
S.V. Grachev, A.S. Sheyn, S.V. Pavlova and N.A.Rundkvist. Infl-uence of Quenching Programmes on Phase Compostistion and Effectiveness of Subsequent Aging of Maraging Steels[J]. Phys. Met. Metall., 1988, (66) 1:151-157.
M.Bowkett,S.R Keown and D.R Harries.Quench- and deformation-induced structure in two austenitic stainless steels [J].Metal Science,1982,16:499~517.
[26]
M.Bowkett,S.R Keown and D.R Harries.Quench- and deformation-induced structure in two austenitic stainless steels [J].Metal Science,1982,16:499~517.
[27]
J.J.Irani,D.Dulieu.Precipitation in austenitic stainless steels containing tantalum[J].Journal of the iron and steel institute,1966, 9:1229~1238.
[27]
J.J.Irani,D.Dulieu.Precipitation in austenitic stainless steels containing tantalum[J].Journal of the iron and steel institute,1966, 9:1229~1238.
[28]
HONEYCOMBE R W K. Some strengthening mechanisms in alloy steels[R]. Metallurgical Developments in High Alloy Steels,Special Report86,The Iron and steel Ins,1964 .
[28]
HONEYCOMBE R W K. Some strengthening mechanisms in alloy steels[R]. Metallurgical Developments in High Alloy Steels,Special Report86,The Iron and steel Ins,1964 .
[29]
AYER R,MACHMEI ER P. On the characteristic of M2C carbide in the peak hardening regime of Aermat 100 steel[J].Metall and Mater Trans,1998,2,9A(3):903 -905 .
[29]
AYER R,MACHMEI ER P. On the characteristic of M2C carbide in the peak hardening regime of Aermat 100 steel[J].Metall and Mater Trans,1998,2,9A(3):903 -905 .
[30]
VASUDEVAN V K,KIM S J,C M WAYMAN.Precipitation reactions and strengthening behavior in 18 Wt Pct nickel maraging steels[J].Metall Trans,1990,2lA(10):2655—2668.
[30]
VASUDEVAN V K,KIM S J,C M WAYMAN.Precipitation reactions and strengthening behavior in 18 Wt Pct nickel maraging steels[J].Metall Trans,1990,2lA(10):2655—2668.
[31]
R.F.DECKER, S.FLOREEN. Maraging steel the first 30 years[A].In maraging steel: recent developments and application[M].Huntington West Virginia:The Minerals,Meatls & Materials Society,1988,1~38.
[31]
R.F.DECKER, S.FLOREEN. Maraging steel the first 30 years[A].In maraging steel: recent developments and application[M].Huntington West Virginia:The Minerals,Meatls & Materials Society,1988,1~38.
[32]
V.K.VASUDEVAN,S.J.KIM,C.M.WAYMAN. Precipitation reactions and strengthening behavior in 18 Wt Pct nickel maraging steels[J].Metall Trans,1900,21A(10),2655
[32]
V.K.VASUDEVAN,S.J.KIM,C.M.WAYMAN. Precipitation reactions and strengthening behavior in 18 Wt Pct nickel maraging steels[J].Metall Trans,1900,21A(10),2655