基于炉机匹配原则的周转钢包数量计算模型

doi:10.13228/j.boyuan.issn0449-749x.20140658

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (0 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要为了实现炼钢厂生产组织优化和动态有序运行，提出科学合理的周转钢包数量计算模型。以Q炼钢厂为研究对象，解析钢包周转模式，根据炼钢厂运行的“炉机匹配”原则，基于甘特图分析了转炉-连铸生产节奏与周转钢包数量间的关系，提出一定炉机匹配模式下的周转钢包数量计算模型。研究表明：缩短钢包周转柔性时间和浇次间重合时间，均可减少周转钢包数量。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	蔡峻
	汪红兵
	田乃媛

关键词 ：炼钢厂, 炉机匹配, 生产控制, 周转钢包, 计算模型

Abstract：In order to optimize the production organization and dynamic-orderly operation in the steel-making plant，a scientifically reasonable calculation model for the number of turnover ladles was proposed. The turnover process of steel ladles was analyzed in Q steel-making plant. Based on furnace-caster matching principle，the relationship between the production rhythm of furnace-caster and the number of turnover ladles was analyzed with Gantt chart. A calculation model for the number of turnover ladles was proposed for some specific modes of furnace-caster matching. The research showed that the number of turnover ladles can be reduced by shortening flexible time of turnover ladles and overlap time between casting heats.

Key words： steel-making plant Furnace-Caster matching production control turnover ladle calculation model

收稿日期: 2014-11-05 出版日期: 2015-07-06

PACS:

TF758

引用本文:

蔡峻，汪红兵，田乃媛，徐安军，贺东风. 基于炉机匹配原则的周转钢包数量计算模型[J]. 钢铁, 2015, 50(7): 61-68. CAI Jun，WANG Hong-bing，TIAN Nai-yuan，XU An-jun，HE Dong-feng. Calculation model for the turnover number of steel ladles based on furnace-caster matching principle. Iron and Steel, 2015, 50(7): 61-68.

链接本文:

http://www.chinamet.cn/Jweb_gt/CN/10.13228/j.boyuan.issn0449-749x.20140658 或 http://www.chinamet.cn/Jweb_gt/CN/Y2015/V50/I7/61

[1]	殷瑞钰.冶金工序功能的演进和钢厂结构的优化[J].金属学报, 1993, 29(7):51-
[1]	殷瑞钰.冶金工序功能的演进和钢厂结构的优化[J].金属学报, 1993, 29(7):51-
[2]	YIN Rui yu.The evolution of the metallurgical processes function and the optimization of the steel structure. Acta Metall Sin,
[2]	YIN Rui yu.The evolution of the metallurgical processes function and the optimization of the steel structure. Acta Metall Sin,
	[3].
	[3].
[4]	TANG Lixin, WANG Gongshu.Decision support system for the batching problems of steelmaking and continuous-casting production[J].Omega, 2008, 36(6):976-980
[4]	TANG Lixin, WANG Gongshu.Decision support system for the batching problems of steelmaking and continuous-casting production[J].Omega, 2008, 36(6):976-980
[5]	Bellabdaoui A, Teghem J.A mixed-integer linear programming model for the continuous casting planning[J].International Journal of Production Economics, 2006, 104(2):260-270
[5]	Bellabdaoui A, Teghem J.A mixed-integer linear programming model for the continuous casting planning[J].International Journal of Production Economics, 2006, 104(2):260-270
[6]	Mohanty P P.An agent-oriented approach to resolve the production planning complexities for a modern steel manufacturing system[J].Int J Adv Manuf Technol, 2004, 24(3-4):199-205
[6]	Mohanty P P.An agent-oriented approach to resolve the production planning complexities for a modern steel manufacturing system[J].Int J Adv Manuf Technol, 2004, 24(3-4):199-205
[7]	ZHU Daofei, ZHENG Zhong, GAO Xiaoqiang.Intelligent optimization-based production planning and simulation analysis for steelmaking and continuous casting process[J]. Journal of Iron and Steel Research, International. 2010, 17(9): 19-24.
[7]	ZHU Daofei, ZHENG Zhong, GAO Xiaoqiang.Intelligent optimization-based production planning and simulation analysis for steelmaking and continuous casting process[J]. Journal of Iron and Steel Research, International. 2010, 17(9): 19-24.
[8]	Keshari K, Mukhopadhyay B, Das P C.Superheat control with efficient ladle management // 14th IAS Steelmaking Conference. San Nicolas, 2003: 395.
[8]	Keshari K, Mukhopadhyay B, Das P C.Superheat control with efficient ladle management // 14th IAS Steelmaking Conference. San Nicolas, 2003: 395.
[9]	刘青, 赵平, 吴晓东，等.钢包的运行控制[J].北京科技大学学报, 2005, 27(2):235-
[9]	刘青, 赵平, 吴晓东，等.钢包的运行控制[J].北京科技大学学报, 2005, 27(2):235-
[10]	LIU Qing, ZHAO Ping, WU Xiao dong, et al.Control strategy for ladle running[J].Journal of University of Science and Technology Beijing, 2005, 27(2):235-
[10]	LIU Qing, ZHAO Ping, WU Xiao dong, et al.Control strategy for ladle running[J].Journal of University of Science and Technology Beijing, 2005, 27(2):235-
[11]	刘青, 田乃媛, 侯文义.转炉炼钢厂钢包转运的物理模型[J].北京科技大学学报, 1999, 21(4):338-
[11]	刘青, 田乃媛, 侯文义.转炉炼钢厂钢包转运的物理模型[J].北京科技大学学报, 1999, 21(4):338-
[12]	LIU Qing, TIAN Naiyuan, HOU Wenyi, et al.Physical model of ladle cycling for converter plant[J].Journal of University of Science and Technology Beijing, 1999, 21(4):338-
[12]	LIU Qing, TIAN Naiyuan, HOU Wenyi, et al.Physical model of ladle cycling for converter plant[J].Journal of University of Science and Technology Beijing, 1999, 21(4):338-
[13]	王锋，田乃媛，贺东风，等.连铸机开浇前备包现象的讨论[J].钢铁, 2008, 43(3):41-
[13]	王锋，田乃媛，贺东风，等.连铸机开浇前备包现象的讨论[J].钢铁, 2008, 43(3):41-
[14]	WANG Feng, TIAN Naiyuan, HE Dongfeng, et al.Discussion on full ladle preparation for sequential casting[J].Iron and Steel, 2008, 43(3):41-
[14]	WANG Feng, TIAN Naiyuan, HE Dongfeng, et al.Discussion on full ladle preparation for sequential casting[J].Iron and Steel, 2008, 43(3):41-
[15]	蔡峻，贺东风，汪红兵，等.基于浇次计划的钢包周转数量计算模型[J].重庆大学学报, 2013, 36(11):59-66
[15]	蔡峻，贺东风，汪红兵，等.基于浇次计划的钢包周转数量计算模型[J].重庆大学学报, 2013, 36(11):59-66
[16]	CAI Jun, HE Dongfeng, WANG Hongbing, et al.Calculation model for the turnover number of steel ladle based on casting schedule[J].Chongqing: Chongqing University, 2013, 36(11):59-66
[16]	CAI Jun, HE Dongfeng, WANG Hongbing, et al.Calculation model for the turnover number of steel ladle based on casting schedule[J].Chongqing: Chongqing University, 2013, 36(11):59-66
[17]	王金明, 张坤, 吕胜会.运用甘特图确定不锈钢连浇炉数[J].山东冶金, 2009, 31(5):83-
[17]	王金明, 张坤, 吕胜会.运用甘特图确定不锈钢连浇炉数[J].山东冶金, 2009, 31(5):83-
[18]	WANG Jinming, ZHANG Kun, LV Shenghui.Determining stainless steel continuous casting heats by Gantt chart[J]. Shandong Metall. 2009, 31(5): 83.
[18]	WANG Jinming, ZHANG Kun, LV Shenghui.Determining stainless steel continuous casting heats by Gantt chart[J]. Shandong Metall. 2009, 31(5): 83.
[19]	贺东风, 于港, 徐安军等.基于精准设计的甘特图组合产能核算[J]. 北京科技大学学报. 2010, 32(12): 1618-1622.
[19]	贺东风, 于港, 徐安军等.基于精准设计的甘特图组合产能核算[J]. 北京科技大学学报. 2010, 32(12): 1618-1622.
[20]	HE Dongfeng, YU Gang, XU Anjun, et al.Productivity calculation using Gantt chart combination based on precise design[J]. Journal of University of Science and Technology Beijing. 2010, 32(12): 1618-1622.
[20]	HE Dongfeng, YU Gang, XU Anjun, et al.Productivity calculation using Gantt chart combination based on precise design[J]. Journal of University of Science and Technology Beijing. 2010, 32(12): 1618-1622.