（1. National Engineering Research Center for Equipment and Technology of Cold Rolling Strip，Yanshan University，Qinhuangdao 066004，Hebei，China 2. State Key Laboratory of Metastable Materials Science and Technology，Yanshan University，Qinhuangdao 066004，Hebei，China）
Abstract：The optimization of roll profile is an effective way to improve the rolling mill’s flatness and thickness profile control ability. However，the ability and precision of grinding machine is limited，so the deviation between the object roll profile and the actual grinding profile is inevitable，which will weak the application effect of roll profile. Aimed to the problem，the deviation distribution regularities are analyzed，and then two improvement measures including the offset and tilt compensation of targeted roll profile are put forward，which reduces significantly the mean square error between the object roll profile and the actual grinding profile，and the asymmetry of roll profile is basically eliminated，so the application effect of roll profile is improved. The results provide valuable reference for grinding roll profile with fixed deviation pattern.
收稿日期: 2016-05-09
出版日期: 2016-12-09
引用本文:
张 龙，王东城，马晓宝，王志杰，张 帅. 带钢冷轧机辊型曲线磨削精度改进措施[J]. 钢铁, 2016, 51(12): 47-52.
ZHANG Long，WANG Dong-cheng，，MA Xiao-bao，WANG Zhi-jie，ZHANG Shuai. Improvement measures of roll’s curve grinding precision for cold strip mill. Iron and Steel, 2016, 51(12): 47-52.
何安瑞,杨荃,陈先霖,等. 热带钢轧机非对称工作辊的研制与应用[J]. 北京科技大学学报, 2008, 30 (7): 805-809.He An-rui, YANG Quan, Chen Xian-lin, et al. Development and application of the asymmetry work roll for hot strip mills[J]. Journal of University of Science and Technology Beijing , 2008, 30(7): 805-809.
[1]
何安瑞,杨荃,陈先霖,等. 热带钢轧机非对称工作辊的研制与应用[J]. 北京科技大学学报, 2008, 30 (7): 805-809.He An-rui, YANG Quan, Chen Xian-lin, et al. Development and application of the asymmetry work roll for hot strip mills[J]. Journal of University of Science and Technology Beijing , 2008, 30(7): 805-809.
[2]
邵建,何安瑞,杨荃,等. 高强度管线钢热轧板形控制技术的研究[J]. 钢铁, 2008, 43 (2): 61-64.SHAO Jian, He An-rui, YANG Quan, et al. Research on controlling profile and flatness of high strength pipeline steel in hot rolling[J]. Iron and Steel, 2008, 43(2): 61-64.
[2]
邵建,何安瑞,杨荃,等. 高强度管线钢热轧板形控制技术的研究[J]. 钢铁, 2008, 43 (2): 61-64.SHAO Jian, He An-rui, YANG Quan, et al. Research on controlling profile and flatness of high strength pipeline steel in hot rolling[J]. Iron and Steel, 2008, 43(2): 61-64.
[3]
李洪波,张杰,曹建国,等. CSP热连轧机支承辊辊型研究[J]. 钢铁, 2008, 43 (3): 61-64.Li Hong-bo, ZHANG Jie,Cao Jian-guo, et al. Study on the backup roll contour for csp continuous hot rolling mill[J]. Iron and Steel, 2008, 43(3): 61-64.
[3]
李洪波,张杰,曹建国,等. CSP热连轧机支承辊辊型研究[J]. 钢铁, 2008, 43 (3): 61-64.Li Hong-bo, ZHANG Jie,Cao Jian-guo, et al. Study on the backup roll contour for csp continuous hot rolling mill[J]. Iron and Steel, 2008, 43(3): 61-64.
[4]
陈先霖,张杰,张清东等. 宽带钢热连轧机板形控制系统的开发[J]. 钢铁, 2000, 35 (7): 28-35.Chen Xian-lin, ZHANG Jie, Zhang Qing-dong, et al. Development in profile and flatness control system of hot strip mills[J]. Iron and Steel, 2000, 35(7): 28-35.
[4]
陈先霖,张杰,张清东等. 宽带钢热连轧机板形控制系统的开发[J]. 钢铁, 2000, 35 (7): 28-35.Chen Xian-lin, ZHANG Jie, Zhang Qing-dong, et al. Development in profile and flatness control system of hot strip mills[J]. Iron and Steel, 2000, 35(7): 28-35.
[5]
李俊洪,邓菡,周三保,等. HC轧机辊型曲线优化[J]. 钢铁, 2009, 44 (11):64-66.Li Jun-hong, DENG Han, Zhou San-bao, et al. Optimization for roll profiles of hc-mill[J]. Iron and Steel, 2009, 44(11): 64-66.
[5]
李俊洪,邓菡,周三保,等. HC轧机辊型曲线优化[J]. 钢铁, 2009, 44 (11):64-66.Li Jun-hong, DENG Han, Zhou San-bao, et al. Optimization for roll profiles of hc-mill[J]. Iron and Steel, 2009, 44(11): 64-66.
[6]
白振华,连家创,刘峰,等. 宝钢2050热轧厂平整机辊型优化技术的研究[J]. 钢铁, 2002, 37 (9): 35-38.Bai Zhen-hua, Lian Jia-chuang, LIU Feng, et al. Research of the roll crown optimization on skin pass mill in baosteel 2050 hot rolling plant[J]. Iron and Steel, 2002, 37(9): 35-38.
[6]
白振华,连家创,刘峰,等. 宝钢2050热轧厂平整机辊型优化技术的研究[J]. 钢铁, 2002, 37 (9): 35-38.Bai Zhen-hua, Lian Jia-chuang, LIU Feng, et al. Research of the roll crown optimization on skin pass mill in baosteel 2050 hot rolling plant[J]. Iron and Steel, 2002, 37(9): 35-38.
[7]
于斌,岳晓丽,余广夫,等.热连轧机支承辊辊型的多目标优化设计及应用[J]. 钢铁, 2008, 43 (5): 51-54.YU Bin, Yue Xiao-li, Yu Guang-fu, et al. Multi-objective optimization design and application of back-up roll contour for hot strip mill[J]. Iron and Steel, 2008, 43(5): 51-54.
[7]
于斌,岳晓丽,余广夫,等.热连轧机支承辊辊型的多目标优化设计及应用[J]. 钢铁, 2008, 43 (5): 51-54.YU Bin, Yue Xiao-li, Yu Guang-fu, et al. Multi-objective optimization design and application of back-up roll contour for hot strip mill[J]. Iron and Steel, 2008, 43(5): 51-54.
张映辉. 浅谈HERKULES轧辊磨床磨削工艺优化[J]. 机床与液压, 2011, 39(12): 132-133.ZHANG Ying-hui. process optimization of herkules roll grinder[J]. Machine Tool & Hydraulics, 2011, 39(12): 132-133.
[9]
张映辉. 浅谈HERKULES轧辊磨床磨削工艺优化[J]. 机床与液压, 2011, 39(12): 132-133.ZHANG Ying-hui. process optimization of herkules roll grinder[J]. Machine Tool & Hydraulics, 2011, 39(12): 132-133.
[10]
王恩睿,周素强,吝章国,等.高表面质量带钢轧辊磨削工艺研究[J]. 南方金属, 2014(5).Wang En-rui, Zhou Su-qiang, Lin Zhang-guo, et al. Study on the roll grinding process for cold rolled strip with high surface quality[J]. Southern Metals, 2014(5).
[10]
王恩睿,周素强,吝章国,等.高表面质量带钢轧辊磨削工艺研究[J]. 南方金属, 2014(5).Wang En-rui, Zhou Su-qiang, Lin Zhang-guo, et al. Study on the roll grinding process for cold rolled strip with high surface quality[J]. Southern Metals, 2014(5).
[11]
梁超.冷轧轧辊磨削研究[J]. 酒钢科技, 2011, 12(2): 323-327.LIANG Chao. Study on the roll grinding process for cold rolling[J]. Jiugang Technoligy, 2011, 12(2): 323-327.
[11]
梁超.冷轧轧辊磨削研究[J]. 酒钢科技, 2011, 12(2): 323-327.LIANG Chao. Study on the roll grinding process for cold rolling[J]. Jiugang Technoligy, 2011, 12(2): 323-327.
[12]
祖志勇, 高身杰. 冷轧机工作辊磨削工艺研究[J]. 科技风, 2014, (11).Zu Zhi-yong, Gao Shen-jie. Research on grinding technology of work-roll in cold rolling mill[J]. Technology Wind, 2014, (11).
[12]
祖志勇, 高身杰. 冷轧机工作辊磨削工艺研究[J]. 科技风, 2014, (11).Zu Zhi-yong, Gao Shen-jie. Research on grinding technology of work-roll in cold rolling mill[J]. Technology Wind, 2014, (11).
[13]
赵章献, 王东城, 王鹏飞, 等. 板形仪位置误差补偿模型的研究及应用[J]. 钢铁, 2015, 50(3):49-53. ZHAO Zhang-xian, WANG Dong-cheng. WANG Peng-fei, et al. Research and application of position error compensation model for shape meter[J]. Iron and Steel, 2015, 50(3): 49-53.
[13]
赵章献, 王东城, 王鹏飞, 等. 板形仪位置误差补偿模型的研究及应用[J]. 钢铁, 2015, 50(3):49-53. ZHAO Zhang-xian, WANG Dong-cheng. WANG Peng-fei, et al. Research and application of position error compensation model for shape meter[J]. Iron and Steel, 2015, 50(3): 49-53.
2016, Vol. 51 
