Disposal of city combustible solid waste by blast furnace
LONG Hong-ming1,2,WEI Ru-fei2,LI Ning2,ZHOU Di2,MENG Qing-min2,LI Jia-xin1,2
(1. Key Laboratory of Metallurgical Emission Reduction and Resource Utilization, Ministry of Education, Anhui University of Technology, Ma’anshan 243002, Anhui, China 2. School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan 243002, Anhui, China)
Abstract:Serious pollution to the environment is caused by the increasing city combustible solid waste,and how to effectively deal with them has become a major problem. The chemical composition,the calorific value,the combustion characteristics and research status of city combustible solid waste were discussed. The city combustible solid waste mixed injection was put forward based on the physicochemical properties and processing properties of city combustible solid waste,which could bring new fuel for the blast furnace, dispose many kinds of city combustible solid waste,complete the solid waste disposal on the surrounding society,and expand the social function of steel plant in the city.
收稿日期: 2017-06-09
出版日期: 2018-03-16
引用本文:
龙红明,魏汝飞,李 宁,周 笛,孟庆民,李家新,. 高炉炼铁协同处理城市可燃固废[J]. , 2018, 53(3): 1-9.
LONG Hong-ming,,WEI Ru-fei,LI Ning,ZHOU Di,MENG Qing-min,LI Jia-xin,. Disposal of city combustible solid waste by blast furnace. Iron and Steel, 2018, 53(3): 1-9.
Wei R, Zhang L, Cang D, et al.Current status and potential of biomass utilization in ferrous metallurgical industry[J]. Renewable and Sustainable Energy Reviews. 2017, 68: 511-524.
[13]
Wei R, Zhang L, Cang D, et al.Current status and potential of biomass utilization in ferrous metallurgical industry[J]. Renewable and Sustainable Energy Reviews. 2017, 68: 511-524.
Janz J, Weiss W.Injection of waste plastics into the blast furnace of Stahlwerke Bremen[J]. Metallurgical Research & Technology. 1996, 100(3): 271-279.
[22]
Janz J, Weiss W.Injection of waste plastics into the blast furnace of Stahlwerke Bremen[J]. Metallurgical Research & Technology. 1996, 100(3): 271-279.
Li X G, Ma B G, Xu L, et al.Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres[J]. Thermochimica Acta. 2006, 441(1): 79-83.
[27]
Li X G, Ma B G, Xu L, et al.Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres[J]. Thermochimica Acta. 2006, 441(1): 79-83.
[28]
Williams P T, Brindle A J.Temperature selective condensation of tyre pyrolysis oils to maximise the recovery of single ring aromatic compounds ☆ ☆[J]. Fuel. 2003, 82(9): 1023-1031.
[28]
Williams P T, Brindle A J.Temperature selective condensation of tyre pyrolysis oils to maximise the recovery of single ring aromatic compounds ☆ ☆[J]. Fuel. 2003, 82(9): 1023-1031.
Machado J G M S, Osório E, Vilela A C F, et al.Reactivity and Conversion Behaviour of Brazilian and Imported Coals, Charcoal and Blends in view of their Injection into Blast Furnaces[J]. Steel Research International. 2010, 81(1): 9-16.
[31]
Machado J G M S, Osório E, Vilela A C F, et al.Reactivity and Conversion Behaviour of Brazilian and Imported Coals, Charcoal and Blends in view of their Injection into Blast Furnaces[J]. Steel Research International. 2010, 81(1): 9-16.
[32]
Babich A, Senk D, Fernandez M.Charcoal Behaviour by Its Injection into the Modern Blast Furnace[J]. Isij International. 2010, 50(1): 81-88.
[32]
Babich A, Senk D, Fernandez M.Charcoal Behaviour by Its Injection into the Modern Blast Furnace[J]. Isij International. 2010, 50(1): 81-88.
[33]
Ng K W, Giroux L, Macphee T, et al.Combustibility of charcoal for direct injection in blast furnace ironmaking[J]. Iron and Steel Technology. 2012, 9(3): 90-98.
[33]
Ng K W, Giroux L, Macphee T, et al.Combustibility of charcoal for direct injection in blast furnace ironmaking[J]. Iron and Steel Technology. 2012, 9(3): 90-98.
[34]
Mathieson J G, Rogers H, Somerville M, et al.Use of biomass in the iron and steel industry–an Australian perspective[Z]. Düsseldorf, Germany: 2011.
[34]
Mathieson J G, Rogers H, Somerville M, et al.Use of biomass in the iron and steel industry–an Australian perspective[Z]. Düsseldorf, Germany: 2011.