Process optimization for improving hit rate of BOF end-point temperature in Huaigang Works
WANG Peng1，WU Wei1，MENG Hua-dong1，YIN Chuan-lei2 ，LI Xiang-chen1
（1. Metallurgical Technology Research Department， Central Iron and Steel Research Institute， Beijing 100081， China 2. Huaigang Special Steel Co.， Ltd.， Huai’an 223002， Jiangsu， China）
Abstract：To solve the problems of low BOF end-point temperature hit rate and high consumption of slag materials， the smelting process was optimized for a 100 t converter in Huaigang. The main measures include the selection of oxygen lance nozzle parameters， the determination of lance height in smelting process， addition time of slag material and mode optimization of bottom blowing process. The oxygen lance parameters were optimized according to actual working oxygen pressure. The low-high-low lance height model was used and total lance height increased 0.1 m compared with original process. The amount of slag materials was controlled， and the lime and light burned dolomite were 27 and 12 kg/t （steel）. The bottom blowing rate of converter increased from 0.02 to 0.1 m3/（t·min）. The industrial test results show that temperature hit rate of BOF end-point was improved by 39.87%， the dephosphorization rate was improved by 2.58%， the total slagging materials consumption was reduced by about 8.5 kg /t（steel） and the smelting time was shortened by 0.53 min. By means of petrographic analysis， the total free calcium oxide in the slag of the new process is controlled at about 5%， which is more stable than that of the old process.
收稿日期: 2017-07-28
出版日期: 2018-03-16
引用本文:
王 鹏，吴 伟，孟华栋，印传磊，李相臣. 提高淮钢转炉终点温度命中率的工艺优化[J]. , 2018, 53(3): 96-103.
WANG Peng，WU Wei，MENG Hua-dong，YIN Chuan-lei ，LI Xiang-chen. Process optimization for improving hit rate of BOF end-point temperature in Huaigang Works. Iron and Steel, 2018, 53(3): 96-103.
Bernard O.Chukwulebe.The Methods, Aims and Practices(MAP) for BOF Endpoint Control[J].AISTech, 2007, -(-):69-69
[2]
Bernard O.Chukwulebe.The Methods, Aims and Practices(MAP) for BOF Endpoint Control[J].AISTech, 2007, -(-):69-69
[3]
Michitaka KANEMOT.Application of Mathematical Model for Predicting Microstructural Evolution to High Carbon Steels[J].ISIJ International, 1990, 2(30):128-135
[3]
Michitaka KANEMOT.Application of Mathematical Model for Predicting Microstructural Evolution to High Carbon Steels[J].ISIJ International, 1990, 2(30):128-135
[4]
孙江波.基于烟气分析的转炉动态控制模型[D]. 河北联合大学，2014:65.
[4]
孙江波.基于烟气分析的转炉动态控制模型[D]. 河北联合大学，2014:65.
[5]
Stephan Hofinger.Steel Expert Takes Command - Optimized Performance on BOF Converter[J].AISTech, 2012, -(-):925-933
[5]
Stephan Hofinger.Steel Expert Takes Command - Optimized Performance on BOF Converter[J].AISTech, 2012, -(-):925-933
2018, Vol. 53 
