Thermodynamics of desulfurization and industrial trials for refining of 304 stainless steel with low basicity slag
HAN Shao-wei1,2,GUO Jing1,2,CHEN Xing-run3 ,GUO Han-jie1,2,DUAN Sheng-chao1,2
(1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China 2. Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials, Beijing 100083, China 3. Stainless Steel Branch, Hongxing Iron and Steel Co., Ltd., Jiuquan Iron and Steel (Group)Co., Ltd., Jiayuguan 735100, Gansu, China)
Abstract:In order to reduce the surface defects of ultra-thin stainless steel plate, and choose the appropriate process for 304 stainless steel which can meet requirements of desulfurization as well as inclusions plasticization, the activity of component in refining slag for 304 stainless steel and the predicted sulfur distribution ratio[LS]were calculated based on the ion and molecule coexistence theory. The measured[LS]and the calculated[LS]were compared, and the calculated[LS]of AOD desulfurization stage and LF final stage were found to be in good agreement with the measured[LS.] The chemistries of slag was investigated with variation of the basicity of refining slag. With the basicity increasing from 1.4 to 2.4, the activity of CaO increased linearly. The lowest theoretical[R]of the refining slag in different conditions is given, which has certain guiding significance to the actual production. Due to the poor ability of low basicity slag for desulfurization, the operation process of AOD refining with high basic slag and LF refining with low basicity slag was put forward, and the industrial experiment was verified. The result shows that the mass percent of sulfur meets the requirements and inclusions in steel show low liquidus temperature. This process provides the possibility of reducing the surface defects for ultra-thin stainless steel plate.
韩少伟,郭 靖,陈兴润,郭汉杰,段生朝,. 低碱度渣冶炼304不锈钢脱硫热力学和工业试验[J]. , 2018, 53(6): 47-52.
HAN Shao-wei,,GUO Jing,,CHEN Xing-run ,GUO Han-jie,,DUAN Sheng-chao,. Thermodynamics of desulfurization and industrial trials for refining of 304 stainless steel with low basicity slag. Iron and Steel, 2018, 53(6): 47-52.