Parameter optimization of shape setting model and application of control technology
LI Bo-qun1, FAN Xuan1, LI Wei-hong1 , ZHANG Da-qing1, FAN Chui-lin2
1. School of Electronic and Information Engineering, University of Science and Technology Liaoning, Anshan 114051, Liaoning, China; 2. Strip Hot Rolling Mill, Anshan Iron and Steel Co., Ltd.,
Anshan 114001, Liaoning, China)
Abstract:The shape set model is a very important part of the automatic shape control system,and it determines the accuracy of strip head profile and flatness. The shape precision is not only an important quality index in the hot strip rolling,but also decides the market competitiveness of the product. The shape control strategy has been a core technology in the hot strip mill,which is a hot topic for rolling research. The structure and function of the PC shape set control system are described about 1780ASP,whose parameters of hot roller crown model have been optimized. The feedback of the strip crown and flatness is introduced in model self-learning for standers,which can effectively improve the accuracy of the shape set model. Due to the non-linearity and time-varying of the practical rolling process,the traditional PID control is close to the limit. In order to further improve the control quality,the flatness feedback of the strip adopts the nonlinear PID control strategy,which has a wide range of parameters tuning and is easy to realize in engineering. The production data has shown that the shape control precision was improved after application of the optimization program.
李伯群, 范 璇, 李伟红, 张大庆, 范垂林. 板形设定模型参数优化与控制技术应用[J]. 钢铁, 2019, 54(2): 41-47.
LI Bo-qun1, FAN Xuan1, LI Wei-hong1,ZHANG Da-qing1, FAN Chui-lin2. Parameter optimization of shape setting model and application of control technology. Iron and Steel, 2019, 54(2): 41-47.
孙一康.冷热轧板带轧机的模型与控制[M].北京:冶金工业出版社,2016.SUN Yi-Kang. Model and Control in Hot and Cold Strip Mill[M]. Beijing: Metallurgy Industry Press,2016.
[1]
孙一康.冷热轧板带轧机的模型与控制[M].北京:冶金工业出版社,2016.SUN Yi-Kang. Model and Control in Hot and Cold Strip Mill[M]. Beijing: Metallurgy Industry Press,2016.
[2]
孙宝,张小平.基于的动态规划在热连轧板形板厚协调控制中的应用[J].中北大学学报自然科学版, 2010, 31(2):193-199.SUN Bao, ZHANG Xiao-ping.Application of Dynamic Programming on Coordination Control of Strip Shape and Thickness in Hot Continuous Rolling Based on Matlab[J].Journal of North University of China(natural science edition), 2010, 31(2):193-199.
[2]
孙宝,张小平.基于的动态规划在热连轧板形板厚协调控制中的应用[J].中北大学学报自然科学版, 2010, 31(2):193-199.SUN Bao, ZHANG Xiao-ping.Application of Dynamic Programming on Coordination Control of Strip Shape and Thickness in Hot Continuous Rolling Based on Matlab[J].Journal of North University of China(natural science edition), 2010, 31(2):193-199.
[3]
刘天武,何安瑞, 杨荃等.平坦度反馈控制系统在热连轧中的应用[J].冶金自动化, 2010, 34(4):22-26.LIU Tian-wu, HE An-rui, YANG Quan, et al.Application of flatness feedback control system to hot tandem rolling[J].Metallurgical Industry Automation, 2010, 34(4):22-26.
[3]
刘天武,何安瑞, 杨荃等.平坦度反馈控制系统在热连轧中的应用[J].冶金自动化, 2010, 34(4):22-26.LIU Tian-wu, HE An-rui, YANG Quan, et al.Application of flatness feedback control system to hot tandem rolling[J].Metallurgical Industry Automation, 2010, 34(4):22-26.
[4]
Guo Zhang-feng, Xu Jian-zhang, Li Chang-sheng, Liu Xiang-hua.Shape Setup System for 1700 Hot Strip Mill, Journal of Iron and Steel Research, International[J].2007, 14(5):27-30.
[4]
Guo Zhang-feng, Xu Jian-zhang, Li Chang-sheng, Liu Xiang-hua.Shape Setup System for 1700 Hot Strip Mill, Journal of Iron and Steel Research, International[J].2007, 14(5):27-30.
[5]
Mohieddine Jelali.Performance assessment of control systems in rolling mill-application to strip thickness and flatness control[J].Journal of Process Control, 2007(17):805-816.
[5]
Mohieddine Jelali.Performance assessment of control systems in rolling mill-application to strip thickness and flatness control[J].Journal of Process Control, 2007(17):805-816.
[6]
赵旭亮,安雯筠,陆正宏等.热带常规轧机工作辊辊形曲线的研究[J].轧钢, 2008, 25(5):10-12.ZHAO Xu-liang, AN Wen-jun, LU Zheng-hong, et al.Research on Work Roll Contour of Conventional Hot Strip Mill[J].Steel Rolling, 2008, 25(5):10-12.
[6]
赵旭亮,安雯筠,陆正宏等.热带常规轧机工作辊辊形曲线的研究[J].轧钢, 2008, 25(5):10-12.ZHAO Xu-liang, AN Wen-jun, LU Zheng-hong, et al.Research on Work Roll Contour of Conventional Hot Strip Mill[J].Steel Rolling, 2008, 25(5):10-12.
[7]
邵健,何安瑞, 杨荃等.热连轧机板形设定控制系统仿真及应用[J].钢铁研究学报, 2008, 20(6):53-56.SHAO Jian, HE An-rui, YANG Quan, et al.Simulation and Application of Shape Set Control System in Hot Tandem Rolling Mill[J].Journal of Iron and Steel Research, 2008, 20(6):53-56.
[7]
邵健,何安瑞, 杨荃等.热连轧机板形设定控制系统仿真及应用[J].钢铁研究学报, 2008, 20(6):53-56.SHAO Jian, HE An-rui, YANG Quan, et al.Simulation and Application of Shape Set Control System in Hot Tandem Rolling Mill[J].Journal of Iron and Steel Research, 2008, 20(6):53-56.
[8]
李海军,赵旭亮, 徐建忠等.带钢热连轧机板形预设定策略[J].钢铁研究学报, 2009, 21(10):18-21.LI Hai-jun, ZHAO Xu-liang, XU Jian-zhong, et al.Strip Shape Preset Strategy for Hot Tandem Mill[J].Journal of Iron and Steel Research, 2009, 21(10):18-21.
[8]
李海军,赵旭亮, 徐建忠等.带钢热连轧机板形预设定策略[J].钢铁研究学报, 2009, 21(10):18-21.LI Hai-jun, ZHAO Xu-liang, XU Jian-zhong, et al.Strip Shape Preset Strategy for Hot Tandem Mill[J].Journal of Iron and Steel Research, 2009, 21(10):18-21.
[9]
许磊,曾庆亮, 胡贤磊等.中厚板轧机轧制力自学习模型的应用[J]. 钢铁研究学报,2009(12):17-19.XU Lei, CENG Qingliang, HU Xianlei, et al. Application of self-learning model for rolling force of plate mill [J].Journal of Iron and Steel Research, 2009 (12):17-19.
[9]
许磊,曾庆亮, 胡贤磊等.中厚板轧机轧制力自学习模型的应用[J]. 钢铁研究学报,2009(12):17-19.XU Lei, CENG Qingliang, HU Xianlei, et al. Application of self-learning model for rolling force of plate mill [J].Journal of Iron and Steel Research, 2009 (12):17-19.
[10]
刘金琨.先进PID控制及其仿真[M].北京:电子工业出版社,2016,100-104. Liu J K. Advanced PID Control and MATLAB Simulation[M].Beijing: Publishing House of Electronics Industry, 2016,100-104.
[10]
刘金琨.先进PID控制及其仿真[M].北京:电子工业出版社,2016,100-104. Liu J K. Advanced PID Control and MATLAB Simulation[M].Beijing: Publishing House of Electronics Industry, 2016,100-104.