Effect of secondary cold rolling reduction rate on microstructure and properties of tinplate
FANG Yuan1,2, MO Zhi-ying3, SUN Chao-fan1, WU Zhi-guo1, LIU Wei3, SONG Hao1
1. Research Institute of Technology, Shougang Group Co., Ltd., Beijing 100043, China; 2. Beijing Key Laboratory of Green Recyclable Process for Iron and steel Production Technology, Beijing 100043, China; 3. Tinplate Department, Shougang Jingtang United Iron and Steel Co., Ltd., Tangshan 063200, Hebei, China)
Abstract:In order to develop secondary cold-rolled tinplate,effects of the secondary cold rolling reduction on the microstructure and properties of the tinplate were studied by the hardness tester,tensile tester,optical microscope,transmission electron microscope and X-ray diffractometer. The results showed that as the secondary cold rolling reduction rate increasing,the hardness and strength of the test steel increased,the anisotropy increases,and the elongation decreased. When the secondary cold rolling reduction rate was 20%,the higher hardness and elongation match could be reached. At the same time,the secondary cold rolling reduction had a significant influence on the texture. When the secondary cold rolling reduction rate was between 20% and 40%,the highest orientation density in the α-orientation line appeared between {223}〈110〉 and {445}〈110〉,which could reach 6.2. And with the secondary cold rolling reduction rate increasing,the {111}〈110〉 orientation density in the γ-oriented line gradually decreased from 3.1 to 2.7,and the {111}〈112〉 orientation density gradually increased from 4.9 to 5.3.
方 圆, 莫志英, 孙超凡, 吴志国, 刘 伟, 宋 浩. 二次冷轧压下率对镀锡板组织和性能的影响[J]. 钢铁, 2019, 54(2): 48-52.
FANG Yuan1,2, MO Zhi-ying3, SUN Chao-fan1, WU Zhi-guo1, LIU Wei3, SONG Hao1. Effect of secondary cold rolling reduction rate on microstructure and properties of tinplate. Iron and Steel, 2019, 54(2): 48-52.
Guan Xiaojun etal.A Study on Optimization Process-ing Parameters for Extra Low-Carbon Hihg Strength Steel Sheet with Bake-Hardenability[C].Proc. of the 4th ICTP,Beijing,China,1993:1861-1866.
[7]
Guan Xiaojun etal.A Study on Optimization Process-ing Parameters for Extra Low-Carbon Hihg Strength Steel Sheet with Bake-Hardenability[C].Proc. of the 4th ICTP,Beijing,China,1993:1861-1866.