Abstract: In order to improve the insulation effect of the large cylinder induction heating device,a large cylinder induction heating resistor insulation device was designed. In order to improve the induction heating effect of large cylinder,the induction heating process route of large cylinder is studied by considering the Curie point effect of the metal during the induction heating,and an electromagnetic-thermal-stress coupling mathematical model of the large cylinder is established. The effect of the large cylinder induction heating and resistance insulation,the traditional heating process and the heating effect under the induction heating process considering Curie point effect are analyzed based on the finite element method. The results show that the double design of the induction heating resistor insulation device and the induction heating route considering the Curie point effect greatly shortens the thermal insulation time of the large cylinder at the high temperature stage. The maximum equivalent stress of the inner and outer surfaces of the large cylinder during heating is greatly reduced, and the heat treatment effect of the large cylinder is improved.
孙建亮, 李 硕, 焦云静, 孙孟乾, 张新有. 基于居里点效应的大型筒节感应加热工艺技术[J]. 钢铁, 2019, 54(5): 78-85.
SUN Jian-liang, LI Shuo, JIAO Yun-jing, SUN Meng-qian, ZHANG Xin-you. Large cylinder induction heating process technology based on Curie point effect. Iron and Steel, 2019, 54(5): 78-85.
华林,黄兴高,朱春东. 环件轧制理论和技术[m].北京:机械工业出版社, 2001.HUA Lin, HUANG Xinggao, ZHU Chundong. Ring rolling theory and technology[M]. Beijing, Mechanical Industry Press, 2001.
[1]
华林,黄兴高,朱春东. 环件轧制理论和技术[m].北京:机械工业出版社, 2001.HUA Lin, HUANG Xinggao, ZHU Chundong. Ring rolling theory and technology[M]. Beijing, Mechanical Industry Press, 2001.
[2]
Yasuhiko Tanaka, Ikuo Sato, Development of high large forgings for nuclear power plants, Journal of Nuclear Materials. 2011,417(1-3):854-859.
[2]
Yasuhiko Tanaka, Ikuo Sato, Development of high large forgings for nuclear power plants, Journal of Nuclear Materials. 2011,417(1-3):854-859.
[3]
PEI Xinhua, ZHOU Liping, LIU Xuewen. Analysis of edge microstructure characteristics and stamping formability of low carbon pickled steel sheets [J]. Baosteel Technical Research. 2014, 8(2):36-40.
[3]
PEI Xinhua, ZHOU Liping, LIU Xuewen. Analysis of edge microstructure characteristics and stamping formability of low carbon pickled steel sheets [J]. Baosteel Technical Research. 2014, 8(2):36-40.
[4]
GUAN Yingping, WANG Zhenhua, et al. Mechanism and inhibition of grain coarsening of Al-Mg-Si Alloy in hot forming [J]. Journal of Harbin Institute of Technology: New Series. 2013,20(3):67-74.
[4]
GUAN Yingping, WANG Zhenhua, et al. Mechanism and inhibition of grain coarsening of Al-Mg-Si Alloy in hot forming [J]. Journal of Harbin Institute of Technology: New Series. 2013,20(3):67-74.
[5]
Liu Yu-rong,Ye Dong,Yong Qi-long. Effect of heat treatment on microstructure and property of Cr13 super martensitic stainless steel [J]. Journal of Iron and Steel Research,International. 2011,18(11):60-66.
[5]
Liu Yu-rong,Ye Dong,Yong Qi-long. Effect of heat treatment on microstructure and property of Cr13 super martensitic stainless steel [J]. Journal of Iron and Steel Research,International. 2011,18(11):60-66.
[6]
M.C. Song, Y.H. Moon, Coupled electromagnetic and thermal analysis of induction heating for the forging of marine crankshafts, Applied Thermal Engineering. 98(2016) 98-109.
[6]
M.C. Song, Y.H. Moon, Coupled electromagnetic and thermal analysis of induction heating for the forging of marine crankshafts, Applied Thermal Engineering. 98(2016) 98-109.
[7]
H.S. Park, X.P. Dang, A study on the heating process for forging of an automotive crankshaft in terms of energy efficiency, Forty Sixth CIRP Conference on Manufacturing Systems. 2013(7)646-651.
[7]
H.S. Park, X.P. Dang, A study on the heating process for forging of an automotive crankshaft in terms of energy efficiency, Forty Sixth CIRP Conference on Manufacturing Systems. 2013(7)646-651.
[8]
HAN Yi, WEN Huaiyu, YU Enlin, Study on electromagnetic heating process of heavy duty sprockets with circular coils and profile coils, Applied Thermal Engineering, 100(2016) 861-868.
[8]
HAN Yi, WEN Huaiyu, YU Enlin, Study on electromagnetic heating process of heavy duty sprockets with circular coils and profile coils, Applied Thermal Engineering, 100(2016) 861-868.
[9]
孙建亮,张永振,等. 大型筒节台阶式临界区正火热处理工艺[J].钢铁. 2015, 50 (8) :65-70.SUN Jianliang, ZHANG Yongzhen, et al. Step type critical region normalizing heat treatment process of heavy cylinder [J]. Iron and Steel, 2015, 50(8): 65-70.
[9]
孙建亮,张永振,等. 大型筒节台阶式临界区正火热处理工艺[J].钢铁. 2015, 50 (8) :65-70.SUN Jianliang, ZHANG Yongzhen, et al. Step type critical region normalizing heat treatment process of heavy cylinder [J]. Iron and Steel, 2015, 50(8): 65-70.
[10]
SUN Jian-liang, LI Shuo, et al. Numerical and experimental investigation of induction heating process of heavy cylinder [J]. Applied Thermal Engineering, 2018, 134, 341-352.
[10]
SUN Jian-liang, LI Shuo, et al. Numerical and experimental investigation of induction heating process of heavy cylinder [J]. Applied Thermal Engineering, 2018, 134, 341-352.
[11]
孙建亮,邱丑武,毕雪峰,王实. 感应加热与传统加热模式大型筒节加热效果研究[J]. 机械工程学报. 2017, 53 (10) :25-33.SUN Jianliang, QIU Chouwu, BI Xuefeng, WANG Shi. Study on heating effect of heavy cylinder with induction heating and conventional heating [J]. Journal of Mechanical Engineering. 2017, 53 (10) :25-33.
[11]
孙建亮,邱丑武,毕雪峰,王实. 感应加热与传统加热模式大型筒节加热效果研究[J]. 机械工程学报. 2017, 53 (10) :25-33.SUN Jianliang, QIU Chouwu, BI Xuefeng, WANG Shi. Study on heating effect of heavy cylinder with induction heating and conventional heating [J]. Journal of Mechanical Engineering. 2017, 53 (10) :25-33.
[12]
H Kurose, D Miyagi, et al. 3-D eddy current analysis of induction heating apparatus considering heating emission, heat conduction and temperature dependence of magnetic characteristics [J]. IEEE Transactions on Magnetics. 2009, 45(3):1847-1850.
[12]
H Kurose, D Miyagi, et al. 3-D eddy current analysis of induction heating apparatus considering heating emission, heat conduction and temperature dependence of magnetic characteristics [J]. IEEE Transactions on Magnetics. 2009, 45(3):1847-1850.
[13]
Fu Xiao-bin, Wang Ba-you, et al. Study on induction heating of workpiece before gear rolling process with different coil structures [J]. Applied Thermal Engineering. 2017, 114: 1-9.
[13]
Fu Xiao-bin, Wang Ba-you, et al. Study on induction heating of workpiece before gear rolling process with different coil structures [J]. Applied Thermal Engineering. 2017, 114: 1-9.
[14]
姜建华,郑华毅. 厚壁筒形工件连续感应热处理有限元模拟[J]. 材料热处理学报,2002, 2(23): 44-48.JIANG Jian-hua, ZHENG Hua-yi, Numerical simulation of continuous induction heat treatment of thick wall tubes by finite element method [J]. Transactions of Metal Heat Treatment, 2002, 23(2): 43-48.
[14]
姜建华,郑华毅. 厚壁筒形工件连续感应热处理有限元模拟[J]. 材料热处理学报,2002, 2(23): 44-48.JIANG Jian-hua, ZHENG Hua-yi, Numerical simulation of continuous induction heat treatment of thick wall tubes by finite element method [J]. Transactions of Metal Heat Treatment, 2002, 23(2): 43-48.