Online control technology of emulsion volume percent in double cold reduction mill
LI Xiujun1,2,CUI Yaya1,3,BAI Zhenhua1,4
(1.National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan
University, Qinhuangdao 066004, Hebei, China;2. Tinplate Plant, Baoshan Iron and Steel Co., Ltd.,Shanghai
200431, China;3. College of Mechanical and Equipment Engineering, Hebei University of Engineering,
Handan 056038, Hebei, China;4. State Key Laboratory of Metastable Materials Science and
Technology, Yanshan University, Qinhuangdao 066004, Hebei, China)
Abstract: In light of the enormous force fluctuation during the rolling acceleration and deceleration in the double cold reduction mill. After fully considered the equipment and technological characteristics of the emulsion direct application system,the effect of rolling velocity and emulsion concentration on the plateout oil film thickness,deformation zone oil film thickness,friction coefficient,forward slip,rolling force was analyzed. On this basis,the relationship between the emulsion lubrication and the rolling velocity was established. Subsequently,an online control technology of the emulsion concentration in double cold reduction mill was developed by adjusting the emulsion concentration in real time during the rolling acceleration and deceleration in the double cold reduction mill. Then,this technology was applied in a 1 220 double cold reduction mill,reduced the force and thickness fluctuation effectively and improved the rolling stability and product quality,which has further popularization and application value.
李秀军,崔亚亚,白振华. 二次冷轧机组乳化液体积分数在线控制技术[J]. 钢铁, 2019, 54(9): 79-84.
LI Xiujun1,2,CUI Yaya1,3,BAI Zhenhua1,4. Online control technology of emulsion volume percent in double cold reduction mill. Iron and Steel, 2019, 54(9): 79-84.