Abstract：In order to provide reference for heat treatment of alloy seamless tubes,the effects of heat treatment process on the micostructure and tensile strength of cold-rolled N06230 alloy seamless tubes was studied by means of optical microscopy (OM),scanning electron microscopy (SEM) and tensile test at room temperature. By OM and SEM characterization,the area percentage of M6C carbides and grain size in the range of 1 200-1 300 ℃ and holding for 0.5-5.0 h were analyzed,and the kinetic model of grain size growth was established. The results show that there are a lot of W-rich M6C carbides in the alloy,which have the characteristics of granular and dispersive distribution in the transverse direction,distributed in the chain along the rolling direction. Some M6C carbides show elliptical characteristics,and the area percentage is about 1.97%. The tensile strength of seamless tube decreases with the increase of heat treatment temperature and the prolongation of holding time.
高佩, 程晓农, 罗锐. 热处理对N06230合金无缝管组织及抗拉强度的影响[J]. 钢铁, 2019, 54(12): 89-95.
GAO Pei, CHENG Xiao-nong, LUO Rui. Effects of heat treatment on microstructure and tensile strength of N06230 alloy seamless tube. Iron and Steel, 2019, 54(12): 89-95.
Kun M O,Lv W,Tung H M,et al. Biaxial thermal creep of alloy 617 and Alloy 230 for VHTR applications[J]. Journal of Engineering Materials and Technology-Transactions of the ASME,2016,138(3):031015-1.
[1]
Klarstrom D L,Hoback G L,Ishwar V R,et al. Rejuvenation heat treatment and weld repairability studies of Haynes 230 alloy[C]//ASME Turbo Expo 2000:Power for Land,Sea and Air. Munich,Germany:Haynes International Inc,2000:5173.
[2]
毛健雄. 700 ℃超超临界机组高温材料研发的最新进展[J]. 电力建设,2013,34(8):69.(MAO Jian-xiong. Latest development of high-temperature metallic materials in 700 ℃ ultra-supercritical units[J]. Electric Power Construction,2013,34(8):69.)
[3]
Pataky G J,Sehitoglu H,Maier H J. Creep deformation and mechanisms in Haynes 230 at 800 ℃ and 900 ℃[J]. Journal of Nuclear Materials,2013,443(1/2/3):484.
[5]
Cabet C,Terlain A,Lett P,et al. High temperature corrosion of structural materials under gas-cooled reactor helium[J]. Novel Approaches to Improving High Temperature Corrosion Resistance,2015,57(2):147.
[4]
Kun M O,Lv W,Tung H M,et al. Biaxial thermal creep of alloy 617 and Alloy 230 for VHTR applications[J]. Journal of Engineering Materials and Technology-Transactions of the ASME,2016,138(3):031015-1.
[6]
Barrett P R,Ahmed R,Menon M,et al. Isothermal low-cycle fatigue and fatigue-creep of Haynes 230[J]. International Journal of Solids and Structures,2016,88/89:146.
[7]
陈石富,马惠萍,鞠泉,等. GH230合金的热疲劳行为[J]. 钢铁研究学报,2011,23(3):29.(CHEN Shi-fu,MA Hui-ping,JU Quan,et al. Thermal fatigue behavior of superalloy GH230[J]. Journal of Iron and Steel Research,2011,23(3):29.)
[8]
王伟,吕春堂,刘兵,等. Haynes 230镍基超合金高温低周疲劳寿命预测[J]. 压力容器,2018,35(5):22.(WANG Wei,LÜ Chun-tang,LIU Bing,et al. Prediction of high temperature low cycle fatigue life of Haynes 230 nickel-base superalloy[J]. Pressure Vessel Technology,2018,35(5):22.)
[9]
马惠萍,雷玖芳,王明,等. 不同La含量GH230合金的高温氧化行为[J]. 钢铁研究学报,2011,23(s2):88.(MA Hui-ping,LEI Jiu-fang,WANG Ming,et al. High temperature qxidation behavior of GH 230 alloy with different La content[J]. Journal of Iron and Steel Research,2011,23(s2):88.)
[5]
Cabet C,Terlain A,Lett P,et al. High temperature corrosion of structural materials under gas-cooled reactor helium[J]. Novel Approaches to Improving High Temperature Corrosion Resistance,2015,57(2):147.
[10]
Dudziak T,Boroń L,Deodeshmukh V,et al. Steam oxidation behavior of advanced steels and Ni-based alloys at 800 ℃[J]. Journal of Materials Engineering and Performance,2017,26(3):1044.
[6]
Barrett P R,Ahmed R,Menon M,et al. Isothermal low-cycle fatigue and fatigue-creep of Haynes 230[J]. International Journal of Solids and Structures,2016,88/89:146.
[11]
Mahaffey J,Adam D,Brittan A,et al. Corrosion of alloy Haynes 230 in high temperature supercritical carbon dioxide with oxygen impurity additions[J]. Oxidation of Metals,2016,86(5/6):567.
[7]
陈石富,马惠萍,鞠泉,等. GH230合金的热疲劳行为[J]. 钢铁研究学报,2011,23(3):29.(CHEN Shi-fu,MA Hui-ping,JU Quan,et al. Thermal fatigue behavior of superalloy GH230[J]. Journal of Iron and Steel Research,2011,23(3):29.)
[8]
王伟,吕春堂,刘兵,等. Haynes 230镍基超合金高温低周疲劳寿命预测[J]. 压力容器,2018,35(5):22.(WANG Wei,LÜ Chun-tang,LIU Bing,et al. Prediction of high temperature low cycle fatigue life of Haynes 230 nickel-base superalloy[J]. Pressure Vessel Technology,2018,35(5):22.)
[9]
马惠萍,雷玖芳,王明,等. 不同La含量GH230合金的高温氧化行为[J]. 钢铁研究学报,2011,23(s2):88.(MA Hui-ping,LEI Jiu-fang,WANG Ming,et al. High temperature qxidation behavior of GH 230 alloy with different La content[J]. Journal of Iron and Steel Research,2011,23(s2):88.)
[12]
Schneider J A,Williston D,Murphy T L,et al. Solid state joining of nickel based alloy,Haynes 230[J]. Journal of Materials Processing Technology,2015,225:492.
[10]
Dudziak T,Boroń L,Deodeshmukh V,et al. Steam oxidation behavior of advanced steels and Ni-based alloys at 800 ℃[J]. Journal of Materials Engineering and Performance,2017,26(3):1044.
[13]
Cheng C M,Chou C P,Lee I K,et al. Susceptibility to hot cracking and weldment heat treatment of Haynes 230 superalloy[J]. Journal of Materials Science and Technology,2006,22(5):685.
[11]
Mahaffey J,Adam D,Brittan A,et al. Corrosion of alloy Haynes 230 in high temperature supercritical carbon dioxide with oxygen impurity additions[J]. Oxidation of Metals,2016,86(5/6):567.
[12]
Schneider J A,Williston D,Murphy T L,et al. Solid state joining of nickel based alloy,Haynes 230[J]. Journal of Materials Processing Technology,2015,225:492.
[14]
LIU Y,HU R,LI J,et al. Characterization of hot deformation behavior of Haynes 230 by using processing maps[J]. Journal of Materials Processing Technology,2009,209(8):4020.
[15]
LIU Y,HU R,LI J,et al. Deformation characteristics of as-received Haynes 230 nickel base superalloy[J]. Materials Science and Engineering:A,2008,497(1/2):283.
[13]
Cheng C M,Chou C P,Lee I K,et al. Susceptibility to hot cracking and weldment heat treatment of Haynes 230 superalloy[J]. Journal of Materials Science and Technology,2006,22(5):685.
[14]
LIU Y,HU R,LI J,et al. Characterization of hot deformation behavior of Haynes 230 by using processing maps[J]. Journal of Materials Processing Technology,2009,209(8):4020.
[16]
JIANG L,HU R,KOU H,et al. The effect of M23C6,carbides on the formation of grain boundary serrations in a wrought Ni-based superalloy[J]. Materials Science and Engineering A,2012,536(1):37.
[15]
LIU Y,HU R,LI J,et al. Deformation characteristics of as-received Haynes 230 nickel base superalloy[J]. Materials Science and Engineering:A,2008,497(1/2):283.
[17]
BAI G,LI J HU R,et al. Effect of temperature on tensile behavior of Ni-Cr-W based superalloy[J]. Materials Science and Engineering A,2011,528(4/5):1974.
[18]
彭聪辉,常辉,胡锐,等. Haynes230高温合金的静态再结晶动力学[J]. 航空材料学报,2011,31(2):8.(PENG Cong-hui,CHANG Hui,HU Rui,et al. Static recrystallization kinetics of Haynes 230 superalloy[J]. Journal of Aeronautical Materials,2011,31(2):8.)
[19]
苏晓帆,李金山,胡锐,等. 固溶处理对热变形Haynes 230奥氏体晶粒长大的影响[J]. 铸造技术,2011,32(2):193.(SU Xiao-fan,LI Jin-shan,HU Rui,et al. Effect of solution heat treatment on the austenitic grain growth of hot deformed Haynes 230 alloy[J]. Fundry Technology,2011,32(2):193.)
[20]
XIAO X,YU L Z,FENG X G,et al. Solution treatment process of Haynes 230 cylindrical blank used for hot flow spinning[J]. Defect and Diffusion Forum,2018,4695(385):373.
[16]
JIANG L,HU R,KOU H,et al. The effect of M23C6,carbides on the formation of grain boundary serrations in a wrought Ni-based superalloy[J]. Materials Science and Engineering A,2012,536(1):37.
[21]
陈正宗,刘正东,包汉生,等. C-HRA-3耐热合金奥氏体晶粒长大动力学[J]. 钢铁,2017,52(7):64. (CHEN Zheng-zong,LIU Zheng-dong,BAO Han-sheng,et al. Kinetics of austenite grain growth in heat-resistant alloy C-HRA-3[J]. Iron and Steel,2017,52(7):64.)
[22]
张煜,赵吉庆,李莉,等. 固溶工艺对FB2转子钢晶粒长大行为的影响[J]. 钢铁研究学报,2018,30(11):916. (ZHANG Yu,ZHAO Ji-qing,LI Li,et al. Effect of solid solution treatment on grain growth behavior of FB2 rotor steel[J]. Journal of Iron and Steel Research,2018,30(11):916.)
[23]
Veverkova J,Strang A,Marchant G R,et al. High temperature microstructural degradation of Haynes Alloy 230[C]//11th International Symposium on Superalloys. Pennsylvania:The minerals,Metals and Materials Society,2008:479.
[17]
BAI G,LI J HU R,et al. Effect of temperature on tensile behavior of Ni-Cr-W based superalloy[J]. Materials Science and Engineering A,2011,528(4/5):1974.
[18]
彭聪辉,常辉,胡锐,等. Haynes230高温合金的静态再结晶动力学[J]. 航空材料学报,2011,31(2):8.(PENG Cong-hui,CHANG Hui,HU Rui,et al. Static recrystallization kinetics of Haynes 230 superalloy[J]. Journal of Aeronautical Materials,2011,31(2):8.)
[24]
毛卫民,赵新兵. 金属的再结晶与晶粒长大[M]. 北京:冶金工业出版社,1994. (MAO Wei-min,ZHAO Xin-bing. Recrystallization and Grain Growth of Metals[M]. Beijing:Metallurgical Industry Press,1994.)
[19]
苏晓帆,李金山,胡锐,等. 固溶处理对热变形Haynes 230奥氏体晶粒长大的影响[J]. 铸造技术,2011,32(2):193.(SU Xiao-fan,LI Jin-shan,HU Rui,et al. Effect of solution heat treatment on the austenitic grain growth of hot deformed Haynes 230 alloy[J]. Fundry Technology,2011,32(2):193.)
[25]
余永宁. 金属学原理[M]. 北京:冶金工业出版社,2013.(YU Yong-ning. Metallurgical Principle[M]. Beijing:Metallurgical Industry Press,2013.)
[20]
XIAO X,YU L Z,FENG X G,et al. Solution treatment process of Haynes 230 cylindrical blank used for hot flow spinning[J]. Defect and Diffusion Forum,2018,4695(385):373.
[21]
陈正宗,刘正东,包汉生,等. C-HRA-3耐热合金奥氏体晶粒长大动力学[J]. 钢铁,2017,52(7):64. (CHEN Zheng-zong,LIU Zheng-dong,BAO Han-sheng,et al. Kinetics of austenite grain growth in heat-resistant alloy C-HRA-3[J]. Iron and Steel,2017,52(7):64.)
[22]
张煜,赵吉庆,李莉,等. 固溶工艺对FB2转子钢晶粒长大行为的影响[J]. 钢铁研究学报,2018,30(11):916. (ZHANG Yu,ZHAO Ji-qing,LI Li,et al. Effect of solid solution treatment on grain growth behavior of FB2 rotor steel[J]. Journal of Iron and Steel Research,2018,30(11):916.)
[23]
Veverkova J,Strang A,Marchant G R,et al. High temperature microstructural degradation of Haynes Alloy 230[C]//11th International Symposium on Superalloys. Pennsylvania:The minerals,Metals and Materials Society,2008:479.
[24]
毛卫民,赵新兵. 金属的再结晶与晶粒长大[M]. 北京:冶金工业出版社,1994. (MAO Wei-min,ZHAO Xin-bing. Recrystallization and Grain Growth of Metals[M]. Beijing:Metallurgical Industry Press,1994.)
[25]
余永宁. 金属学原理[M]. 北京:冶金工业出版社,2013.(YU Yong-ning. Metallurgical Principle[M]. Beijing:Metallurgical Industry Press,2013.)
2019, Vol. 54 
