Research progress on low cycle fatigue properties of austenitic heat resistant steel
DAI Xin-yu1, FANG Xu-dong2,3, XU Fang-hong2,3, WEI Ying-hui1,4,5, HOU Li-feng1,5, DU Hua-yun1,5
1. College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China; 2. State Key Laboratory of Advanced Stainless Steel Materials, Taiyuan Iron and Steel (Group) Co., Ltd., Taiyuan 030003, Shanxi, China; 3. Technology Center, Shanxi Taiyuan Stainless Steel Co., Ltd., Taiyuan 030003, Shanxi, China; 4. College of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, Shanxi, China; 5. Shanxi Metal Materials Corrosion and Protection Engineering Technology Research Center, Taiyuan 030024, Shanxi, China
Abstract:In order to study the austenitic heat-resistant steel in depth,the research progress in low cycle fatigue property of austenitic heat resistant steel was introduced. The fatigue fracture characteristic of austenitic heat-resistant steel at room and high temperature was compared. Interstitial atoms,strain,temperature and stacking fault energy have great influence on the fatigue property of austenitic heat-resistant steel. In the high temperature fatigue-creep process,the key factors affecting material crack propagation and fatigue fracture is temperature and stress. In terms of fatigue life prediction,many models have been established,but there will be some deviations for some new materials. A suitable life-predicted model needs to be established.
[1] 宁保群,刘永长,殷红旗,等. 超高临界压发电厂锅炉管用铁素体耐热钢的发展现状与研究前景[J]. 材料导报,2006,20(12):83. (NING Bao-qun,LIU Yong-chang,YIN Hong-qi,et al. Development and investigation of ferritic heat resistant steels for boiler tube of the advanced power plants[J]. Materials Reports,2006,20(12):83.). [2] Beér J M. High efficiency electric power generation:The environmental role[J]. Progress in Energy and Combustion Science,2007,33(2):107. [3] 龚志华,何禛,包汉生,等. 2Cr12NiMo1W1V超临界汽轮机叶片用耐热钢的热变形行为[J]. 钢铁,2019,54(3):63. (GONG Zhi-hua,HE Zhen,BAO Han-sheng,et al. Hot deformation behavior of 2Cr12NiMo1W1V heat resistant steel used for supercritical steam turbine blades[J]. Iron and Steel,2019,54(3):63.) [4] 龚志华,王利伟,姚斌,等. 锻造工艺对2Cr11Mo1VNbN钢横纵向组织及性能的影响[J]. 钢铁,2019,54(11):88. (GONG Zhi-hua,WANG Li-wei,YAO Bin,et al. Effect of forging process on microstructure and property of 2Cr11Mo1VNbN heat-resistant steel[J]. Iron and Steel,2019,54(11):88.) [5] Asteman H,Svensson J E,Norell M,et al. Influence of water vapor and flow rate on the high-temperature oxidation of 304L;Effect of chromium oxide hydroxide evaporation[J]. Oxidation of Metals,2000,54(1):11. [6] YUAN J,WANG W,ZHANG H,et al. Investigation into the failure mechanism of chromia scale thermally grown on an austenitic stainless steel in pure steam[J]. Corrosion Science,2016,109:36. [7] Asteman H,Svensson J E,Johansson L G. Oxidation of 310 steel in H2O/O2,mixtures at 600 ℃: The effect of water-vapour-enhanced chromium evaporation[J]. Corrosion Science,2002,44(11):2635. [8] Opila E J. Volatility of common protective oxides in high-temperature water vapor:Current understanding and unanswered questions[J]. Materials Science Forum,2004,461-464:765. [9] Saunders S R J,Monteiro M,Rizzo F. The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour:A review[J]. Progress in Materials Science,2008,53(5):775. [10] 徐松乾,赵海平. 固溶处理对S30432奥氏体耐热钢中含铌析出相的影响[J]. 钢铁,2018,53(5):86. (XU Song-qian,ZHAO Hai-ping. Influence of solution treatment on precipitate bearing Nb in S30432 austenitic heat-resistant steel[J]. Iron and Steel,2018,53(5):86.) [11] 张欣杰,张欢欢,崔利民. 奥氏体不锈钢夹杂物控制工艺技术探讨[J]. 中国冶金,2018,28(1):45. (ZHANG Xin-jie,ZHANG Huan-huan,CUI Li-min. Discussion of austenitic stainless steel inclusion control technology[J]. China Metallurgy,2018,28(1):45.) [12] 刘靖,王云平. 碳含量对Cr25Ni20型奥氏体耐热钢高温氧化性能的影响[J]. 中国冶金,2019,29(2):34. (LIU Jing,WANG Yun-ping. Effect of carbon content on high-temperature oxidation properties of Cr25Ni20 austenitic heat-resistant steel[J]. China Metallurgy,2019,29(2):34.) [13] 张帆,周伟敏. 材料性能学[M]. 上海:上海交通大学出版社,2014. (ZHANG Fan,ZHOU Wei-min. Material Performance[M]. Shanghai:Shanghai Jiaotong University Press,2014.) [14] Suresh S. 材料的疲劳[M]. 北京:国防工业出版社,1999. (Suresh S. Material Fatigue[M]. Beijing:National Defense Industry Press,1999.) [15] 王志江,张卫敏,张春. 高温设备用耐热钢[J]. 压力容器,2017,38(2):44. (WANG Zhi-jiang,ZHANG Wei-min,ZHANG Chun. Heat resistant steel used in high-temperature equipment[J]. Chemical Equipment Technology,2017,38(2):44.). [16] Okayasu Mitsuhiro,Fukui Hironobu. Effects of cyclic loading on fatigue properties of austenite stainless steel[J]. Journal of Mechanical Science and Technology,2015,29(9):3663. [17] 李刚. 近年由ASME规范批准锅炉用新型奥氏体耐热钢管[J]. 锅炉制造,2018(4):39. (LI Gang. Introduction on new austenitic heat-resistant steels approved by ASME code cases in recent years[J]. Boiler Manufacturing,2018(4):39.) [18] ZHANG Zhen,HU Zheng-fei,TU Hao-yun,et al. Microstructure evolution in HR3C austenitic steel during long-term creep at 650 ℃[J]. Materials Science and Engineering:A,2017,681:74. [19] 田晓,徐慧,刘响亮,等. Super304H管材高温服役过程组织与性能的变化[J]. 动力工程学报,2016,36(8):671. (TIAN Xiao,XU Hui,LIU Xiang-liang,et al. Microstructure and mechanical properties of domestic Super304H tubes during high-temperature services[J]. Journal of Chinese Society of Power Engineering,2016,36(8):671.) [20] 田晓,秦承鹏,徐慧,等. 国产Super304 H钢高温持久后微观组织与性能[J]. 中国电力,2015,48(9):49. (TIAN Xiao,QIN Cheng-peng,XU Hui,et al. Properties and microstructure evolution of domestic Super304H steel during high temperature creep rupture testing[J]. Electric Power,2015,48(9):49.) [21] Jaroslav Polák,Roman Petrás,Guocai Chai,et al. Surface profile evolution and fatigue crack initiation in Sanicro 25 steel at room temperature[J]. Materials Science and Engineering:A,2016,658:221. [22] Polák J,MazánováV,Heczko M,et al. The role of extrusions and intrusions in fatigue crack initiation[J]. Engineering Fracture Mechanics,2017,185:46. [23] Jaroslav Polák,Roman Petrás,Milan Heczko,et al. Evolution of the cyclic plastic response of Sanicro 25 steel cycled at ambient and elevated temperatures[J]. International Journal of Fatigue,2016,83(1):75. [24] Polák J,Mazánová V,Kuběna Ivo. Surface relief and internal structure in fatigued stainless Sanicro 25 steel[J]. Metallurgical and Materials Transactions A,2016,47(5):1907. [25] Polák J,Mazánová V,Heczko M,et al. Profiles of persistent slip markings and internal structure of underlying persistent slip bands[J]. Fatigue and Fracture of Engineering Materials and Structures,2017,40(7):1101. [26] Masayuki Kamaya. Fatigue properties of 316 stainless steel and its failure due to internal cracks in low-cycle and extremely low-cycle fatigue regimes[J]. International Journal of Fatigue,2010,32(7):1081. [27] Bandstra J P,Koss D A,Geltmacher A,et al. Modeling void coalescence during ductile fracture of a steel[J]. Materials Science and Engineering:A,2004,366(2):269. [28] Wen J,Huang Y,Hwang K C,et al. The modified Gurson model accounting for the void size effect[J]. International Journal of Plasticity,2005,21(2)381. [29] Wilsius J,Imad A,Nait Abdelaziz M,et al. Void growth and damage models for predicting ductile fracture in weld[J]. Fatigue and Fracture of Engineering Materials and Structures,2001,23(2):105. [30] Goods S H, Brown L M. The nucleation of cavities by plastic deformation[J]. Acta Metallurgica,1979,27(1):1. [31] McMeeking R M. Finite deformation analysis of crack-tip opening in elastic-plastic materials and implications for fracture[J]. Journal of the Mechanics and Physics of Solids,1977,25(5):357. [32] Broek D. The role of inclusions in ductile fracture and fracture toughness[J]. Engineering Fracture Mechanics,1973,5(1):55. [33] Lee Davison,Dennis E Grady,Mohsen Shahin. High-Pressure Shock Compression of Solids II[M]. New York:Springer-Verlag New YorkInc,1996. [34] Benzerga A A,Besson J,Pineau A. Anisotropic ductile fracture:Part I:Experiments[J]. Acta Materialia,2004,52(15):4623. [35] Le Roy G,Embury J D,Edwards G,et al. A model of ductile fracture based on the nucleation and growth of voids[J]. Acta Metallurgica,1981,29(8):1509. [36] Lee W F,Chan P K. A low-cost programmable clock generator for switched-capacitor circuit applications[J]. Analog Integrated Circuits and Signal Processing,2006,47(3):247. [37] Miura H,Sakai T,Okonogi M,et al. Deformation behavior of carbon steel with dispersed fine voids at elevated temperatures[J]. Materials Science and Engineering:A,2008,483/484:590. [38] YE Du-yi,XU Yuan-dong,XIAO Lei,et al. Effects of low-cycle fatigue on static mechanical properties,microstructures and fracture behavior of 304 stainless steel[J]. Materials Science and Engineering:A,2010,527(16/17):4092. [39] Duyi Ye,Saburo Matsuoka,Noburo Nagashima,et al. The low-cycle fatigue,deformation and final fracture behaviour of an austenitic stainless steel[J]. Materials Science and Engineering:A,2006,415(1/2):104. [40] Prasad Reddy G V,Kannan R,Mariappan K,et al. Effect of strain rate on low cycle fatigue of 316LN stainless steel with varying nitrogen content:Part-I cyclic deformation behavior[J]. International Journal of Fatigue,2015,81:299. [41] Alvarez-Armas,Krupp U,Balbi M,et al. Growth of short cracks during low and high cycle fatigue in a duplex stainless steel[J]. International Journal of Fatigue,2012,41:95. [42] 丁剑,张荻,西田新一,等. 应力控制条件下奥氏体不锈钢的低周疲劳性能[J]. 金属学报,2002,38(12):1261. (DING Jian,ZHANG Di,XITIAN Xin-yi,et al. Study on low cycle fatigue property of austenitic stainless steel under stress-controlled condition[J]. Acta Metallurgica Sinica,2002,38(12):1261.) [43] 何国求,陈成澍,高庆. 316L、316LN奥氏体不锈钢的单轴低周疲劳特性及其微结构[J]. 西南交通大学学报,1996,31(3):283. (HE Guo-qiu,CHEN Cheng-shu,GAO Qing. The characteristic and microstructure of uniaxial low cycle fatigue of 316L and 316LN austenitic stainless steels[J]. Journal of Southwest Jiaotong University,1996,31(3):283.) [44] Arpan Das,Sivaprasad S,Chkraborti P C,et al. Correspondence of fracture surface features with mechanical properties in 304LN stainless steel[J]. Materials Science and Engineering:A,2008,496(1/2):98. [45] 卿琳,陈成澍,何国求. 奥氏体不锈钢的低周疲劳特性研究[J]. 燃气涡轮试验与研究,1995(1):58. (QING Lin,CHEN Cheng-shu,HE Guo-qiu. Study on low cycle fatigue properties of austenitic stainless steel[J]. Gas Turbine Experiment and Research,1995(1):58.) [46] 闫永超,陈学东,杨铁成,等. 应变强化022Cr17Ni12Mo2奥氏体不锈钢室温低周疲劳性能研究[J]. 压力容器,2011,28(12):5.(YAN Yong-chao,CHEN Xue-dong,YANG Tie-cheng,et al. Study on room temperature low-cycle fatigue of strain-strengthening austenitic stainless steels 022Cr17Ni-12Mo2[J]. Pressure Vessel Technology,2011,28(12):5.) [47] 陈成澍,何国求,陶佑卿. 40Cr-30Ni及25Cr-20Ni系列奥氏体不锈钢低周疲劳特性的研究[J]. 西南交通大学学报,1993(2):52. (CHEN Cheng-shu,HE Guo-qiu,TAO You-qing. Low cyclic fatigue characteristics of 40 Cr-30Ni series and 25 Cr-20Ni series of austenitic stainless steels[J]. Journal of Southwest Jiaotong University,1993(2):52.) [48] Guilherme Corrêa Soares,Mariana Carla Mendes Rodrigues,Leandro de Arruda Santos. Influence of temperature on mechanical properties,fracture morphology and strain hardening behavior of a 304 stainless steel[J]. Materials Research,2017,20(s2):141. [49] 罗治平,陈成澍,陶佑卿. 奥氏体钢的低周疲劳研究[J]. 材料科学与工程,1991(4):41. (LUO Zhi-ping,CHEN Cheng-shu,TAO You-qing. Low cycle fatigue study of austenitic steel[J]. Materials Science and Engineering,1991(4):41.) [50] Jaroslav Polák,Roman Petrás,Milan Heczko,et al. Low cycle fatigue behavior of Sanicro 25 steel at room and at elevated temperature[J]. Materials Science and Engineering A,2014,615:175. [51] Heczko M,Polák J,Kruml T. Microstructure and dislocation arrangements in Sanicro 25 steel fatigued at ambient and elevated temperatures[J]. Materials Science and Engineering A,2017,680:168. [52] Jaroslav Polák,Roman Petrás,Milan Heczko,et al. Analysis of cyclic plastic response of heat resistant Sanicro 25 steel at ambient and elevated temperatures[J]. Procedia Engineering,2014,74:68. [53] CHAI Guo-cai. Damage mechanism of low cycle fatigue in an advanced heat resistant austenitic stainless steel at high temperature[J]. Procedia Materials Science,2014,3:1754. [54] 田阳. 2.25Cr1MoV钢高温低周疲劳及疲劳蠕变交互作用的研究[D]. 天津:天津大学,2015. (TIAN Yang. A Study on the Low Cycle Fatigue and Fatigue-Creep Interaction Behavior of 2.25Cr1MoV Steel at Elevated Temperature[D]. Tianjin:Tianjin University,2015.) [55] Hales R. A quantitative metallographic assessment of structural degradation of type 316 stainless steel during creep-fatigue[J]. Fatigue and Fracture of Engineering Materials and Structures,1980,3(4):339. [56] Fumiyoshi Ueno,Kazumi Aoto,Yusaku Wada. Study on metallographic damage parameter in creep-damage-dominant condition under creep-fatigue loading[J]. Nuclear Engineering and Design,1996,162(1):85. [57] Junjing He,Rolf Sandström,Stojan Vujic. Creep,low cycle fatigue and creep-fatigue properties of a modified HR3C[J]. Procedia Structural Integrity,2016,2:871. [58] Prasad Reddy G V,Mariappan K,Kannan R,et al. Effect of strain rate on low cycle fatigue of 316LN stainless steel with varying nitrogen content:Part-II fatigue life and fracture[J]. International Journal of Fatigue,2015,81:309. [59] Khan F. Equipment reliability:A life-cycle approach[J]. Engineering Management Journal,2002,11(3):127. [60] Soliterman Y L,Berestnev O V,Goman A M. Reliability assessment of systems at the all stages of life cycle[J]. Key Engineering Materials,2006,326/327/328:577. [61] Dimitri V Val,Mark G Stewart,Asce M. Safety factors for assessment of existing structures[J]. Journal of Structural Engineering,2002,128(2):258. [62] Lagneborg R,Attermo R. The effect of combined low-cycle fatigue and creep on the life of austenitic stainless steels[J]. Metallurgical Transactions,1971,2(7):1821. [63] CHEN L,WANG Z,YAO G,et al. An assessment of three creep-fatigue life prediction methods for nickel-based superalloy GH4049[J]. Fatigue and Fracture of Engineering Materials and Structures,2000,23:509. [64] Goswami T. Applicability of modified Diercks equation with NRIM data[J]. High Temperature Materials and Processes,1995,14(2):81. [65] Goswami T. Low cycle fatigue life prediction-a new model[J]. International Journal of Fatigue,1997,19(2):109. [66] Sunil Goyal,Mandal S,Parameswaran P,et al. A comparative assessment of fatigue deformation behavior of 316LN SS at ambient and high temperature[J]. Materials Science and Engineering A,2007,696(1):407. [67] YUAN X,YU W,FU S,et al. Effect of mean stress and ratcheting strain on the low cycle fatigue behavior of a wrought 316LN stainless steel[J]. Materials Science and Engineering A,2016,677:193.